Page Information

    Page: How does one split / combine cryptographic keys?
    Page: How do I connect to a VP3300BT with an iOS device (Apple)?
    Page: How do I enable RRP on NEO II projects.
    Page: How do I set/check the Keyboard Polling Interval for an SREDKey?
    Page: How Do I Set the Keyboard Polling Interval on a SREDKey/SecureKey?
    Page: How Do I Set the Whitelist on VP3300 and Augusta Readers?
    Page: How do I slow down/fix the output of the reader using the Set Character Delay command/feature?
    Page: How do I update the firmware on a Spectrum Pro?
    Page: How do I update the firmware on the Augusta/MiniSmart II?
    Page: How do I verify that my Spectrum Pro is injected with a key and is encrypting MSR and EMV data?
    Page: How Do I Verify the Key in a MiniSmart II Reader?
    Page: How long do I need to wait before next swipe (SecureMag)?
    Page: How to arm reader for any card presentation (swipe, dip, tap)
    Page: How to capture / trace USB communications with an ID TECH device using BusHound?
    Page: How to Change the CVM Result from "No CVM Performed" to "Online PIN"
    Page: How to change the masked data presentation on a VP5300 (or other NEO device)? pre-PAN, post-PAN and mask character
    Page: How to change USB-KB mode data to look the same as USB-HID data?
    Page: How to check (and set) if my SecuRED is in USB/HID or USB/KB and how to check the security level?
    Page: How to check and set the date and time (RTC real time clock) on a NEO device (UniPay 1.5) in uDemo
    Page: How to Check Key Status and Key Info for NEO or NEO 2 Products
    Page: How to check MiniSmart II Key status.
    Page: How to check whether the VP5300 reader and L100 pin-pad are paired or not?
    Page: How to clone the configuration setting from a known working MiniMag II or SecureMag reader to a new reader?
    Page: How to Configure VP3300\VP8300 for Quick Chip KB (QCKB) emulation over HID?
    Page: How to connect VP3300 BT to iPhone/iPad using SDK demo app
    Page: How-to: Contactless - Configurable AIDs and Groups. Delete / Disable AIDs (NEO2)
    Page: How to control the Augusta output speed in QC USB KB mode?
    Page: How to control the pre-PAN/Post-Pan with the mag stripe mask data returned by the VP5300 via the 02-40 command?
    Page: How to control which tracks are output on SecureMag, SecureHead, MiniMag, Omni?
    Page: How to decrypt a PIN block (tag 99) using uDemo?
    Page: How to delete/disable AIDs on contactless readers
    Page: How to disable (lock) the Admin key on the SecureKey and SREDKey?
    Page: How to disable the power saving of the USB ports on my PC?
    Page: How to display a message on LCD display of Vendi reader?
    Page: How to Enable Escape Command for TM3 USB CCID driver
    Page: How to Enable RRP on NEO 2 Projects
    Page: How to Enable TransArmor on a Device
    Page: How to enable USB-HID mode on SREDKey
    Page: How to fix "Start EMV failed Error Code: 0xF212: Transaction Type Error" on Augusta USB-HID mode
    Page: How to fix the "Fail to Open" PS2 KB MSR with the latest JPOS MSR driver 80128802-002 on a Windows Embedded POSReady 7?(32bit)
    Page: How to Get and Set the Friendly Name for a VP3300BT
    Page: How to get product update notifications. How to get notified when new firmware is release.
    Page: How to get the KSN or KSI from an Augusta
    Page: How to get the updated USB serial driver for the WCR3227-xxxU series?
    Page: How to get the USB/HID TransArmor SecureMag (model: IDRE-335133B-RP) recognized correctly by Windows 8/10?
    Page: How to handle Issuer Scripts un an EMV transaction?
    Page: How to Load an EMV CAPK from a File Using uDemo
    Page: How to load (with SDK) a standard SREDKEY (IDSK-534883AEB) to Shift 4 SREDKEY (IDSK-534883AEB-S1)?
    Page: How to parse the USB/KB encrypted data correctly with Parsomatic?
    Page: How to perform a Remote Key Injection RKI
    Page: How to poll the Spectrum Pro for information?
    Page: How to program a 2D Scan (IDBA-6641LRB) to append a Tab instead of the default Enter at the end of the output?
    Page: How to program the SREDKey with a F7 as prefix and F8 as suffix?
    Page: How to read/write Mifare Plus card?
    Page: How to read/write MiFare standard( type 04) card
    Page: How to reconnect a disconnected VP3300BT?
