/
Updating the Firmware on a VP3300USB or VP8300

Updating the Firmware on a VP3300USB or VP8300

Make sure you select the correct Firmware Update Package for your device. There are currently two options available: NEO 1.01 or NEO 1.10.

  • Use NEO 1.01 to update solutions that achieved an EMV L3 accreditation under the now-expired EMV L1 Certificate (Contact: 13386 1115 400 21 FIM, or Contactless: 10490 1015 231 231b 231a FMT).
  • Use NEO 1.10 for new accreditations under the current EMV L1 Certificate (Contact: 16956 0220 430 43c 43c FIMT, or Contactless: 16397 1218 260 26b 26b FIMT).

Updating Firmware

  1. Download and unzip the firmware update package from VP3300USB (IDVP-XXXX) - Home
  2. Make sure the reader is in USB-HID mode (you cannot update the firmware from USB-keyboard mode).
  3. If upgrading from NEO 1.01 to NEO 1.10, ensure you follow the guide below:
    Updating the VP3300 and VP8300 Kernel from 1.01 to 1.10
  4. Open the latest version of uDemo and select the Update Device Firmware command. Navigate to the firmware image extracted in step 1 and select Open.

The latest version of uDemo is available from this page: Universal Library for Visual Studio - Home

Related content

Updating VP3300 Readers to FW v1.10 with the VP3300 Firmware Update App
Updating VP3300 Readers to FW v1.10 with the VP3300 Firmware Update App
More like this
How to update the firmware and kernel on a VP6300
How to update the firmware and kernel on a VP6300
More like this
VP3600 Firmware: How to check the version and update
VP3600 Firmware: How to check the version and update
More like this
VP6300 or NEO2 device: How to update the firmware
VP6300 or NEO2 device: How to update the firmware
More like this
VP3600 (IDMR-PBTXXXXXAAA): Home
VP3600 (IDMR-PBTXXXXXAAA): Home
More like this