Spaces
Apps
Templates
Create
Knowledge Base
All content
Space settings
Content
Results will update as you type.
Products - Home
Products - Retired
Tools - Home
Areas of Knowledge - Home
How-to articles
•
Developing for EMV, Part III
•
-FAQ: EMV transaction trouble shooting
•
-FAQ: Firmware
FAQ - iMag Pro II
•
What is the lowest version of iOS that the device/SDKÂ will support?
•
-FAQ: QuickChip Keyboard (QCKB) - Implementation & Integration
•
FAQ - Transarmor for ID TECH products
•
-FAQ: VP3300 USB
•
How does an ID TECH encrypted card reader identify a card as a "financial card"?
•
How Does a VP3300 BT Connect to Apps?
•
How does one split / combine cryptographic keys?
•
How do I connect to a VP3300BT with an iOS device (Apple)?
•
How do I enable RRP on NEO II projects.
•
How do I set/check the Keyboard Polling Interval for an SREDKey?
•
How Do I Set the Keyboard Polling Interval on a SREDKey/SecureKey?
How Do I Set the Whitelist on VP3300 and Augusta Readers?
•
How do I slow down/fix the output of the reader using the Set Character Delay command/feature?
•
How do I update the firmware on a Spectrum Pro?
•
How do I update the firmware on the Augusta/MiniSmart II?
•
How do I verify that my Spectrum Pro is injected with a key and is encrypting MSR and EMV data?
•
How Do I Verify the Key in a MiniSmart II Reader?
•
How long do I need to wait before next swipe (SecureMag)?
•
How to arm reader for any card presentation (swipe, dip, tap)
•
How to capture / trace USB communications with an ID TECH device using BusHound?
•
How to Change the CVM Result from "No CVM Performed" to "Online PIN"
•
How to change the masked data presentation on a VP5300 (or other NEO device)? pre-PAN, post-PAN and mask character
•
How to change USB-KB mode data to look the same as USB-HID data?
•
How to check (and set) if my SecuRED is in USB/HID or USB/KB and how to check the security level?
•
How to check and set the date and time (RTC real time clock) on a NEO device (UniPay 1.5) in uDemo
•
How to Check Key Status and Key Info for NEO or NEO 2 Products
•
How to check MiniSmart II Key status.
•
How to check whether the VP5300 reader and L100 pin-pad are paired or not?
•
How to clone the configuration setting from a known working MiniMag II or SecureMag reader to a new reader?
•
How to Configure VP3300\VP8300 for Quick Chip KB (QCKB) emulation over HID?
•
How to connect VP3300 BT to iPhone/iPad using SDK demo app
•
How-to: Contactless - Configurable AIDs and Groups. Delete / Disable AIDs (NEO2)
•
How to control the Augusta output speed in QC USB KB mode?
•
How to control the pre-PAN/Post-Pan with the mag stripe mask data returned by the VP5300 via the 02-40 command?
•
How to control which tracks are output on SecureMag, SecureHead, MiniMag, Omni?
•
How to decrypt a PIN block (tag 99) using uDemo?
•
How to delete/disable AIDs on contactless readers
•
How to disable (lock) the Admin key on the SecureKey and SREDKey?
•
How to disable the power saving of the USB ports on my PC?
•
How to display a message on LCD display of Vendi reader?
•
How to Enable Escape Command for TM3 USB CCID driver
•
How to Enable RRP on NEO 2 Projects
•
How to Enable TransArmor on a Device
•
How to enable USB-HID mode on SREDKey
•
How to fix "Start EMV failed Error Code: 0xF212: Transaction Type Error" on Augusta USB-HID mode
•
How to fix the "Fail to Open" PS2 KB MSR with the latest JPOS MSR driver 80128802-002 on a Windows Embedded POSReady 7?(32bit)
•
How to Get and Set the Friendly Name for a VP3300BT
•
How to get product update notifications. How to get notified when new firmware is release.
•
How to get the KSN or KSI from an Augusta
•
How to get the updated USB serial driver for the WCR3227-xxxU series?
•
How to get the USB/HID TransArmor SecureMag (model: IDRE-335133B-RP) recognized correctly by Windows 8/10?
•
How to handle Issuer Scripts un an EMV transaction?
•
How to Load an EMV CAPK from a File Using uDemo
•
How to load (with SDK) a standard SREDKEY (IDSK-534883AEB) to Shift 4 SREDKEY (IDSK-534883AEB-S1)?
•
How to parse the USB/KB encrypted data correctly with Parsomatic?
•
How to perform a Remote Key Injection RKI
•
How to poll the Spectrum Pro for information?
•
How to program a 2D Scan (IDBA-6641LRB) to append a Tab instead of the default Enter at the end of the output?
•
How to program the SREDKey with a F7 as prefix and F8 as suffix?
•
How to read/write Mifare Plus card?
