Spaces
Apps
Templates
Create
Knowledge Base
All content
Space settings
Content
Results will update as you type.
Products - Home
Products - Retired
Tools - Home
Areas of Knowledge - Home
How-To Articles
•
Developing for EMV, Part III
•
-FAQ: EMV transaction trouble shooting
•
-FAQ: Firmware
FAQ - iMag Pro II
•
What is the lowest version of iOS that the device/SDK will support?
•
-FAQ: QuickChip Keyboard (QCKB) - Implementation & Integration
•
FAQ - Transarmor for ID TECH products
•
-FAQ: VP3300 USB
•
How does an ID TECH encrypted card reader identify a card as a "financial card"?
•
How Does a VP3300 BT Connect to Apps?
•
How does one split / combine cryptographic keys?
•
How do I connect to a VP3300BT with an iOS device (Apple)?
•
How do I enable RRP on NEO II projects.
•
How do I set/check the Keyboard Polling Interval for an SREDKey?
•
How Do I Set the Keyboard Polling Interval on a SREDKey/SecureKey?
How Do I Set the Whitelist on VP3300 and Augusta Readers?
•
How do I slow down/fix the output of the reader using the Set Character Delay command/feature?
•
How do I update the firmware on a Spectrum Pro?
•
How do I update the firmware on the Augusta/MiniSmart II?
•
How do I verify that my Spectrum Pro is injected with a key and is encrypting MSR and EMV data?
•
How Do I Verify the Key in a MiniSmart II Reader?
•
How long do I need to wait before next swipe (SecureMag)?
•
How to arm reader for any card presentation (swipe, dip, tap)
•
How to capture / trace USB communications with an ID TECH device using BusHound?
•
How to Change the CVM Result from "No CVM Performed" to "Online PIN"
•
How to change the masked data presentation on a VP5300 (or other NEO device)? pre-PAN, post-PAN and mask character
•
How to change USB-KB mode data to look the same as USB-HID data?
•
How to check (and set) if my SecuRED is in USB/HID or USB/KB and how to check the security level?
•
How to check and set the date and time (RTC real time clock) on a NEO device (UniPay 1.5) in uDemo
•
How to Check Key Status and Key Info for NEO or NEO 2 Products
•
How to check MiniSmart II Key status.
•
How to check whether the VP5300 reader and L100 pin-pad are paired or not?
•
How to clone the configuration setting from a known working MiniMag II or SecureMag reader to a new reader?
•
How to Configure VP3300\VP8300 for Quick Chip KB (QCKB) emulation over HID?
•
How to connect VP3300 BT to iPhone/iPad using SDK demo app
•
How-to: Contactless - Configurable AIDs and Groups. Delete / Disable AIDs (NEO2)
•
How to control the Augusta output speed in QC USB KB mode?
•
How to control the pre-PAN/Post-Pan with the mag stripe mask data returned by the VP5300 via the 02-40 command?
•
How to control which tracks are output on SecureMag, SecureHead, MiniMag, Omni?
•
How to decrypt a PIN block (tag 99) using uDemo?
•
How to delete/disable AIDs on contactless readers
•
How to disable (lock) the Admin key on the SecureKey and SREDKey?
•
How to disable the power saving of the USB ports on my PC?
•
How to display a message on LCD display of Vendi reader?
•
How to Enable Escape Command for TM3 USB CCID driver
•
How to Enable RRP on NEO 2 Projects
•
How to Enable TransArmor on a Device
•
How to enable USB-HID mode on SREDKey
•
How to fix "Start EMV failed Error Code: 0xF212: Transaction Type Error" on Augusta USB-HID mode
•
How to fix the "Fail to Open" PS2 KB MSR with the latest JPOS MSR driver 80128802-002 on a Windows Embedded POSReady 7?(32bit)
•
How to Get and Set the Friendly Name for a VP3300BT
•
How to get product update notifications. How to get notified when new firmware is release.
•
How to get the KSN or KSI from an Augusta
•
How to get the updated USB serial driver for the WCR3227-xxxU series?
•
How to get the USB/HID TransArmor SecureMag (model: IDRE-335133B-RP) recognized correctly by Windows 8/10?
•
How to handle Issuer Scripts un an EMV transaction?
•
How to Load an EMV CAPK from a File Using uDemo
•
How to load (with SDK) a standard SREDKEY (IDSK-534883AEB) to Shift 4 SREDKEY (IDSK-534883AEB-S1)?
•
How to parse the USB/KB encrypted data correctly with Parsomatic?
•
How to perform a Remote Key Injection RKI
•
How to poll the Spectrum Pro for information?
•
How to program a 2D Scan (IDBA-6641LRB) to append a Tab instead of the default Enter at the end of the output?
•
How to program the SREDKey with a F7 as prefix and F8 as suffix?
•
How to read/write Mifare Plus card?
•
How to read/write MiFare standard( type 04) card
•
How to reconnect a disconnected VP3300BT?
•
How to re-initialize the MSR key after the VP5300 firmware upgrading?
•
How to reset an Augusta reader to default settings
•
How to reset a reader to default settings in MagSwipe Configuration Utility
•
How to reset default settings on MiniMag II or SecureMag
•
How to Retrieve the KSN from a MiniSmart II
•
How to save Contactless AIDs (NEO and NEO2 devices)
•
How to Send Configure file-Brief version?
