NEO IDG Quick Reference (Rev. 151)
1. Quick Reference
This section contains tables for looking up commands, status codes, and error codes.
1.1. Command Tables
The tables in this section organize the commands by their names and by their command number.
1.1.1. Commands Sorted by Command Name
Table 2: Commands Sorted by Command Name
Command | C’less or C’less + MSR | LCD | Line | US | EMV | Protocol | CMD | SUB CMD | Notes |
√ | √ | √ | √ | √ | 2 | 02 | 01 | ||
√ | √ | √ | √ | √ | 2 | 02 | 40 | ||
√ | √ | √ | √ | √ | 2 | 84 | 09 | ||
√ | √ | √ | √ | √ | 2 | 84 | 04 | ||
√ | √ | √ | √ | √ | 2 | 28 | 01 | ||
√ | √ | √ | √ | √ | 2 | 14 | 01 | ||
√ | √ | √ | √ | √ | 2 | 0B | 02 | ||
√ | √ | √ | √ | √ | 2 | 0B | 01 | ||
√ | n/a | √ | 2 | F0 | FE | a | |||
√ | √ | √ | √ | √ | 2 | 05 | 01 | ||
√ | √ | √ | √ | √ | 2 | 81 | 04 | ||
√ | √ | √ | √ | √ | 2 | 81 | 02 | ||
√ | √ | √ | √ | √ | 2 | 84 | 0F | ||
√ | √ | √ | √ | √ | 2 | 2C | 52 | ||
√ | √ | √ | 2 | F0 | F4 | a | |||
√ | √ | √ | 2 | 60 | 12 | ||||
√ | √ | √ | 2 | 60 | 11 | ||||
√ | √ | √ | 2 | 61 | 03 | ||||
√ | √ | √ | 2 | 61 | 02 | ||||
√ | √ | √ | 2 | 60 | 14 | ||||
√ | √ | √ | 2 | 61 | 01 | ||||
√ | √ | √ | 2 | 60 | 02 | b | |||
√ | √ | √ | 2 | 60 | 09 | b | |||
√ | √ | √ | 2 | 60 | 0D | b | |||
√ | √ | √ | 2 | 60 | 05 | b | |||
√ | √ | √ | 2 | 60 | 07 | b | |||
√ | √ | √ | 2 | 60 | 01 | b | |||
√ | √ | √ | 2 | 60 | 0A | b | |||
√ | √ | √ | 2 | 60 | 0B | b | |||
√ | √ | √ | 2 | 60 | 0C | b | |||
√ | √ | √ | 2 | 60 | 04 | b | |||
√ | √ | √ | 2 | 60 | 13 | b | |||
√ | √ | √ | 2 | 60 | 03 | b | |||
√ | √ | √ | 2 | 60 | 0A | b | |||
√ | √ | √ | 2 | 60 | 0E | b | |||
√ | √ | √ | 2 | 60 | 06 | b | |||
√ | √ | √ | 2 | 60 | 10 | b | |||
√ | √ | √ | 2 | 60 | 15 | b | |||
√ | √ | √ | 2 | 60 | 0F | b | |||
√ | √ | √ | 2 | 60 | 16 | b | |||
√ | √ | √ | 2 | 01 | 02 | ||||
2 | 02 | 58 | |||||||
2 | 02 | 09 | |||||||
√ | √ | √ | √ | 1 | 24 | 03 | |||
√ | √ | √ | √ | 2 | D0 | 05 | |||
√ | √ | √ | √ | 2 | 84 | 05 | |||
√ | √ | √ | √ | 2 | 84 | 0B | |||
√ | √ | √ | √ | 2 | 84 | 06 | |||
√ | √ | √ | √ | 1 | 24 | 02 | |||
√ | √ | √ | √ | 2 | D0 | 04 | |||
√ | √ | √ | √ | √ | 2 | 04 | 04 | c | |
√ | √ | √ | √ | √ | 2 | 04 | 05 | c | |
√ | √ | √ | √ | √ | 2 | 84 | 0A | ||
√ | √ | √ | √ | 2 | F0 | F6 | |||
√ | √ | √ | 2 | F0 | F7 | a | |||
√ | √ | √ | √ | √ | 2 | 2C | 0B | ||
√ | √ | √ | √ | √ | 2 | 2C | 0C | ||
√ | 2C | 13 | |||||||
√ | √ | √ | √ | √ | 2 | 2C | 03 | ||
√ | √ | √ | √ | √ | 2 | 2C | 41 | ||
√ | √ | √ | √ | √ | 2 | 2C | 42 | ||
Felica Lite/Lite-S Read/Write Blocks with MAC | √ | √ | √ | √ | √ | 2 | 2C | 43 | |
√ | √ | √ | √ | √ | 1 | 17 | 02 | ||
√ | √ | √ | √ | √ | 2 | C7 | 33 | ||
√ | √ | √ | √ | √ | 2 | 03 | 05 | c | |
√ | √ | √ | √ | √ | 2 | D0 | 06 | ||
√ | √ | √ | √ | √ | 2 | 03 | 07 | c | |
√ | √ | √ | √ | √ | 2 | 09 | 00 | ||
√ | 2C | 12 | |||||||
√ | √ | √ | 2 | F0 | F5 | c | |||
√ | √ | √ | √ | √ | 2 | 32 | 01 | ||
√ | √ | √ | √ | √ | 2 | D0 | 02 | ||
√ | √ | √ | √ | √ | 2 | D0 | 01 | ||
√ | √ | √ | √ | √ | 2 | 03 | 0C | ||
√ | √ | √ | √ | √ | 2 | 03 | 0D | ||
√ | √ | √ | √ | √ | 2 | 03 | 04 | c | |
√ | √ | √ | √ | √ | 2 | 03 | 06 | c | |
√ | √ | √ | √ | √ | 2 | 03 | 02 | ||
√ | √ | √ | √ | √ | 2 | 29 | 08 | ||
√ | √ | √ | √ | √ | 2 | 29 | 06 | ||
