How to control the Augusta output speed in QC USB KB mode?
When working in the USB KB Quick Chip mode, sometimes, the reader's default data outputting speed is too fast for the app to get the data correctly (especially a web-based online app). You can slow it down by sending the "53 12 01 3x" command using our uDemo following the numbered steps as shown in the screenshot below:
 Note:
x ranges from 0 to 5 with the 0 to be the default for 2ms delay. In general, the bigger the number, the slower the output goes (except for 6Â means 0ms delay)
Related articles