Knowledge Base

All content
Space settings

Results will update as you type.

•
How to program the SREDKey with a F7 as prefix and F8 as suffix?
•
How to read/write Mifare Plus card?
•
How to read/write MiFare standard( type 04) card
•
How to reconnect a disconnected VP3300BT?
•
How to re-initialize the MSR key after the VP5300 firmware upgrading?
•
How to reset an Augusta reader to default settings
•
How to reset a reader to default settings in MagSwipe Configuration Utility
•
How to reset default settings on MiniMag II or SecureMag
•
How to Retrieve the KSN from a MiniSmart II
•
How to save Contactless AIDs (NEO and NEO2 devices)
•
How to Send Configure file-Brief version?
•
How to Set and Update the Device Clock
•
How to set Device Date and Time on NEO II readers.
•
How to Set Kernel Config and How to Save Terminal Data using uDemo
•
How to set the Polling Interval on a MiniMag II?
•
How to switch Augusta (HID) to Augusta KB in uDemo
•
How to switch Augusta KB to Augusta (HID) in uDemo
•
How to test/demo an SREDKey?
•
How to test LEDs and Buzzer on a contactless (Vivo) reader?
•
How to troubleshoot a CDA failure
•
How to Turn Off the Beeper on an Augusta or Augusta S
•
How to update the firmware and kernel on a VP6300
•
How to update the Firmware for a Kiosk III?
•
How to update the firmware on an SREDKey?
•
How to update the firmware on a VP5300? (and maybe an L100 PIN pad)
•
How to update the out of date .dll files in the Augusta demo (or other product specific Demo)?
•
How to use 03-00 / 03-40 commands and parse the results
•
How to use Autoconfig feature in the UniMag Demo?
•
How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
•
How to use the MagSwipe Configuration software to send a manual command to the reader?
•
How to use the SecureMag Demo to collect the required data for troubleshooting?
•
How to use VC Demo to test an USB/CCID Hybrid Insert reader?
•
IDRE-335133BR (Transarmor SecureMag) Not Working on Windows 10
•
ID TECH’s Gen 1 vs Gen 2 Contact Kernels
•
I got the AC after the Authenticate Transaction. Is it safe to assume that the value returned in the 9F26 tag is the ARQC?
•
Information for MINDBODY users
•
Inquiring about devices - Autoconfig Issue
•
Integrating Applications for Multiple ID TECH SDKs
•
I sometimes see evidence of corruption in the returned card data...How can I fix this?
•
Is There a Way to Remove All Groups, AIDs, CAPKs in a NEO Product (e.g., KIOSK III)?
•
Mifare access example
•
MM2 USB/HID Rawinput Support
•
Mobile Reader keyboard emulation
•
My iMag Pro II stopped working what should I do?
•
My MiniSmart II does not appear in the Windows Device Manager. What can I do?
•
My SREDKey Displays "Key Not Injected." How Can I Fix This?
•
My SREDKey or SecureKey displays "Key Not Injected" when I tried to manually enter the card number and swipe a card . How can I fix this?
•
My SREDKey/SecureKey Screen Displays "Activating..."; What Should I Do?
•
My VP3300USB is stuck in USB KB mode, how do I get it back to the USB/HID mode?
•
My VP3600 prompts for "press key seq". What should I do?
•
NEO 1.2 - Home and FAQ
•
NEO 2 - Home and FAQ
•
NEO IDG Quick Reference (Rev. 151)
•
NGA Command_Response Protocol
•
NGA, MiniSmart II, How to increase the Idle Waiting Time to 4s
•
Pairing an VP5300 or VP5300M with an L80 and Configure it for an EMV Transaction Test
•
Parsomatic. How to parse TLVs? How to parse transaction data (EMV, MSR or MSD)?
•
PCI DSS - 13 Guidelines
•
Performing a Contact EMV Transaction Test with the VP5300
•
Performing an Offline PIN Transaction Without a PEK on the VP3600
•
Product Integration Topic - Augusta QuickChip KeyBoard fallback behavior
•
Proving NFC Peer-to-Peer messaging on a KioskIII (ISO 18092)
•
Pulling MSR Data with an Augusta Working in HID Buffer Mode
•
Q & A related to the salt keys injected into the products such as NEO II, KIOSK IV and KIOSK V (SRED and Non-SRED version units)
•
Requesting an RMA Number to Return Units for Repair
•
RKI (remote key injection) Errors:
•
SecureKey M130 Setting the Admin Level
•
Service Code and L2 common Kernel
•
SmartTap - Configuration command example
•
Spectrum Pro Chome Demo - Instructions
•
SREDkey vs. SREDkey 2 Comparison
•
There is an GPO error. How can I config tag 9F1D (Card Terminal Validations) for my MasterCard tests?
•
Token Request Identified (TRI) Instructions
Troubleshooting articles
•
Understanding PIN Pad Encryption/Decryption
•
Understanding the Bluetooth connection pro
•
UniMag Android Common Settings issues
•
UniMag Android SDK Manual XML Configuration
•
UniMag Common Issues for iOS SDK
•
EMV Transactions with Universal SDK
•
FAQ - SREDKey 2
•
FAQ - OMNI Readers
•
FAQ - SREDKey
•
BluScan IDBA-4243LRB: Removing the Enter at the End of Data Output
•