√ | √ | √ | √ | √ | 2 | 29 | 07 | ||
√ | √ | √ | √ | √ | 2 | 29 | 09 | ||
√ | √ | √ | √ | √ | 2 | 03 | 0E | ||
Get DUKPT Key Serial Number (KSN) | √ | √ | √ | √ | √ | 2 | 81 | 0A | |
√ | √ | √ | √ | √ | 2 | 81 | 0B | ||
√ | √ | √ | √ | √ | 2 | 84 | 0C | ||
√ | √ | √ | √ | √ | 2 | 84 | 08 | ||
√ | √ | √ | √ | √ | 2 | 84 | 07 | ||
√ | √ | √ | √ | √ | 2 | 84 | 03 | ||
62 | 01 | ||||||||
√ | √ | √ | √ | √ | 1 | 29 | 00 | ||
√ | √ | √ | √ | √ | 1 | 17 | CD | ||
√ | √ | √ | √ | √ | 2 | 09 | 14 | ||
√ | √ | √ | √ | 2 | C7 | 37 | |||
√ | √ | √ | √ | 2 | C7 | 30 | |||
Get DUKPT Key Serial Number (KSN) | √ | √ | √ | √ | √ | 2 | 81 | 0A | |
√ | √ | √ | √ | √ | 2 | 03 | 11 | ||
√ | √ | √ | √ | √ | 2 | 09 | 20 | ||
√ | √ | √ | √ | √ | 2 | 09 | 03 | a | |
√ | 2 | C7 | 39 | a | |||||
√ | √ | √ | √ | √ | 2 | 2C | 05 | ||
√ | √ | √ | √ | √ | 2 | 09 | 02 | ||
√ | √ | √ | √ | √ | 2 | 09 | 01 | a | |
√ | √ | √ | √ | √ | 2 | C7 | 2E | ||
√ | √ | √ | 2 | 12 | 01 | ||||
√ | √ | √ | √ | √ | 2 | 03 | 00 | ||
√ | √ | √ | √ | √ | 2 | 03 | 40 | ||
√ | √ | √ | √ | √ | 2 | 29 | 17 | ||
√ | √ | √ | √ | √ | 2 | 29 | 04 | e | |
√ | √ | √ | √ | √ | 2 | 2C | 51 | ||
√ | √ | √ | √ | √ | 2 | 2C | 09 | ||
√ | n/a | √ | 2 | F0 | F9 | a | |||
√ | n/a | √ | 2 | F0 | FC | a | |||
√ | n/a | √ | 2 | F0 | FD | a | |||
√ | √ | √ | √ | √ | 2 | 0A | 02 | ||
√ | √ | √ | √ | √ | 2 | D0 | 07 | ||
√ | √ | √ | √ | √ | 2 | 2C | 06 | ||
√ | √ | √ | √ | √ | 2 | 2C | 0A | ||
√ | √ | √ | √ | √ | 2 | 2C | 07 | ||
√ | √ | √ | √ | √ | 2 | 2C | 08 | ||
√ | √ | √ | √ | √ | 2 | 2C | 40 | ||
√ | √ | √ | √ | √ | 2 | 2C | 01 | ||
√ | √ | √ | √ | √ | 2 | 2C | 04 | ||
√ | √ | √ | √ | √ | 2 | 2C | 0F | ||
√ | √ | √ | √ | √ | 2 | C7 | 9A | ||
√ | √ | √ | √ | √ | 2 | C7 | 9B | ||
√ | √ | √ | √ | √ | 2 | 84 | 0E | ||
√ | √ | √ | √ | 1 | 25 | 04 | d | ||
√ | √ | √ | √ | 1 | 25 | 02 | d | ||
√ | √ | √ | √ | 1 | 25 | 03 | d | ||
√ | √ | √ | √ | 1 | 25 | 01 | d | ||
√ | √ | √ | √ | √ | 2 | C7 | 32 | ||
√ | √ | √ | √ | √ | 2 | 30 | 01 | ||
√ | √ | √ | √ | 1 | 24 | 01 | |||
√ | √ | √ | √ | 2 | D0 | 03 | |||
√ | √ | √ | √ | √ | 2 | 04 | 0C | ||
√ | √ | √ | √ | √ | 2 | 04 | 0D | ||
√ | √ | √ | √ | √ | 2 | 32 | 02 | ||
√ | √ | √ | √ | √ | 2 | 04 | 02 | c | |
√ | √ | √ | √ | √ | 2 | 04 | 03 | c | |
√ | √ | √ | √ | √ | 2 | 04 | 00 | ||
√ | √ | √ | √ | √ | 2 | 04 | 0A | ||
√ | √ | √ | √ | √ | 2 | 04 | 0E | ||
√ | √ | √ | √ | √ | 2 | C7 | 36 | ||
√ | √ | √ | √ | √ | 2 | C7 | 2F | ||
√ | √ | √ | √ | √ | 2 | 04 | 11 | ||
√ | 2 | C7 | 38 | a | |||||
2 | 04 | 09 | |||||||
√ | √ | √ | √ | √ | 2 | 01 | 01 | ||
√ | √ | √ | √ | √ | 2 | C7 | 2D | ||
√ | √ | √ | √ | √ | 1 | 17 | 03 | ||
√ | √ | √ | 2 | 12 | 02 | ||||
√ | √ | √ | √ | √ | 2 | 01 | 05 | ||
√ | √ | √ | √ | √ | 2 | 30 | 02 | ||
√ | √ | √ | √ | √ | 2 | 2C | 50 | ||
√ | √ | √ | √ | √ | 2 | 05 | 02 | ||
√ | n/a | √ | 2 | F0 | FA | a | |||
√ | n/a | √ | 2 | F0 | FB | a | |||
√ | √ | √ | √ | 2 | 03 | 03 |
a ViVOpay Vendi reader only
b Contact EMV products only
c Not in Global Reader Lite (GRL)
d Real Time Clock only
e Only applies to devices with USB
1.1.2. Commands Sorted by Command Number
All commands in the following table use Protocol 2 formats (see Protocol 2 Formats) except for Get Full Track Data, Set RF Error Reporting, and Get ViVOpay Firmware Version.