    Page: How to re-initialize the MSR key after the VP5300 firmware upgrading?
    Page: How to reset an Augusta reader to default settings
    Page: How to reset a reader to default settings in MagSwipe Configuration Utility
    Page: How to reset default settings on MiniMag II or SecureMag
    Page: How to Retrieve the KSN from a MiniSmart II
    Page: How to save Contactless AIDs (NEO and NEO2 devices)
    Page: How to Send Configure file-Brief version?
    Page: How to Set and Update the Device Clock
    Page: How to set Device Date and Time on NEO II readers.
    Page: How to Set Kernel Config and How to Save Terminal Data using uDemo
    Page: How to set the Polling Interval on a MiniMag II?
    Page: How to switch Augusta (HID) to Augusta KB in uDemo
    Page: How to switch Augusta KB to Augusta (HID) in uDemo
    Page: How to test/demo an SREDKey?
    Page: How to test LEDs and Buzzer on a contactless (Vivo) reader?
    Page: How to troubleshoot a CDA failure
    Page: How to Turn Off the Beeper on an Augusta or Augusta S
    Page: How to update the firmware and kernel on a VP6300
    Page: How to update the Firmware for a Kiosk III?
    Page: How to update the firmware on an SREDKey?
    Page: How to update the firmware on a VP5300? (and maybe an L100 PIN pad)
    Page: How to update the out of date .dll files in the Augusta demo (or other product specific Demo)?
    Page: How to use 03-00 / 03-40 commands and parse the results
    Page: How to use Autoconfig feature in the UniMag Demo?
    Page: How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
    Page: How to use the MagSwipe Configuration software to send a manual command to the reader?
    Page: How to use the SecureMag Demo to collect the required data for troubleshooting?
    Page: How to use VC Demo to test an USB/CCID Hybrid Insert reader?
    Page: IDRE-335133BR (Transarmor SecureMag) Not Working on Windows 10
    Page: ID TECH’s Gen 1 vs Gen 2 Contact Kernels
    Page: I got the AC after the Authenticate Transaction. Is it safe to assume that the value returned in the 9F26 tag is the ARQC?
    Page: Information for MINDBODY users
    Page: Inquiring about devices - Autoconfig Issue
    Page: Integrating Applications for Multiple ID TECH SDKs
    Page: I sometimes see evidence of corruption in the returned card data...How can I fix this?
    Page: Is There a Way to Remove All Groups, AIDs, CAPKs in a NEO Product (e.g., KIOSK III)?
    Page: Mifare access example
    Page: MM2 USB/HID Rawinput Support
    Page: Mobile Reader keyboard emulation
    Page: My iMag Pro II stopped working what should I do?
    Page: My MiniSmart II does not appear in the Windows Device Manager. What can I do?
    Page: My SREDKey Displays "Key Not Injected." How Can I Fix This?
    Page: My SREDKey or SecureKey displays "Key Not Injected" when I tried to manually enter the card number and swipe a card . How can I fix this?
    Page: My SREDKey/SecureKey Screen Displays "Activating..."; What Should I Do?
    Page: My VP3300USB is stuck in USB KB mode, how do I get it back to the USB/HID mode?
    Page: My VP3600 prompts for "press key seq". What should I do?
    Page: NEO 1.2 - Home and FAQ
    Page: NEO 2 - Home and FAQ
    Page: NEO IDG Quick Reference (Rev. 151)
    Page: NGA Command_Response Protocol
    Page: NGA, MiniSmart II, How to increase the Idle Waiting Time to 4s
    Page: Pairing an VP5300 or VP5300M with an L80 and Configure it for an EMV Transaction Test
    Page: Parsomatic. How to parse TLVs? How to parse transaction data (EMV, MSR or MSD)?
    Page: PCI DSS - 13 Guidelines
    Page: Performing a Contact EMV Transaction Test with the VP5300
    Page: Performing an Offline PIN Transaction Without a PEK on the VP3600
    Page: Product Integration Topic - Augusta QuickChip KeyBoard fallback behavior
    Page: Proving NFC Peer-to-Peer messaging on a KioskIII (ISO 18092)
    Page: Pulling MSR Data with an Augusta Working in HID Buffer Mode
    Page: Q & A related to the salt keys injected into the products such as NEO II, KIOSK IV and KIOSK V (SRED and Non-SRED version units)
    Page: Requesting an RMA Number to Return Units for Repair
    Page: RKI (remote key injection) Errors:
    Page: SecureKey M130 Setting the Admin Level
    Page: Service Code and L2 common Kernel
    Page: SmartTap - Configuration command example
    Page: Spectrum Pro Chome Demo - Instructions
    Page: SREDkey vs. SREDkey 2 Comparison
    Page: There is an GPO error. How can I config tag 9F1D (Card Terminal Validations) for my MasterCard tests?
