How to Enable TransArmor on a Device

Owned by Chris Barton
Last updated: Feb 03, 2020
1 min read

ID TECH devices require two steps to use TransArmor: loading a TransArmor certificate and setting the TransArmor ID:

  1. Load the TransArmor certificate with the Load Certificate for TransArmor Encryption (C7-50) command.
  2. Set the device's TransArmor TID with the Set TransArmor TID (C7-51) command.

Note that the TransArmor certificate must be in DER format when sent to the reader.

See your product's Interface Developer's Guide for details on the TransArmor commands above.