Table 3: Commands Sorted by Command Number
CMD | SUB CMD | Command | C’less or C’less + MSR | LCD | Line | US | EMV | Protocol | Notes |
01 | 01 | √ | √ | √ | √ | √ | 2 | ||
01 | 02 | √ | √ | √ | 2 | ||||
01 | 05 | √ | √ | √ | √ | √ | 2 | ||
02 | 01 | √ | √ | √ | √ | √ | 2 | ||
02 | 09 | 2 | |||||||
02 | 40 | √ | √ | √ | √ | √ | 2 | ||
02 | 58 | 2 | |||||||
03 | 00 | √ | √ | √ | √ | √ | 2 | ||
03 | 40 | √ | √ | √ | √ | √ | 2 | ||
03 | 02 | √ | √ | √ | √ | √ | 2 | ||
03 | 03 | √ | √ | √ | √ | 2 | |||
03 | 04 | √ | √ | √ | √ | √ | 2 | c | |
03 | 05 | √ | √ | √ | √ | √ | 2 | c | |
03 | 06 | √ | √ | √ | √ | √ | 2 | c | |
03 | 07 | √ | √ | √ | √ | √ | 2 | c | |
03 | 0C | √ | √ | √ | √ | √ | 2 | ||
03 | 0D | √ | √ | √ | √ | √ | 2 | ||
03 | 0E | √ | √ | √ | √ | √ | 2 | ||
03 | 11 | √ | √ | √ | √ | √ | 2 | ||
03 | 40 | √ | √ | √ | √ | √ | 2 | ||
04 | 00 | √ | √ | √ | √ | √ | 2 | ||
04 | 02 | √ | √ | √ | √ | √ | 2 | c | |
04 | 03 | √ | √ | √ | √ | √ | 2 | c | |
04 | 04 | √ | √ | √ | √ | √ | 2 | c | |
04 | 05 | √ | √ | √ | √ | √ | 2 | c | |
04 | 09 | 2 | |||||||
04 | 0A | √ | √ | √ | √ | √ | 2 | ||
04 | 0C | √ | √ | √ | √ | √ | 2 | ||
04 | 0D | √ | √ | √ | √ | √ | 2 | ||
04 | 0E | √ | √ | √ | √ | √ | 2 | ||
04 | 11 | √ | √ | √ | √ | √ | 2 | ||
05 | 01 | √ | √ | √ | √ | √ | 2 | ||
05 | 02 | √ | √ | √ | √ | √ | 2 | ||
09 | 00 | √ | √ | √ | √ | √ | 2 | ||
09 | 01 | √ | √ | √ | √ | √ | 2 | ||
09 | 02 | √ | √ | √ | √ | √ | 2 | ||
09 | 03 | √ | √ | √ | √ | √ | 2 | ||
09 | 14 | √ | √ | √ | √ | √ | 2 | ||
09 | 20 | √ | √ | √ | √ | √ | 2 | ||
0A | 02 | √ | √ | √ | √ | √ | 2 | ||
0B | 01 | √ | √ | √ | √ | √ | 2 | ||
0B | 02 | √ | √ | √ | √ | √ | 2 | ||
12 | 01 | √ | √ | √ | √ | √ | 2 | ||
12 | 02 | √ | √ | √ | √ | √ | 2 | ||
14 | 01 | √ | √ | √ | √ | √ | 2 | ||
18 | 01 | √ | √ | √ | √ | √ | 2 | ||
25 | 01 | √ | √ | √ | √ | 1 | d | ||
25 | 02 | √ | √ | √ | √ | 1 | d | ||
25 | 03 | √ | √ | √ | √ | 1 | d | ||
25 | 04 | √ | √ | √ | √ | 1 | d | ||
28 | 01 | √ | √ | √ | √ | √ | 2 | ||
29 | 00 | √ | √ | √ | √ | √ | 2 | ||
29 | 00 | √ | √ | √ | √ | √ | 1 | ||
29 | 04 | √ | √ | √ | √ | √ | 2 | e | |
29 | 06 | √ | √ | 2 | |||||
29 | 07 | √ | √ | 2 | |||||
29 | 08 | √ | √ | 2 | |||||
29 | 09 | √ | √ | 2 | |||||
29 | 17 | √ | √ | 2 | |||||
29 | 18 | Get Firmware Library Version | |||||||
32 | 01 | √ | √ | √ | √ | √ | 2 | ||
32 | 02 | √ | √ | √ | √ | √ | 2 | ||
2C | 01 | √ | √ | √ | √ | √ | 2 | ||
2C | 02 | √ | √ | √ | √ | √ | 2 | ||
2C | 03 | √ | √ | √ | √ | √ | 2 | ||
2C | 04 | √ | √ | √ | √ | √ | 2 | ||
2C | 05 | √ | √ | √ | √ | √ | 2 | ||
2C | 06 | √ | √ | √ | √ | √ | 2 | ||
2C | 07 | √ | √ | √ | √ | √ | 2 | ||
2C | 08 | √ | √ | √ | √ | √ | 2 | ||
2C | 09 | √ | √ | √ | √ | √ | 2 | ||
2C | 0A | √ | √ | √ | √ | √ | 2 | ||
2C | 0B | √ | √ | √ | √ | √ | 2 | ||
2C | 0C | √ | √ | √ | √ | √ | 2 | ||
2C | 0F | √ | √ | √ | √ | √ | 2 | ||
2C | 12 | √ | 2 | ||||||
2C | 13 | √ | 2 | ||||||
2C | 18 | Contact Power Off | |||||||
2C | 40 | √ | 2 | ||||||
2C | 41 | √ | 2 | ||||||
2C | 42 | √ | 2 | ||||||
2C | 43 | Felica Lite/Lite-S Read/Write Blocks with MAC | √ | 2 | |||||
2C | 50 | √ | √ | √ | √ | √ | 2 | ||
2C | 51 | √ | √ | √ | √ | √ | 2 | ||
2C | 52 | √ | √ | √ | √ | √ | 2 | ||
30 | 01 | √ | √ | √ | √ | √ | 2 | ||
30 | 02 | √ | √ | √ | √ | √ | 2 | ||
60 | 01 | √ | √ | √ | 2 | ||||
60 | 02 | √ | √ | √ | 2 | ||||
60 | 03 | √ | √ | √ | 2 | ||||
