Atlassian uses cookies to improve your browsing experience, perform analytics and research, and conduct advertising. Accept all cookies to indicate that you agree to our use of cookies on your device. Atlassian cookies and tracking notice, (opens new window)

Results will update as you type.

How to check (and set) if my SecuRED is in USB/HID or USB/KB and how to check the security level?
How to check and set the date and time (RTC real time clock) on a NEO device (UniPay 1.5) in uDemo
How to Check Key Status and Key Info for NEO or NEO 2 Products
How to check MiniSmart II Key status.
How to check whether the VP5300 reader and L100 pin-pad are paired or not?
How to clone the configuration setting from a known working MiniMag II or SecureMag reader to a new reader?
How to Configure VP3300\VP8300 for Quick Chip KB (QCKB) emulation over HID?
How to connect VP3300 BT to iPhone/iPad using SDK demo app
How-to: Contactless - Configurable AIDs and Groups. Delete / Disable AIDs (NEO2)
How to control the Augusta output speed in QC USB KB mode?
How to control the pre-PAN/Post-Pan with the mag stripe mask data returned by the VP5300 via the 02-40 command?
How to control which tracks are output on SecureMag, SecureHead, MiniMag, Omni?
How to decrypt a PIN block (tag 99) using uDemo?
How to delete/disable AIDs on contactless readers
How to disable (lock) the Admin key on the SecureKey and SREDKey?
How to disable the power saving of the USB ports on my PC?
How to display a message on LCD display of Vendi reader?
How to Enable Escape Command for TM3 USB CCID driver
How to Enable RRP on NEO 2 Projects
How to Enable TransArmor on a Device
How to enable USB-HID mode on SREDKey
How to fix "Start EMV failed Error Code: 0xF212: Transaction Type Error" on Augusta USB-HID mode
How to fix the "Fail to Open" PS2 KB MSR with the latest JPOS MSR driver 80128802-002 on a Windows Embedded POSReady 7?(32bit)
How to Get and Set the Friendly Name for a VP3300BT
How to get product update notifications. How to get notified when new firmware is release.
How to get the KSN or KSI from an Augusta
How to get the updated USB serial driver for the WCR3227-xxxU series?
How to get the USB/HID TransArmor SecureMag (model: IDRE-335133B-RP) recognized correctly by Windows 8/10?
How to handle Issuer Scripts un an EMV transaction?
How to Load an EMV CAPK from a File Using uDemo
How to load (with SDK) a standard SREDKEY (IDSK-534883AEB) to Shift 4 SREDKEY (IDSK-534883AEB-S1)?
How to parse the USB/KB encrypted data correctly with Parsomatic?
How to perform a Remote Key Injection RKI
How to poll the Spectrum Pro for information?
How to program a 2D Scan (IDBA-6641LRB) to append a Tab instead of the default Enter at the end of the output?
How to program the SREDKey with a F7 as prefix and F8 as suffix?
How to read/write Mifare Plus card?
How to read/write MiFare standard( type 04) card
How to reconnect a disconnected VP3300BT?
How to re-initialize the MSR key after the VP5300 firmware upgrading?
How to reset an Augusta reader to default settings
How to reset a reader to default settings in MagSwipe Configuration Utility
How to reset default settings on MiniMag II or SecureMag
How to Retrieve the KSN from a MiniSmart II
How to save Contactless AIDs (NEO and NEO2 devices)
How to Send Configure file-Brief version?
How to Set and Update the Device Clock
How to set Device Date and Time on NEO II readers.
How to Set Kernel Config and How to Save Terminal Data using uDemo
How to set the Polling Interval on a MiniMag II?
How to switch Augusta (HID) to Augusta KB in uDemo
How to switch Augusta KB to Augusta (HID) in uDemo
How to test/demo an SREDKey?
How to test LEDs and Buzzer on a contactless (Vivo) reader?
How to troubleshoot a CDA failure
How to Turn Off the Beeper on an Augusta or Augusta S
How to update the firmware and kernel on a VP6300
How to update the Firmware for a Kiosk III?
How to update the firmware on an SREDKey?
How to update the firmware on a VP5300? (and maybe an L100 PIN pad)
How to update the out of date .dll files in the Augusta demo (or other product specific Demo)?
How to use 03-00 / 03-40 commands and parse the results
How to use Autoconfig feature in the UniMag Demo?
How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
How to use the MagSwipe Configuration software to send a manual command to the reader?
How to use the SecureMag Demo to collect the required data for troubleshooting?
How to use VC Demo to test an USB/CCID Hybrid Insert reader?
IDRE-335133BR (Transarmor SecureMag) Not Working on Windows 10
ID TECH’s Gen 1 vs Gen 2 Contact Kernels
I got the AC after the Authenticate Transaction. Is it safe to assume that the value returned in the 9F26 tag is the ARQC?
Information for MINDBODY users
Inquiring about devices - Autoconfig Issue
Integrating Applications for Multiple ID TECH SDKs
I sometimes see evidence of corruption in the returned card data...How can I fix this?
Is There a Way to Remove All Groups, AIDs, CAPKs in a NEO Product (e.g., KIOSK III)?
Mifare access example
MM2 USB/HID Rawinput Support
Mobile Reader keyboard emulation
My iMag Pro II stopped working what should I do?
My MiniSmart II does not appear in the Windows Device Manager. What can I do?
My SREDKey Displays "Key Not Injected." How Can I Fix This?

draw.io Diagrams

You‘re viewing this with anonymous access, so some content might be blocked.

/

How to reset an Augusta reader to default settings

How to reset an Augusta reader to default settings

Owned by IT-ADMIN G (Deactivated)

Jan 02, 2020

(click to enlarge)

, multiple selections available, Use left or right arrow keys to navigate selected items

{"serverDuration": 77, "requestCorrelationId": "5ab537dc99e64fac80b5a6800868e13f"}