What do the LEDs and beeping mean on a PIN Pad? - Knowledge Base - Confluence

Knowledge Base

All content
Space settings

Results will update as you type.

•
Does the UniMag SDK have 64-bit support?
•
How do I enable encryption for a NEO device?
•
FAQ: ViVOconfig
•
How do I know if ODA is performed or not?
•
How Can I Tell if Encryption is Enabled for a VP3300?
•
During a contact EMV transaction, when are the ARQC, AAC, AC, and their corresponding CDOL1 generated?
•
FAQ: 2D Scan
•
FAQ: Augusta Quick Chip Keyboard (QCKB)
•
How Do I Pair My Spectrum Pro and L100?
•
FAQ: General Support
•
How to decrypt transaction data using test key and KSN?
•
FAQ - Key Injection
•
Cryptogram and EMV Transaction Flow
•
Do I need to load CAPKs for a device deployed in the US (online only market)?
•
How Do I Prepare My Contact/Contactless EMV Reader for EMV Transactions?
•
Bit and Byte Numbering
•
How to get RS232 interface SpectrumIII hybrid insert reader out of the PCSC mode?
•
How to unblock zip files in Windows 10
•
How can I gain an in-depth understanding of contact and contactless EMV technologies?
•
FAQ - How to configure a barcode scanner to give a time stamp.
•
How to retrieve a CVM (Card Verification Method) list?
•
How to disable Contactless Magstripe transactions on the reader?
•
How Do I Check if a VP5300 Reader and L-100 PINPad are Paired?
•
How can I check if my mobile device is compatible with an audio jack mobile reader?
•
How to test/demo a MiniSmart II using the uDemo?
•
How to check the extended firmware version for MiniSmart II?
•
How to use the Selectable Kernels feature on NEO 2 Readers (VP5300) with an example?
•
Contact EMV Transaction, Phase 3 of 3: Complete Transaction
•
How can I add an "Enter" or a carriage return to the end output of an SREDKey 2, SREDKye, or a SecureKey?
•
How Can I Extend the Wake Time of My VP3300 BT?
•
FAQ: SmartPIN L100
•
How do I Check and Activate Encryption on the Augusta?
•
How Can I Check the KSI for a VP3300?
•
How to turn on/off the beeping on VP3300 when the card is not removed in the dip slot?
•
How do I configure the ValueScan II bar code scanner to work with CurvesOS?
•
How to re-configure the SecureMag from the USB HID to the USB KB mode or vice versa?
•
How to check the battery level of the audio or BlueTooth version VP3300 reader?
•
How do I check the extended firmware version for an Augusta(S) reader?
•
How Do I Find the VID/PID (Vendor ID/Product ID) for my USB-connected reader?
•
PIN Block format ISO 9564 Format 0
•
My VP3600 displays "Need Client Key". What does it mean?
•
How to set the Spectrum Pro's Terminal Settings to 3C?
•
Instructions to set the audio configuration automatically
•
How to retrieve the CVC3 from Track2 contactless Mastercard transaction?
•
How to set Augusta Encryption Key Variant to Data or PIN Variant?
•
How do I configure the prefix, suffix, postamble, preamble, and start/end sentinels to an SecureMag, SecureHead (Secure line of readers) Reader?
•
How to output MSR track data without carriage returns (print all tracks on one-line)?
•
MagSwipe Configuration Utility - How to configure card reader with a configure file provided?
•
How to update the bootloader, firmware and kernel files of the VP5300?
•
I have an encrypting reader. How can I set it to leave gift cards unencrypted?
•
How to retrieve the entire configuration setting string from a SecuRED reader?
•
How do I check my encryption Status for a NEO device?
•
How Do I Read DESFire Cards?
•
How Do I Reset a PiP to Delete All Merchant IDs?
•
Is there some specific tracking requirements for a SRED certified device?
•
UniMag Demo walkthrough (Google Play app)
•
UniMag Utility Autoconfig Walkthrough for Android
•
Universal Library for Visual Studio - Home
•
Updating a SREDKey 2 to Bootloader v1.15 and FW v1.01.008.0392
•
Updating Device Security Certificates
•
Updating the Firmware on a VP3300USB or VP8300
•