60 | 04 | √ | √ | √ | 2 | ||||
60 | 05 | √ | √ | √ | 2 | ||||
60 | 06 | √ | √ | √ | 2 | ||||
60 | 07 | √ | √ | √ | 2 | ||||
60 | 08 | √ | √ | √ | 2 | ||||
60 | 09 | √ | √ | √ | 2 | ||||
60 | 0A | √ | √ | √ | 2 | ||||
60 | 0B | √ | √ | √ | 2 | ||||
60 | 0C | √ | √ | √ | 2 | ||||
60 | 0D | √ | √ | √ | 2 | ||||
60 | 0E | √ | √ | √ | 2 | ||||
60 | 0F | √ | √ | √ | 2 | ||||
60 | 10 | √ | √ | √ | 2 | ||||
60 | 11 | √ | √ | √ | 2 | ||||
60 | 12 | √ | √ | √ | 2 | ||||
60 | 13 | √ | √ | √ | 2 | ||||
60 | 14 | √ | √ | √ | 2 | ||||
60 | 15 | √ | √ | √ | 2 | ||||
60 | 16 | √ | √ | √ | 2 | ||||
61 | 01 | √ | √ | √ | 2 | ||||
61 | 02 | √ | √ | √ | 2 | ||||
61 | 03 | √ | √ | √ | 2 | ||||
62 | 00 | ||||||||
62 | 01 | ||||||||
62 | 02 | ||||||||
62 | 03 | ||||||||
62 | 04 | ||||||||
77 | 81 | 2 | |||||||
80 | 00 | Load Plaintext KPK Component Request | |||||||
80 | 01 | Replace KPK Request | |||||||
81 | 00 | Load Initial DUKPT Key | |||||||
81 | 02 | √ | √ | √ | √ | √ | 2 | ||
81 | 04 | √ | √ | √ | √ | √ | 2 | ||
81 | 0A | √ | √ | √ | √ | √ | 2 | ||
81 | 0B | ||||||||
81 | 40 | ||||||||
83 | 00 | Erase All Keys | |||||||
84 | 03 | √ | √ | √ | √ | √ | 2 | ||
84 | 04 | √ | √ | √ | √ | √ | 2 | ||
84 | 05 | √ | √ | √ | √ | √ | 2 | ||
84 | 06 | √ | √ | √ | √ | √ | 2 | ||
84 | 07 | √ | √ | √ | √ | √ | 2 | ||
84 | 08 | √ | √ | √ | √ | √ | 2 | ||
84 | 09 | √ | √ | √ | √ | √ | 2 | ||
84 | 0A | √ | √ | √ | √ | √ | 2 | ||
84 | 0B | √ | √ | √ | √ | √ | 2 | ||
84 | 0C | √ | √ | √ | √ | √ | 2 | ||
84 | 0D | √ | √ | √ | √ | √ | 2 | ||
84 | 0E | √ | √ | √ | √ | √ | 2 | ||
84 | 0F | √ | √ | √ | √ | √ | 2 | ||
C7 | 2D | √ | √ | √ | √ | √ | 2 | ||
C7 | 2E | √ | √ | √ | √ | √ | 2 | ||
C7 | 2F | √ | √ | √ | √ | √ | 2 | ||
C7 | 30 | √ | √ | √ | √ | √ | 2 | ||
C7 | 32 | √ | √ | √ | √ | √ | 2 | ||
C7 | 33 | √ | √ | √ | √ | √ | 2 | ||
C7 | 36 | √ | √ | √ | √ | √ | 2 | ||
C7 | 37 | √ | √ | √ | √ | √ | 2 | ||
C7 | 38 | √ | 2 | ||||||
C7 | 39 | √ | 2 | ||||||
C7 | 3D | Read Log | |||||||
C7 | 9A | √ | √ | √ | √ | √ | 2 | ||
C7 | 9B | √ | √ | √ | √ | √ | 2 | ||
C7 | A1 | Get PIN Encryption Mode (TDES/AES) | |||||||
D0 | 01 | Get CA Public Key | √ | √ | √ | √ | √ | 2 | |
D0 | 02 | Get CA Public Key Hash | √ | √ | √ | √ | √ | 2 | |
D0 | 03 | Set CA Public Key | √ | √ | √ | √ | √ | 2 | |
D0 | 04 | Delete CA Public Key | √ | √ | √ | √ | √ | 2 | |
D0 | 05 | Delete All CA Public Keys | √ | √ | √ | √ | √ | 2 | |
D0 | 06 | Get All CA Public RIDs | √ | √ | √ | √ | √ | 2 | |
D0 | 07 | √ | √ | √ | √ | √ | 2 | ||
F0 | 00 | √ | √ | √ | √ | √ | 2 | ||
F0 | 01 | √ | √ | √ | √ | √ | 2 | ||
F0 | 02 | √ | √ | √ | √ | √ | 2 | ||
F0 | 0F | √ | √ | √ | √ | √ | 2 | ||
F0 | F2 | LCD Display Line1 (non-block) | |||||||
F0 | F3 | LCD Display Line2 (non-block) | |||||||
F0 | F4 | √ | √ | √ | 2 | a | |||
F0 | F5 | √ | √ | √ | 2 | a | |||
F0 | F6 | √ | n/a | √ | 2 | a | |||
F0 | F7 | √ | n/a | √ | 2 | a | |||
F0 | F9 | √ | n/a | √ | 2 | a | |||
F0 | FA | √ | n/a | √ | 2 | a | |||
F0 | FB | √ | n/a | √ | 2 | a | |||
F0 | FC | √ | n/a | √ | 2 | a | |||
F0 | FD | √ | n/a | √ | 2 | a | |||
F0 | FE | √ | n/a | √ | 2 | a |
a ViVOpay Vendi reader only
c Not in Global Reader Lite (GRL)
d Real Time Clock only
e Only applies to devices with USB
1.1.3. Pass-Through Command Table
All commands in the following table use Protocol 2 formats (see Protocol 2 Formats).