    Page: Token Request Identified (TRI) Instructions
    Page: Troubleshooting articles
    Page: Understanding PIN Pad Encryption/Decryption
    Page: Understanding the Bluetooth connection pro
    Page: UniMag Android Common Settings issues
    Page: UniMag Android SDK Manual XML Configuration
    Page: UniMag Common Issues for iOS SDK
    Page: EMV Transactions with Universal SDK
    Page: FAQ - SREDKey 2
    Page: FAQ - OMNI Readers
    Page: FAQ - SREDKey
    Page: BluScan IDBA-4243LRB: Removing the Enter at the End of Data Output
    Page: How can I check if encryption is enabled for my SecureMag/SecureHead? i.e. How do I check the security level on a SecureMag/SecureHead?
    Page: EMV L3 Certification Overview
    Page: EMV transaction, how was the card presented (Swiped, Tapped or Dipped...MSD, Fallback)?
    Page: FAQ: 2DScan FX100
    Page: FAQ - Android
    Page: FAQ - EconoScanII
    Page: Can I Use an iMagProII to Form-Fill a Website on Safari?
    Page: How Can I Use RKI (Remote Key Injection) From the uDemo?
    Page: Can I update the firmware on a SecuRED?
    Page: How to adjusting the RTC in VP5300 to make transaction times accurately reflect local time?
    Page: How to Perform an EMV Transaction Test with an Augusta/Augusta S in USB HID Mode?
    Page: How can I decrypt encrypted data?
    Page: How to Configure the Date and Time on MiniSmart II?
    Page: Do you have an example of how one might configure the VP3300 or any contactless reader for an L3 certification?
    Page: What would cause the Windows OS to fail to recognize the Augusta reader when connecting to a USB port?
    Page: Do you have a tool for calculating the CRC for a command?
    Page: How Do I Verify the Key in a SecureHead or a SecureMag?
    Page: What do the different Security Levels mean in SecureMag/SecureHead, SecureKey, SREDKey/SREDKey2?
    Page: Can ID TECH tell me what AIDs, CAPKs, and Terminal Settings I Need to Load into my EMV Reader?
    Page: FAQ - BTMag
    Page: Can I Use my ID TECH Bluetooth Reader with Windows?
    Page: How to Clear the Removal Detection Logs in an L80 Using a VP5300?
    Page: Connecting a VP3600 to iOS or Android via Bluetooth
    Page: Can an Augusta be injected with a DEK, but with encryption not enabled?
    Page: Grounding guidelines for IDTECH readers to optimize the ESD protection
    Page: FAQ - Unipay
    Page: FAQ - Magnetic Encoders and EZWriter
    Page: How Do I Enable/Disable Quick Chip for KeyBoard Emulation (QCKB) on the Augusta?
    Page: FAQ: Customer Support Portal
    Page: How do I determine if a mobile service was used to process a sale (with Apple Pay etc.)?
    Page: FAQ: Xamarin
    Page: Can SecureKey Require the User to Enter a CVV?
    Page: An Example of Accessing Mifare Classic Cards
    Page: Augusta QC KB: How Do I Set My Device's Serial Number for an EMV Transaction?
    Page: Does the VP5300 support the MasterCard Relay Resistance Protocol? If so, how to activate it?
    Page: Can the Firmware be updated on the UniPay 1.5? 
    Page: FAQ - EconoScan & Versa Scan
    Page: Do you have a extension cable that works with UniMagII/Shuttle?
    Page: Audio Jack Care
    Page: Can the SREDKey 2 be Key Injected by the Same Method as a SREDKey?
    Page: How can I get, find and retrieve EMV Tags?
    Page: FAQ - MiniMag & Easy Mag
    Page: FAQ - Encryption Decryption
    Page: Augusta, Android, and USB Keyboard Mode Integration
    Page: Examples of parsing - Vendi, Neo
    Page: FAQ - ValueScanII
    Page: FAQ - Versakey
    Page: FAQ - Spectrum Hybrid
    Page: How can I configure my contactless reader to perform Card Emulation (ISO 18092)?
    Page: How to Clear the Removal Detection Logs in an L80?
    Page: Fall back flow with L2 common Kernel
    Page: How do I check the extended firmware version for an Spectrum Pro reader?
    Page: How Do I Disable Contactless MSD Transactions?
