How to test/demo an SREDKey?

For a USB-KB version (IDSK-XX4XXX): 

You can test the device using Windows Notepad or any text editor. Swipe a card or complete a manual entry. The resulting output will be visible in the text editor

1. Connect the unit to an available USB port
2. Launch Notepad or any text editor
3. Swipe a mag stripe card, you should see data. the reader IS working
4. Follow the prompts to complete a manual entry, hit enter for each response, when you have responded to all the prompts, the unit will output the results to you text editor.
   
   

For USB-HID version (IDSK-XX5XXX):

You will need to install the SREDKey USB Demo app (80137802-006-A SREDKey USB Demo V1.02.6 .zip)

1. Connect the unit to an available USB port
2. Launch the SREDKey USB Demo app, 
3. Swipe a mag stripe card, you should see data. the reader IS working
4. Follow the prompts to complete a manual entry, hit enter for each response, when you have responded to all the prompts, the unit will output the results to you the demo app.