Table 4: Pass-Through Command Table
Command | C’less or C’less + MSR | LCD | Line | US | EMV | Protocol | CMD | SUB CMD |
√ | √ | √ | √ | √ | 2 | 28 | 01 | |
√ | √ | √ | √ | √ | 2 | 0B | 02 | |
√ | √ | √ | √ | √ | 2 | 0B | 01 | |
√ | √ | √ | √ | √ | 2 | 2C | 0B | |
√ | √ | √ | √ | √ | 2 | 2C | 0C | |
√ | √ | √ | √ | √ | 2 | 2C | 03 | |
√ | √ | √ | √ | √ | 2 | 2C | 05 | |
√ | √ | √ | √ | √ | 2 | 2C | 09 | |
√ | √ | √ | √ | √ | 2 | 0A | 02 | |
√ | √ | √ | √ | √ | 2 | 2C | 06 | |
√ | √ | √ | √ | √ | 2 | 2C | 0A | |
√ | √ | √ | √ | √ | 2 | 2C | 07 | |
√ | √ | √ | √ | √ | 2 | 2C | 08 | |
√ | √ | √ | √ | √ | 2 | 2C | 01 | |
√ | √ | √ | √ | √ | 2 | 2C | 04 | |
√ | √ | √ | √ | √ | 2 | 2C | 02 | |
√ | √ | √ | √ | √ | 2 | 2C | 41 | |
√ | √ | √ | √ | √ | 2 | 2C | 42 | |
Felica Lite/Lite-S Read/Write Blocks with MAC | √ | √ | √ | √ | √ | 2 | 2C | 43 |
√ | √ | √ | √ | √ | 2 | 2C | 50 | |
√ | √ | √ | √ | √ | 2 | 2C | 51 | |
√ | √ | √ | √ | √ | 2 | 2C | 52 |
1.1.4. EMV Key Manager Command Tables
The preferred method of accessing the Certificate Authority public keys is to use the following commands in the Protocol 2 format: (see Protocol 2)
Table 5: EMV Key Management – Protocol 2
Command | C’less or C’less + MSR | LCD | Line | US | EMV | Protocol | CMD | SUB CMD | Notes |
Get CA Public Key | √ | √ | √ |
| √ | 2 | D0 | 01 | |
Get CA Public Key Hash | √ | √ | √ |
| √ | 2 | D0 | 02 | |
Set CA Public Key | √ | √ | √ |
| √ | 2 | D0 | 03 | |
Delete CA Public Key | √ | √ | √ |
| √ | 2 | D0 | 04 | |
Delete All CA Public Keys | √ | √ | √ |
| √ | 2 | D0 | 05 | |
Get All CA Public RIDs | √ | √ | √ |
| √ | 2 | D0 | 06 | |
List CA Public Key IDs for RID | √ | √ | √ |
| √ | 2 | D0 | 07 |
1.2. Status Codes
The tables in this section define status codes for Protocol 1 and Protocol 2.
1.2.1. Status Codes for Protocol 1
Table 6: Protocol 1 Status Codes
Status Code | Status |
00h | OK |
01h | Incorrect Frame Tag |
02h | Incorrect Frame Type |
03h | Unknown Frame Type |
04h | Unknown Command |
05h | Unknown Sub-Command |
06h | CRC Error |
07h | Failed |
08h | Timeout |
0Ah | Incorrect Parameter |
0Bh | Command Not Supported |
0Ch | Sub-Command Not Supported |
0Dh | Parameter Not Supported / Status Abort Command |
0Eh | Command not Allowed |
0Fh | Sub-Command Not Allowed |
57h | No payment occurred (VAS transaction) |
1.2.2. Status Codes for Protocol 2
Table 7: Protocol 2 Status Codes
Status Code | Status |
00h | OK |
01h | Incorrect Header Tag |
02h | Unknown Command |
03h | Unknown Sub-Command |
04h | CRC Error in Frame |
05h | Incorrect Parameter |
06h | Parameter Not Supported |
07h | Mal-formatted Data |
08h | Timeout |
0Ah | Failed / NACK |
0Bh | Command not Allowed |
0Ch | Sub-Command not Allowed |
0Dh | Buffer Overflow (Data Length too large for reader buffer) |
0Eh | User Interface Event |
10h | Need clear firmware (apply in boot loader only) |
11h | Communication type not supported, VT-1, burst, etc. |
Need encrypted firmware (apply in boot loader only) | |
12h | Secure interface is not functional or is in an intermediate state. |
13h | Data field is not mod 8 |
14h | Pad 0x80 not found where expected |
15h | Specified key type is invalid |
16h | Could not retrieve key from the SAM (InitSecureComm) |
17h | Hash code problem |
18h | Could not store the key into the SAM (InstallKey) |
19h | Frame is too large |
1Ah | Unit powered up in authentication state but POS must resend the InitSecureComm command |
1Bh | The EEPROM may not be initialized because SecCommInterface does not make sense |
1CH | Problem encoding APDU |
Module-Specific Status Codes[1] | |
20h | Unsupported Index (ILM) SAM Transceiver error – problem communicating with the SAM (Key Mgr) |
21h | Unexpected Sequence Counter in multiple frames for single bitmap (ILM) Length error in data returned from the SAM (Key Mgr) |
22h | Improper bit map (ILM) |
23h | Request Online Authorization |
24h | ViVOCard3 raw data read successful |
25h | Message index not available (ILM) ViVOcomm activate transaction card type (ViVOcomm) |
26h | Version Information Mismatch (ILM) |
27h | Not sending commands in correct index message index (ILM) |
28h | Time out or next expected message not received (ILM) |
29h | ILM languages not available for viewing (ILM) |
2Ah | Other language not supported (ILM) |
31h | Request Online PIN |
41h – 4Fh | Module-specific errors for Key Manager |
50h | Auto-Switch OK |
51h | Auto-Switch failed |
57h | No payment occurred (VAS transaction) |
60h | Data not exist |
61h | Data Full |
62h | Write Flash Error |
63h | Ok and have next command |
70h | Antenna Error Note for Kiosk III: If antenna is disconnected when Activate Transaction(02-01) command is not received, reader will keep beeping until the antenna is connected correctly. If Activate Transaction(02-01) command is received, and during the polling time, antenna is disconnected, reader will waiting to the end of polling time, and return status code 08h(Time Out), then keep beeping until the antenna is connected correctly. Reader will response 70h as status code once Activate Transaction(02-01) command is received when antenna is disconnected. |
80h | Use another card |
81h | Insert or swipe card |
90h | Data encryption Key does not exist |
91h | Data encryption Key KSN exhausted |
1.3. Error Codes
Table 8: Error Codes
Error Code | Description | Reason for Error and Suggested Error Handling |
00h | No Error | None. |
01h | Out of Sequence Command | Reader did not receive commands in the correct order. Correct the Terminal application to send serial commands in the correct sequence. |
02h | Go to Contact Interface | The contactless transaction failed.