    Page: How to update firmware on PiP
    Page: EMV L3 certification: Which test cases need to be tested, and with what configuration?
    Page: How do I set CAPKs (Certification Authority Public Keys? (L3 certification purposes)
    Page: FAQ: Mobile Card Readers
    Page: Can One VP3300 Bluetooth Reader Connect to Multiple Host Devices Simultaneously Without Disconnecting from Other Devices?
    Page: Detecting Card Insertion with a MiniSmart II
    Page: How Do I Set my Contactless Reader to Read MSD only cards?
    Page: Does the UniMag SDK have 64-bit support?
    Page: How do I enable encryption for a NEO device?
    Page: FAQ: ViVOconfig
    Page: How do I know if ODA is performed or not?
    Page: How Can I Tell if Encryption is Enabled for a VP3300?
    Page: During a contact EMV transaction, when are the ARQC, AAC, AC, and their corresponding CDOL1 generated?
    Page: FAQ: 2D Scan
    Page: FAQ: Augusta Quick Chip Keyboard (QCKB)
    Page: How Do I Pair My Spectrum Pro and L100?
    Page: FAQ: General Support
    Page: How to decrypt transaction data using test key and KSN?
    Page: FAQ - Key Injection
    Page: Cryptogram and EMV Transaction Flow
    Page: Do I need to load CAPKs for a device deployed in the US (online only market)?
    Page: How Do I Prepare My Contact/Contactless EMV Reader for EMV Transactions?
    Page: Bit and Byte Numbering
    Page: How to get RS232 interface SpectrumIII hybrid insert reader out of the PCSC mode?
    Page: How to unblock zip files in Windows 10
    Page: How can I gain an in-depth understanding of contact and contactless EMV technologies?
    Page: FAQ - How to configure a barcode scanner to give a time stamp.
    Page: How to retrieve a CVM (Card Verification Method) list?
    Page: How to disable Contactless Magstripe transactions on the reader?
    Page: How Do I Check if a VP5300 Reader and L-100 PINPad are Paired?
    Page: How can I check if my mobile device is compatible with an audio jack mobile reader?
    Page: How to test/demo a MiniSmart II using the uDemo?
    Page: How to check the extended firmware version for MiniSmart II?
    Page: How to use the Selectable Kernels feature on NEO 2 Readers (VP5300) with an example?
    Page: Contact EMV Transaction, Phase 3 of 3: Complete Transaction
    Page: How can I add an "Enter" or a carriage return to the end output of an SREDKey 2, SREDKye, or a SecureKey?
    Page: How Can I Extend the Wake Time of My VP3300 BT?
    Page: FAQ: SmartPIN L100
    Page: How do I Check and Activate Encryption on the Augusta?
    Page: How Can I Check the KSI for a VP3300?
    Page: How to turn on/off the beeping on VP3300 when the card is not removed in the dip slot?
    Page: How do I configure the ValueScan II bar code scanner to work with CurvesOS?
    Page: How to re-configure the SecureMag from the USB HID to the USB KB mode or vice versa?
    Page: How to check the battery level of the audio or BlueTooth version VP3300 reader?
    Page: How do I check the extended firmware version for an Augusta(S) reader?
    Page: How Do I Find the VID/PID (Vendor ID/Product ID) for my USB-connected reader?
    Page: PIN Block format ISO 9564 Format 0
    Page: My VP3600 displays "Need Client Key". What does it mean?
    Page: How to set the Spectrum Pro's Terminal Settings to 3C?
    Page: Instructions to set the audio configuration automatically
    Page: How to retrieve the CVC3 from Track2 contactless Mastercard transaction?
    Page: How to set Augusta Encryption Key Variant to Data or PIN Variant?
    Page: How do I configure the prefix, suffix, postamble, preamble, and start/end sentinels to an SecureMag, SecureHead (Secure line of readers) Reader?
    Page: How to output MSR track data without carriage returns (print all tracks on one-line)?
    Page: MagSwipe Configuration Utility - How to configure card reader with a configure file provided?
    Page: How to update the bootloader, firmware and kernel files of the VP5300?
    Page: I have an encrypting reader. How can I set it to leave gift cards unencrypted?
    Page: How to retrieve the entire configuration setting string from a SecuRED reader?
    Page: How do I check my encryption Status for a NEO device?
    Page: How Do I Read DESFire Cards?
    Page: How Do I Reset a PiP to Delete All Merchant IDs?
    Page: Is there some specific tracking requirements for a SRED certified device?