How can I check if encryption is enabled for my SecureMag/SecureHead? i.e. How do I check the security level on a SecureMag/SecureHead?
•
EMV L3 Certification Overview
•
EMV transaction, how was the card presented (Swiped, Tapped or Dipped...MSD, Fallback)?
•
FAQ: 2DScan FX100
•
FAQ - Android
•
FAQ - EconoScanII
•
Can I Use an iMagProII to Form-Fill a Website on Safari?
•
How Can I Use RKI (Remote Key Injection) From the uDemo?
•
Can I update the firmware on a SecuRED?
•
How to adjusting the RTC in VP5300 to make transaction times accurately reflect local time?
How to Perform an EMV Transaction Test with an Augusta/Augusta S in USB HID Mode?
•
How can I decrypt encrypted data?
•
How to Configure the Date and Time on MiniSmart II?
•
Do you have an example of how one might configure the VP3300 or any contactless reader for an L3 certification?
•
What would cause the Windows OS to fail to recognize the Augusta reader when connecting to a USB port?
•
Do you have a tool for calculating the CRC for a command?
•
How Do I Verify the Key in a SecureHead or a SecureMag?
•
What do the different Security Levels mean in SecureMag/SecureHead, SecureKey, SREDKey/SREDKey2?
•
Can ID TECH tell me what AIDs, CAPKs, and Terminal Settings I Need to Load into my EMV Reader?
•
FAQ - BTMag
•
Can I Use my ID TECH Bluetooth Reader with Windows?
•
How to Clear the Removal Detection Logs in an L80 Using a VP5300?
•
Connecting a VP3600 to iOS or Android via Bluetooth
•
Can an Augusta be injected with a DEK, but with encryption not enabled?
•
Grounding guidelines for IDTECH readers to optimize the ESD protection
•
FAQ - Unipay
•
FAQ - Magnetic Encoders and EZWriter
•
How Do I Enable/Disable Quick Chip for KeyBoard Emulation (QCKB) on the Augusta?
•
FAQ: Customer Support Portal
•
How do I determine if a mobile service was used to process a sale (with Apple Pay etc.)?
•
FAQ: Xamarin
•
Can SecureKey Require the User to Enter a CVV?
•
An Example of Accessing Mifare Classic Cards
•
Augusta QC KB: How Do I Set My Device's Serial Number for an EMV Transaction?
•
Does the VP5300 support the MasterCard Relay Resistance Protocol? If so, how to activate it?
•
Can the Firmware be updated on the UniPay 1.5?
•
FAQ - EconoScan & Versa Scan
•
Do you have a extension cable that works with UniMagII/Shuttle?
•
Audio Jack Care
•
Can the SREDKey 2 be Key Injected by the Same Method as a SREDKey?
•
How can I get, find and retrieve EMV Tags?
•
FAQ - MiniMag & Easy Mag
•
FAQ - Encryption Decryption
•
Augusta, Android, and USB Keyboard Mode Integration
•
Examples of parsing - Vendi, Neo
•
FAQ - ValueScanII
•
FAQ - Versakey
•
FAQ - Spectrum Hybrid
•
How can I configure my contactless reader to perform Card Emulation (ISO 18092)?
•
How to Clear the Removal Detection Logs in an L80?
•
Fall back flow with L2 common Kernel
•
How do I check the extended firmware version for an Spectrum Pro reader?
•
How Do I Disable Contactless MSD Transactions?
•
How to update firmware on PiP
•
EMV L3 certification: Which test cases need to be tested, and with what configuration?
•
How do I set CAPKs (Certification Authority Public Keys? (L3 certification purposes)
FAQ: Mobile Card Readers
•
Can One VP3300 Bluetooth Reader Connect to Multiple Host Devices Simultaneously Without Disconnecting from Other Devices?
•
Detecting Card Insertion with a MiniSmart II
•
How Do I Set my Contactless Reader to Read MSD only cards?
•
Does the UniMag SDK have 64-bit support?
•
How do I enable encryption for a NEO device?
•
FAQ: ViVOconfig
•
How do I know if ODA is performed or not?
•
How Can I Tell if Encryption is Enabled for a VP3300?
•
During a contact EMV transaction, when are the ARQC, AAC, AC, and their corresponding CDOL1 generated?
•
FAQ: 2D Scan
•
FAQ: Augusta Quick Chip Keyboard (QCKB)
•
How Do I Pair My Spectrum Pro and L100?
•
FAQ: General Support
•
How to decrypt transaction data using test key and KSN?
•
FAQ - Key Injection
•
Cryptogram and EMV Transaction Flow
•
Do I need to load CAPKs for a device deployed in the US (online only market)?
•
How Do I Prepare My Contact/Contactless EMV Reader for EMV Transactions?
•
Bit and Byte Numbering
•
How to get RS232 interface SpectrumIII hybrid insert reader out of the PCSC mode?

draw.io Diagrams

You‘re viewing this with anonymous access, so some content might be blocked.

/

FAQ - SREDKey 2

FAQ - SREDKey 2

Owned by IT-ADMIN G (Deactivated)

Last updated: Jan 26, 2024 by Yan Mu

Loading data...

Page:

SREDkey vs. SREDkey 2 Comparison
Page:

How to Decrypt Credit Card Data, Part II
Page:

How to Decrypt Credit Card Data, Part I
Page:

How can I add an "Enter" or a carriage return to the end output of an SREDKey 2, SREDKye, or a SecureKey?
Page:

How to decrypt transaction data using test key and KSN?
Page:

How can I decrypt encrypted data?

{"serverDuration": 23, "requestCorrelationId": "b56bc9cfd9af48fe91835bb9f8d2db01"}