If the reader supports a contact interface, advise the user to complete the transaction on the contact interface. Previously, this error code was used if the reader supported another interface (beside the contact interface). Integrators should use error code 04h Go to Other Interface instead. The previous use has been deprecated. |
03h | Transaction Amount is Zero | If the transaction amount is zero and the terminal is “an offline only terminal” then reader needs to terminate the transaction. |
04h | Go To Other Interface | The transaction has failed.
If the reader supports another interface, advise the user to complete the transaction on the other interface. |
05h | Go To Nearby Interface | The transaction has failed. If there is another nearby contact interface, advise the user to complete the transaction on the nearby contact interface. This situation might be a case where there are multiple pay stations, but only one of them has a contact interface. |
06h | Go To MagStripe Interface | The transaction has failed. If the reader has a MagStripe interface, advise the user to complete the transaction using the MagStripe interface. |
08h | Transaction Timeout | The transaction timed out. Restart the transaction. |
20h | Card returned Error Status | Card returned SW1SW2 not equal to 9000 hex. Value of the SW1SW2 bytes from the Card is returned in the Data portion of the Response Frame. Details of what the SW1SW2 codes mean for each RF State are Card dependent and are out of the scope of this document. How the terminal handles this error depends on when the error occurs in the transaction flow. The RF State Code (see section on RF State Codes) indicates the transaction state when the error occurred. Suggested error handling for individual RF State Codes is given below:
RF State Code = PPSE: If RF State Code = SELECT: If RF State Code = GPO: If RF State Code = READ RECORD: If RF State Code = GET DATA (Ticket): If RF State Code = GET DATA (Ticketing Profile): If RF State Code = GET DATA (Balance): If RF State Code = PUT DATA (Ticket): The terminal can retry the transaction or abandon it. If RF State Code = GEN AC: For Credit transactions: The terminal can retry the transaction or abandon it. |
21h | Collision Error | There was more than one contactless card in the reader’s range. |
22h | Amount Over Maximum Limit | The Transaction Amount is greater than Terminal Contactless Transaction Limit (FFF1). |
23h | Request Online Authorization | If the Transaction Amount is greater than the Balance on the card but is less than the Terminal Contactless Transaction Limit (FFF1), the reader sends this error code back to the terminal along with other information needed by the acquirer to format an online authorization request. |
24h | Card Communication Error | A communication error occurred while interacting with the card. An example might be the card was removed from the field. |
25h | Card Blocked | If the card is not supported by the reader according to the value of parameter Application Capability (FFF3) this error code is sent to the terminal. |
26h | Card Expired | This error code is sent to the terminal if the current date of the reader is greater than the expiration date of the card. This status code is only valid for qVSDC cards. |
27h | Unsupported Card | Card presented to the reader is of a type that is not supported by the reader. This could be due to presenting a card with an AID that is not recognized by the reader. |
30h | Card did not respond | Card was removed from the field or there was a Communication Error preventing the card response from reaching the reader. How the terminal handles this error depends on when in the transaction the error occurred. The RF State Code (see section on RF State Codes) indicates the transaction state when the error occurred. Suggested error handling for each RF State Code is given below:
RF State Code = PPSE: The terminal can retry the transaction or abandon it. If RF State Code = SELECT: The terminal can retry the transaction or abandon it. If RF State Code = GPO: The terminal can retry the transaction or abandon it. If RF State Code = READ RECORD: The terminal can retry the transaction or abandon it. If RF State Code = GEN AC: For Credit transactions: The terminal can retry the transaction or abandon it. If RF State Code = GET DATA (Ticket): If RF State Code = GET DATA (Ticketing Profile): If RF State Code = GET DATA (Balance): If RF State Code = PUT DATA (Ticket): |
40h | Unknown Data Element Error | The data element is unknown. |
41h | Data Element Missing | A mandatory/required data element was missing from the card. |
42h | Card Generated AAC | The card declined the transaction by sending an AAC instead of a TC. |
43h | Card Generated ARQC | This error code would be returned if the card generated an ARQC and the terminal/reader was configured as “Offline Only”; therefore the card was DECLINED. |
44h | SDA/DDA Failed (Not Supported by Card) | Card did not indicate support for the correct authentication method and date authentication failed. For Visa, when DDA is required, the card must indicate support for DDA in AIP. If this support is not indicated then the transaction fails and this error code is returned. |
50h | SDA/DDA/CDDA Failed (CA Public Key) | Data Authentication failed due to missing CA Public Key. Retrying the transaction does not correct the error until the missing CA Public Key problem is corrected via Key Management commands. |
51h | SDA/DDA/CDDA Failed (Issuer Public Key) | Data Authentication failed due to a problem in recovering the Issuer Public Key from the card data. Data on the card may be incorrect or the reader has the wrong CA Public Key. |
52h | SDA Failed (SSAD) | Data Authentication failed during SSAD. Retrying the transaction does not correct the error. |