Updating the VP3300 and VP8300 Kernel from 1.01 to 1.10
•
Updating VP3300 Readers to FW v1.10 with the VP3300 Firmware Update App
•
Using the MagSwipe Configuration Utility to Save or Load a Reader's Settings to or from a File
•
VP3300 Battery Stats
•
VP3300 Transition to New NFC Kernels
•
VP3600 Firmware: How to check the version and update
•
VP5300 and L100 - FAQ and Notes
•
VP5300 Demo Integration - What comes in the Demo kit?
•
VP5300 with L100, using the Universal SDK
•
VP6300 or NEO2 device: How to update the firmware
•
What applications exist that work with the iMag Pro II?
•
What are all the possible EMV "result codes"?
•
What are the "default tags" returned by uDemo? (Start transaction, Authenticate transaction, Complete transaction)
•
What are the "Mercury Settings"?
•
What are the 'PAN Entry Modes' of tag 9F39?
•
What are the steps to update L100 firmware?
•
What contactless terminal configuration is typical for VISA online only US based terminal?
•
What does it mean if I get FF-EE-1F when I tap a contactless card?
•
What does TVR mean?
•
What do the LEDs and beeping mean on a PIN Pad?
•
What Information Helps to Efficiently Troubleshoot a SREDKey Reader?
•
What Information Should I Provide when Requesting Technical Support?
•
What is an ATR?
•
What is Apple's MFI Program? Do I Need to Register My Application with Your Product Plan?
•
What is a TLV?
•
What is EMV Level 3 Certification?
•
What is "Express Transit"?
•
What is PCI?
•
What Is SRED Compliance?
•
What is the difference between Global Configuration TLVs and Group Configuration TLVs? Is there a priority between them?
•
What is the PCI DSS?
•
What is the pin-out for 220-2463-00 (VP8XXX Standard Serial)?
•
What is the pinout of the serial interface cable of your card reader (e.g. WCR3227-xxx)?
•
What products use NGA key injection protocol?
•
What proprietary tags has ID Tech defined?
•
What's the difference between Blue Tooth and Blue Tooth LE?
•
What Terminal Configuration should I use for a payment system in Japan?
•
What torque is recommended to mount readers that have M3 and M3.5 inserts for mounting screw?
•
What triggers the VP3300 reader change between the 3 different power modes?
•
What would happen if the reader was commanded to Enter Low Power Mode while a card is already partially inserted?
•
What would happen if the VP5300 reader is commanded to Enter Low Power Mode while a card is already fully inserted?
•
When a transaction pauses to allow the user to make a “language selection” (or other menu selection), what is the command to use when sending the line number (the selection) back to the device?
•
When the VP5300 is in Sleep mode, and an ICC is inserted, what will happen?
•
Where Can I Get Test Cards?
•
Where is the serial number and a Shuttle mobile reader?
Which Terminal Settings Am I Allowed to Change?
•
White Papers
•
Why aren't tags 57 and 5A returned with my EMV transaction?
•
Why “Can you sell me a PCI DSS Certified Reader?” is the wrong question?
•
Why Do ID TECH Devices Not Support Firmware Updates over Bluetooth?
•
Why don't I see 5F24 (Application Expiration Date) in the reader's response during EMV transaction?
•
Why is my VP3300 not Reading the Inserted Chip Card?
•
Why is Tag 8A Giving a Z3 Response Code?
•
Will the iMag Pro II work with an iPad Pro when connected via a lightning to USB-C converter?
•
With the MiniSmart II firmware upgraded to 2.00.034, I'm not getting the expected ACK when sending the Authenticate command(72460502). How do I correct this?
•
With VP5300, how do I know the card is inserted or not after the Transaction started?
•
WorldPay Integration - Home
•
WorldNet Integration - Home
•
FAQ - Payment Card Industry (PCI)
•
Setting Configuration Parameters and Values (ITP Protocol)
•
How to pair VP5300 reader with L80?

draw.io Diagrams

You‘re viewing this with anonymous access, so some content might be blocked.

/

What do the LEDs and beeping mean on a PIN Pad?