Templates

Knowledge Base

  • All content
  • Space settings
Results will update as you type.
  • How can I check if encryption is enabled for my SecureMag/SecureHead? i.e. How do I check the security level on a SecureMag/SecureHead?
  • EMV L3 Certification Overview
  • EMV transaction, how was the card presented (Swiped, Tapped or Dipped...MSD, Fallback)?
  • FAQ: 2DScan FX100
  • FAQ - Android
  • FAQ - EconoScanII
  • Can I Use an iMagProII to Form-Fill a Website on Safari?
  • How Can I Use RKI (Remote Key Injection) From the uDemo?
  • Can I update the firmware on a SecuRED?
  • How to adjusting the RTC in VP5300 to make transaction times accurately reflect local time?
  • How to Perform an EMV Transaction Test with an Augusta/Augusta S in USB HID Mode?
  • How can I decrypt encrypted data?
  • How to Configure the Date and Time on MiniSmart II?
  • Do you have an example of how one might configure the VP3300 or any contactless reader for an L3 certification?
  • What would cause the Windows OS to fail to recognize the Augusta reader when connecting to a USB port?
  • Do you have a tool for calculating the CRC for a command?
  • How Do I Verify the Key in a SecureHead or a SecureMag?
  • What do the different Security Levels mean in SecureMag/SecureHead, SecureKey, SREDKey/SREDKey2?
  • Can ID TECH tell me what AIDs, CAPKs, and Terminal Settings I Need to Load into my EMV Reader?
  • FAQ - BTMag
  • Can I Use my ID TECH Bluetooth Reader with Windows?
  • How to Clear the Removal Detection Logs in an L80 Using a VP5300?
  • Connecting a VP3600 to iOS or Android via Bluetooth
  • Can an Augusta be injected with a DEK, but with encryption not enabled?
  • Grounding guidelines for IDTECH readers to optimize the ESD protection
  • FAQ - Unipay
  • FAQ - Magnetic Encoders and EZWriter
  • How Do I Enable/Disable Quick Chip for KeyBoard Emulation (QCKB) on the Augusta?
  • FAQ: Customer Support Portal
  • How do I determine if a mobile service was used to process a sale (with Apple Pay etc.)?
  • FAQ: Xamarin
  • Can SecureKey Require the User to Enter a CVV?
  • An Example of Accessing Mifare Classic Cards
  • Augusta QC KB: How Do I Set My Device's Serial Number for an EMV Transaction?
  • Does the VP5300 support the MasterCard Relay Resistance Protocol? If so, how to activate it?
  • Can the Firmware be updated on the UniPay 1.5? 
  • FAQ - EconoScan & Versa Scan
  • Do you have a extension cable that works with UniMagII/Shuttle?
  • Audio Jack Care
  • Can the SREDKey 2 be Key Injected by the Same Method as a SREDKey?
  • How can I get, find and retrieve EMV Tags?
  • FAQ - MiniMag & Easy Mag
  • FAQ - Encryption Decryption
  • Augusta, Android, and USB Keyboard Mode Integration
  • Examples of parsing - Vendi, Neo