53h | DDA/CDDA Failed (ICC Public Key) | Data Authentication failed during attempted recovery of ICC Public Key. Retrying the transaction does not correct the error. |
54h | DDA/CDDA Failed (Dynamic Signature Verification) | Data Authentication failed during Dynamic Signature Verification. Retrying the transaction does not correct the error: At this point, the amount has been deducted from the Card Balance. |
55h | Processing Restrictions Failed | The Processing Restrictions step as defined in EMV Specifications failed. This could be due to incorrectly set configuration. Retrying the transaction does not correct the error until the EMV configuration is corrected. |
56h | Terminal Risk Management (TRM) Failed | The Terminal Risk Management step as defined in EMV Specifications failed. This could be due to incorrectly set configuration. Retrying the transaction does not correct the error until the EMV configuration is corrected. |
57h | Cardholder Verification Failed | The Cardholder Verification step as defined in EMV Specifications failed. This could be due to incorrectly set configuration. Retrying the transaction does not correct the error until the EMV configuration is corrected. |
58h | Terminal Action Analysis (TAA) Failed | The Terminal Action Analysis step as defined in EMV Specifications failed. This could be due to incorrectly set configuration. Retrying the transaction does not correct the error until the EMV configuration is corrected. |
59h | Card Expired (Interac) | This error code is sent to the terminal if the current date of the reader is greater than the expiration date of the card. This status code is only valid for qVSDC cards. (Terminated) |
5Ah | Cardholder Verification Failed (Interac) | The Cardholder Verification step as defined in EMV Specifications failed. This could be due to incorrectly set configuration. Retrying the transaction does not correct the error until the EMV configuration is corrected. (Terminated) |
61h | SD Memory Error | This error is reported only when trying to retrieve Transaction Logs. This error is never reported during a transaction. |
62h | Generic Error | This is a generic / general error that is reported when a more specific reason for the error is not known. |
63h | Card returned Data Element Error | Returned card data element is invalid. |
73h | Torn Transaction Log Error | An error occurred while attempting to clean the torn transaction log. This might occur if the reader could not read the time and date from the real time clock. |
80h | No Merchants have been configured | This error usually occurred while MerchantID is empty. |
81h | TLV Parse Failure | This error usually occurred while fail to TLV parsing card response data. |
82h | Merchant Data Error | This error usually occurred while no merchant data returned from card. |
83h | System Memory Error | This error usually occurred while fail to read or write system memory. |
84h | Application Skip Error | This error usually occurred while configuration isn’t consistent on whether or not to skip payment application |
85h | Application Version Error | This error usually occurred while application version number is incorrect. |
88h | LTPK Error | This error code indicates the LTPK (long term private key) hasn’t been loaded. |
If an error occurs during a transaction and the terminal determines that the reader must perform exception processing, then the terminal must retry the transaction until the transaction has been completed successfully or the terminal decides to abort it. The retries must be continued even if successive transactions fail with conditions that do not require exception processing. This must be done to allow the reader to complete exception processing (even if there are failures during exception processing).
Under certain conditions, such as when a customer walks away or there is a problem with the card, the terminal may want to abort the retries even if the reader has not been able to complete exception processing. How and when the terminal stops retrying is out of the scope of this document.
1.4. RF State Codes
For some Error Codes, the RF State Code indicates the exact Reader-Card command that failed. This helps determine the exact place where the failure occurred.
Table 9: RF State Codes
State Code | RF State | Description |
00h | None | RF State Code not available |
01h | PPSE | Error occurred during PPSE command |
02h | SELECT | Error occurred during SELECT command |
03h | GPO | Error occurred during GET PROCESSING OPTIONS command |
04h | READ RECORD | Error occurred during READ RECORD command |
05h | GEN AC | Error occurred during GEN AC command |
06h | CCC | Error occurred during CCC command |
07h | IA | Error occurred during IA command |
08h | SDA | Error occurred during SDA processing |
09h | DDA | Error occurred during DDA processing |
0ah | CDA | Error occurred during CDA processing |
0bh | TAA | Error occurred during TAA processing |
0ch | UPDATE RECORD | Error occurred during UPDATE RECORD command |
10h | GET DATA (Ticket) | Error occurred during GET DATA command to retrieve the Ticket |
11h | GET DATA (Ticketing Prof) | Error occurred during GET DATA command to retrieve the Ticketing Profile |
12h | GET DATA (Balance) | Error occurred during GET DATA command to retrieve the Balance |
13h | GET DATA (All) | Error occurred during GET DATA command to retrieve all data |
20h | PUT DATA (Ticket) | Error occurred during PUT DATA command to retrieve the Ticket |
1.5. EMV Result Codes (Tag DFEE25)
For contact EMV transactions, a two-byte result code may be returned in DFEE25. Check the contents of tag DFEE25, when it occurs, and interpret the results as follows.
NOTE: The result code is always two bytes long. The bottom two bits of the first byte are flags. If the zero bit is set, it means there was "advice." If the 1 bit was set, it means there was a "reversal." For example, 0203 means there was a reversal (02) and the result was 03 (declined).