•
How to read/write MiFare standard( type 04) card
•
How to reconnect a disconnected VP3300BT?
•
How to re-initialize the MSR key after the VP5300 firmware upgrading?
•
How to reset an Augusta reader to default settings
•
How to reset a reader to default settings in MagSwipe Configuration Utility
•
How to reset default settings on MiniMag II or SecureMag
•
How to Retrieve the KSN from a MiniSmart II
•
How to save Contactless AIDs (NEO and NEO2 devices)
•
How to Send Configure file-Brief version?
•
How to Set and Update the Device Clock
•
How to set Device Date and Time on NEO II readers.
•
How to Set Kernel Config and How to Save Terminal Data using uDemo
•
How to set the Polling Interval on a MiniMag II?
•
How to switch Augusta (HID) to Augusta KB in uDemo
•
How to switch Augusta KB to Augusta (HID) in uDemo
•
How to test/demo an SREDKey?
•
How to test LEDs and Buzzer on a contactless (Vivo) reader?
•
How to troubleshoot a CDA failure
•
How to Turn Off the Beeper on an Augusta or Augusta S
•
How to update the firmware and kernel on a VP6300
•
How to update the Firmware for a Kiosk III?
•
How to update the firmware on an SREDKey?
•
How to update the firmware on a VP5300? (and maybe an L100 PIN pad)
•
How to update the out of date .dll files in the Augusta demo (or other product specific Demo)?
•
How to use 03-00 / 03-40 commands and parse the results
•
How to use Autoconfig feature in the UniMag Demo?
•
How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
•
How to use the MagSwipe Configuration software to send a manual command to the reader?
•
How to use the SecureMag Demo to collect the required data for troubleshooting?
•
How to use VC Demo to test an USB/CCID Hybrid Insert reader?
•
IDRE-335133BR (Transarmor SecureMag) Not Working on Windows 10
•
ID TECH’s Gen 1 vs Gen 2 Contact Kernels
•
I got the AC after the Authenticate Transaction. Is it safe to assume that the value returned in the 9F26 tag is the ARQC?
•
Information for MINDBODY users
•
Inquiring about devices - Autoconfig Issue
•
Integrating Applications for Multiple ID TECH SDKs
•
I sometimes see evidence of corruption in the returned card data...How can I fix this?
•
Is There a Way to Remove All Groups, AIDs, CAPKs in a NEO Product (e.g., KIOSK III)?
•
Mifare access example
•
MM2 USB/HID Rawinput Support
•
Mobile Reader keyboard emulation
•
My iMag Pro II stopped working what should I do?
•
My MiniSmart II does not appear in the Windows Device Manager. What can I do?
•
My SREDKey Displays "Key Not Injected." How Can I Fix This?
•
My SREDKey or SecureKey displays "Key Not Injected" when I tried to manually enter the card number and swipe a card . How can I fix this?
•
My SREDKey/SecureKey Screen Displays "Activating..."; What Should I Do?
•
My VP3300USB is stuck in USB KB mode, how do I get it back to the USB/HID mode?
•
My VP3600 prompts for "press key seq". What should I do?
•
NEO 1.2 - Home and FAQ
•
NEO 2 - Home and FAQ
•
NEO IDG Quick Reference (Rev. 151)
•
NGA Command_Response Protocol
•
NGA, MiniSmart II, How to increase the Idle Waiting Time to 4s
•
Pairing an VP5300 or VP5300M with an L80 and Configure it for an EMV Transaction Test
•
Parsomatic. How to parse TLVs? How to parse transaction data (EMV, MSR or MSD)?
•
PCI DSS - 13 Guidelines
•
Performing a Contact EMV Transaction Test with the VP5300
•
Performing an Offline PIN Transaction Without a PEK on the VP3600
•
Product Integration Topic - Augusta QuickChip KeyBoard fallback behavior
•
Proving NFC Peer-to-Peer messaging on a KioskIII (ISO 18092)
•
Pulling MSR Data with an Augusta Working in HID Buffer Mode
•
Q & A related to the salt keys injected into the products such as NEO II, KIOSK IV and KIOSK V (SRED and Non-SRED version units)
•
Requesting an RMA Number to Return Units for Repair
•
RKI (remote key injection) Errors:
•
SecureKey M130 Setting the Admin Level
•
Service Code and L2 common Kernel
•
SmartTap - Configuration command example
•
Spectrum Pro Chome Demo - Instructions
Show more below
Apps
draw.io Diagrams
Knowledge Base
/
How-to articles
/
How to get product update notifications. How to get notified when new firmware is release.
Summarize
How to get product update notifications. How to get notified when new firmware is release.
IT-ADMIN G (Deactivated)
Owned by
IT-ADMIN G (Deactivated)
Last updated:
May 14, 2020
1 min read
Loading data...
You you opt-in for product update notification on our website.Â
Product Updates