•
How to Set and Update the Device Clock
•
How to set Device Date and Time on NEO II readers.
•
How to Set Kernel Config and How to Save Terminal Data using uDemo
•
How to set the Polling Interval on a MiniMag II?
•
How to switch Augusta (HID) to Augusta KB in uDemo
•
How to switch Augusta KB to Augusta (HID) in uDemo
•
How to test/demo an SREDKey?
•
How to test LEDs and Buzzer on a contactless (Vivo) reader?
•
How to troubleshoot a CDA failure
•
How to Turn Off the Beeper on an Augusta or Augusta S
•
How to update the firmware and kernel on a VP6300
•
How to update the Firmware for a Kiosk III?
•
How to update the firmware on an SREDKey?
•
How to update the firmware on a VP5300? (and maybe an L100 PIN pad)
•
How to update the out of date .dll files in the Augusta demo (or other product specific Demo)?
•
How to use 03-00 / 03-40 commands and parse the results
•
How to use Autoconfig feature in the UniMag Demo?
•
How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
•
How to use the MagSwipe Configuration software to send a manual command to the reader?
•
How to use the SecureMag Demo to collect the required data for troubleshooting?
•
How to use VC Demo to test an USB/CCID Hybrid Insert reader?
•
IDRE-335133BR (Transarmor SecureMag) Not Working on Windows 10
•
ID TECH’s Gen 1 vs Gen 2 Contact Kernels
•
I got the AC after the Authenticate Transaction. Is it safe to assume that the value returned in the 9F26 tag is the ARQC?
•
Information for MINDBODY users
•
Inquiring about devices - Autoconfig Issue
•
Integrating Applications for Multiple ID TECH SDKs
•
I sometimes see evidence of corruption in the returned card data...How can I fix this?
•
Is There a Way to Remove All Groups, AIDs, CAPKs in a NEO Product (e.g., KIOSK III)?
•
Mifare access example
•
MM2 USB/HID Rawinput Support
•
Mobile Reader keyboard emulation
•
My iMag Pro II stopped working what should I do?
•
My MiniSmart II does not appear in the Windows Device Manager. What can I do?
•
My SREDKey Displays "Key Not Injected." How Can I Fix This?
•
My SREDKey or SecureKey displays "Key Not Injected" when I tried to manually enter the card number and swipe a card . How can I fix this?
•
My SREDKey/SecureKey Screen Displays "Activating..."; What Should I Do?
•
My VP3300USB is stuck in USB KB mode, how do I get it back to the USB/HID mode?
•
My VP3600 prompts for "press key seq". What should I do?
•
NEO 1.2 - Home and FAQ
•
NEO 2 - Home and FAQ
•
NEO IDG Quick Reference (Rev. 151)
•
NGA Command_Response Protocol
•
NGA, MiniSmart II, How to increase the Idle Waiting Time to 4s
•
Pairing an VP5300 or VP5300M with an L80 and Configure it for an EMV Transaction Test
•
Parsomatic. How to parse TLVs? How to parse transaction data (EMV, MSR or MSD)?
•
PCI DSS - 13 Guidelines
•
Performing a Contact EMV Transaction Test with the VP5300
•
Performing an Offline PIN Transaction Without a PEK on the VP3600
•
Product Integration Topic - Augusta QuickChip KeyBoard fallback behavior
•
Proving NFC Peer-to-Peer messaging on a KioskIII (ISO 18092)
•
Pulling MSR Data with an Augusta Working in HID Buffer Mode
•
Q & A related to the salt keys injected into the products such as NEO II, KIOSK IV and KIOSK V (SRED and Non-SRED version units)
•
Requesting an RMA Number to Return Units for Repair
•
RKI (remote key injection) Errors:
•
SecureKey M130 Setting the Admin Level
•
Service Code and L2 common Kernel
•
SmartTap - Configuration command example
•
Spectrum Pro Chome Demo - Instructions
•
SREDkey vs. SREDkey 2 Comparison
•
There is an GPO error. How can I config tag 9F1D (Card Terminal Validations) for my MasterCard tests?
•
Token Request Identified (TRI) Instructions
Troubleshooting articles
•
Understanding PIN Pad Encryption/Decryption
•
Understanding the Bluetooth connection pro
•
UniMag Android Common Settings issues
•
UniMag Android SDK Manual XML Configuration
•
UniMag Common Issues for iOS SDK
•
EMV Transactions with Universal SDK
•
FAQ - SREDKey 2
•
FAQ - OMNI Readers
•
FAQ - SREDKey
•
BluScan IDBA-4243LRB: Removing the Enter at the End of Data Output
•
How can I check if encryption is enabled for my SecureMag/SecureHead? i.e. How do I check the security level on a SecureMag/SecureHead?
•
EMV L3 Certification Overview
Show more below
Blogs
Apps
draw.io Diagrams
Knowledge Base
/
How-To Articles
/
How to reset an Augusta reader to default settings
Summarize
How to reset an Augusta reader to default settings
IT-ADMIN G (Deactivated)
Owned by
IT-ADMIN G (Deactivated)
Jan 02, 2020
Loading data...
(click to enlarge)
{"serverDuration": 24, "requestCorrelationId": "83253c7882ef40ebbbd4f3a90a7ada95"}