Table 10: EMV Result Codes
Message | Code |
EMV_RESULT_CODE_APPROVED_OFFLINE | 0x0000 |
EMV_RESULT_CODE_DECLINED_OFFLINE | 0x0001 |
EMV_RESULT_CODE_APPROVED | 0x0002 |
EMV_RESULT_CODE_DECLINED | 0x0003 |
EMV_RESULT_CODE_GO_ONLINE | 0x0004 |
EMV_RESULT_CODE_CALL_YOUR_BANK | 0x0005 |
EMV_RESULT_CODE_NOT_ACCEPTED | 0x0006 |
EMV_RESULT_CODE_FALLBACK_TO_MSR | 0x0007 |
EMV_RESULT_CODE_TIMEOUT | 0x0008 |
EMV_RESULT_CODE_GO_ONLINE_CTLS | 0x0009* |
EMV_RESULT_CODE_AUTHENTICATE_TRANSACTION | 0x0010 |
EMV_RESULT_CODE_TRANSACTION_CANCELED | 0x0012* |
EMV_RESULT_CODE_SWIPE_NON_ICC | 0x0011* |
EMV_RESULT_CODE_CTLS_TWO_CARDS | 0x007A* |
EMV_RESULT_CODE_CTLS_TERMINATE | 0x007E* |
EMV_RESULT_CODE_CTLS_TERMINATE_TRY_ANOTHER | 0x007D* |
EMV_RESULT_CODE_UNABLE_TO_REACH_HOST | 0x00FF* |
EMV_RESULT_CODE_FILE_ARG_INVALID | 0x1001 |
EMV_RESULT_CODE_FILE_OPEN_FAILED | 0x1002 |
EMV_RESULT_CODE_FILE_OPERATION_FAILED | 0x1003 |
EMV_RESULT_CODE_MEMORY_NOT_ENOUGH | 0x2001 |
EMV_RESULT_CODE_SMARTCARD_OK | 0x3001 |
EMV_RESULT_CODE_SMARTCARD_FAIL | 0x3002 |
EMV_RESULT_CODE_SMARTCARD_INIT_FAILED | 0x3003 |
EMV_RESULT_CODE_FALLBACK_SITUATION | 0x3004 |
EMV_RESULT_CODE_SMARTCARD_ABSENT | 0x3005 |
EMV_RESULT_CODE_SMARTCARD_TIMEOUT | 0x3006 |
EMV_RESULT_CODE_MSR_CARD_ERROR | 0x3007 |
EMV_RESULT_CODE_TIMEOUT_FOR_WAITING_ICC_INSERT_OR_MSR_SWIPE_FALLBACK | 0x3013* |
EMV_RESULT_CODE_PARSING_TAGS_FAILED | 0x5001 |
EMV_RESULT_CODE_CARD_DATA_ELEMENT_DUPLICATE | 0x5002 |
EMV_RESULT_CODE_DATA_FORMAT_INCORRECT | 0x5003 |
EMV_RESULT_CODE_APP_NO_TERM | 0x5004 |
EMV_RESULT_CODE_APP_NO_MATCHING | 0x5005 |
EMV_RESULT_CODE_MANDATORY_OBJECT_MISSING | 0x5006 |
EMV_RESULT_CODE_APP_SELECTION_RETRY | 0x5007 |
EMV_RESULT_CODE_AMOUNT_ERROR_GET | 0x5008 |
EMV_RESULT_CODE_CARD_REJECTED | 0x5009 |
EMV_RESULT_CODE_AIP_NOT_RECEIVED | 0x5010 |
EMV_RESULT_CODE_AFL_NOT_RECEIVED | 0x5011 |
EMV_RESULT_CODE_AFL_LEN_OUT_OF_RANGE | 0x5012 |
EMV_RESULT_CODE_SFI_OUT_OF_RANGE | 0x5013 |
EMV_RESULT_CODE_AFL_INCORRECT | 0x5014 |
EMV_RESULT_CODE_EXP_DATE_INCORRECT | 0x5015 |
EMV_RESULT_CODE_EFF_DATE_INCORRECT | 0x5016 |
EMV_RESULT_CODE_ISS_COD_TBL_OUT_OF_RANGE | 0x5017 |
EMV_RESULT_CODE_CRYPTOGRAM_TYPE_INCORRECT | 0x5018 |
EMV_RESULT_CODE_PSE_BY_CARD_NOT_SUPPORTED | 0x5019 |
EMV_RESULT_CODE_USER_LANGUAGE_SELECTED | 0x5020 |
EMV_RESULT_CODE_SERVICE_NOT_ALLOWED | 0x5021 |
EMV_RESULT_CODE_NO_TAG_FOUND | 0x5022 |
EMV_RESULT_CODE_CARD_BLOCKED | 0x5023 |
EMV_RESULT_CODE_LEN_INCORRECT | 0x5024 |
EMV_RESULT_CODE_CARD_COM_ERROR | 0x5025 |
EMV_RESULT_CODE_TSC_NOT_INCREASED | 0x5026 |
EMV_RESULT_CODE_HASH_INCORRECT | 0x5027 |
EMV_RESULT_CODE_ARC_NOT_PRESENCED | 0x5028 |
EMV_RESULT_CODE_ARC_INVALID | 0x5029 |
EMV_RESULT_CODE_COMM_NO_ONLINE | 0x5030 |
EMV_RESULT_CODE_TRAN_TYPE_INCORRECT | 0x5031 |
EMV_RESULT_CODE_APP_NO_SUPPORT | 0x5032 |
EMV_RESULT_CODE_APP_NOT_SELECT | 0x5033 |
EMV_RESULT_CODE_LANG_NOT_SELECT | 0x5034 |
EMV_RESULT_CODE_TERM_DATA_NOT_PRESENCED | 0x5035 |
EMV_RESULT_CODE_BLOCK_CARD_AID | 0x5036 |
EMV_RESULT_CODE_CVM_TYPE_UNKNOWN | 0x6001 |
EMV_RESULT_CODE_CVM_AIP_NOT_SUPPORTED | 0x6002 |
EMV_RESULT_CODE_CVM_TAG_8E_MISSING | 0x6003 |
EMV_RESULT_CODE_CVM_TAG_8E_FORMAT_ERROR | 0x6004 |
EMV_RESULT_CODE_CVM_CODE_IS_NOT_SUPPORTED | 0x6005 |
EMV_RESULT_CODE_CVM_COND_CODE_IS_NOT_SUPPORTED | 0x6006 |
EMV_RESULT_CODE_CVM_NO_MORE | 0x6007 |
EMV_RESULT_CODE_PIN_BYPASSED_BEFORE | 0x6008 |
EMV_RESULT_CODE_PK_BUFFER_SIZE_TOO_BIG | 0x7001 |
EMV_RESULT_CODE_PK_FILE_WRITE_ERROR | 0x7002 |
EMV_RESULT_CODE_PK_HASH_ERROR | 0x7003 |
EMV_RESULT_CODE_CARD_HOLDER_CONFIRMATION_NOT_PRESENCED | 0x8002 |
EMV_RESULT_CODE_ONLINE_PIN_GET | 0x8003 |
EMV_RESULT_CODE_UNKNOWN | 0xFFFF* |
* This EMV result code is not supported by VP3300.
[1] Status codes in this range are “module-specific” so that their values can be re-used by different modules. The meaning of these codes may depend on which command is being issued. An exception is 23h, which is used generally.