    Page: UniMag Demo walkthrough (Google Play app)
    Page: UniMag Utility Autoconfig Walkthrough for Android
    Page: Universal Library for Visual Studio - Home
    Page: Updating a SREDKey 2 to Bootloader v1.15 and FW v1.01.008.0392
    Page: Updating Device Security Certificates
    Page: Updating the Firmware on a VP3300USB or VP8300
    Page: Updating the VP3300 and VP8300 Kernel from 1.01 to 1.10
    Page: Updating VP3300 Readers to FW v1.10 with the VP3300 Firmware Update App
    Page: Using the MagSwipe Configuration Utility to Save or Load a Reader's Settings to or from a File
    Page: VP3300 Battery Stats
    Page: VP3300 Transition to New NFC Kernels
    Page: VP3600 Firmware: How to check the version and update
    Page: VP5300 and L100 - FAQ and Notes
    Page: VP5300 Demo Integration - What comes in the Demo kit?
    Page: VP5300 with L100, using the Universal SDK
    Page: VP6300 or NEO2 device: How to update the firmware
    Page: What applications exist that work with the iMag Pro II?
    Page: What are all the possible EMV "result codes"?
    Page: What are the "default tags" returned by uDemo? (Start transaction, Authenticate transaction, Complete transaction)
    Page: What are the "Mercury Settings"?
    Page: What are the 'PAN Entry Modes' of tag 9F39?
    Page: What are the steps to update L100 firmware?
    Page: What contactless terminal configuration is typical for VISA online only US based terminal?
    Page: What does it mean if I get FF-EE-1F when I tap a contactless card?
    Page: What does TVR mean?
    Page: What do the LEDs and beeping mean on a PIN Pad?
    Page: What Information Helps to Efficiently Troubleshoot a SREDKey Reader?
    Page: What Information Should I Provide when Requesting Technical Support?
    Page: What is an ATR?
    Page: What is Apple's MFI Program? Do I Need to Register My Application with Your Product Plan?
    Page: What is a TLV?
    Page: What is EMV Level 3 Certification?
    Page: What is "Express Transit"?
    Page: What is PCI?
    Page: What Is SRED Compliance?
    Page: What is the difference between Global Configuration TLVs and Group Configuration TLVs? Is there a priority between them?
    Page: What is the PCI DSS?
    Page: What is the pin-out for 220-2463-00 (VP8XXX Standard Serial)?
    Page: What is the pinout of the serial interface cable of your card reader (e.g. WCR3227-xxx)?
    Page: What products use NGA key injection protocol?
    Page: What proprietary tags has ID Tech defined?
    Page: What's the difference between Blue Tooth and Blue Tooth LE?
    Page: What Terminal Configuration should I use for a payment system in Japan?
    Page: What torque is recommended to mount readers that have M3 and M3.5 inserts for mounting screw?
    Page: What triggers the VP3300 reader change between the 3 different power modes?
    Page: What would happen if the reader was commanded to Enter Low Power Mode while a card is already partially inserted?
    Page: What would happen if the VP5300 reader is commanded to Enter Low Power Mode while a card is already fully inserted?
    Page: When a transaction pauses to allow the user to make a “language selection” (or other menu selection), what is the command to use when sending the line number (the selection) back to the device?
    Page: When the VP5300 is in Sleep mode, and an ICC is inserted, what will happen?
    Page: Where Can I Get Test Cards?
    Page: Where is the serial number and a Shuttle mobile reader?
    Page: Which Terminal Settings Am I Allowed to Change?
    Page: White Papers
    Page: Why aren't tags 57 and 5A returned with my EMV transaction?
    Page: Why “Can you sell me a PCI DSS Certified Reader?” is the wrong question?
    Page: Why Do ID TECH Devices Not Support Firmware Updates over Bluetooth?
    Page: Why don't I see 5F24 (Application Expiration Date) in the reader's response during EMV transaction?
    Page: Why is my VP3300 not Reading the Inserted Chip Card?
    Page: Why is Tag 8A Giving a Z3 Response Code?
    Page: Will the iMag Pro II work with an iPad Pro when connected via a lightning to USB-C converter?
    Page: With the MiniSmart II firmware upgraded to 2.00.034, I'm not getting the expected ACK when sending the Authenticate command(72460502). How do I correct this?
    Page: With VP5300, how do I know the card is inserted or not after the Transaction started?
    Page: WorldPay Integration - Home
    Page: WorldNet Integration - Home
    Page: FAQ - Payment Card Industry (PCI)
    Page: Setting Configuration Parameters and Values (ITP Protocol)
    Page: How to pair VP5300 reader with L80?

View Page History