/
How to Enable TransArmor on a Device
How to Enable TransArmor on a Device
- Chris Barton
Owned by Chris Barton
ID TECH devices require two steps to use TransArmor: loading a TransArmor certificate and setting the TransArmor ID:
- Load the TransArmor certificate with the Load Certificate for TransArmor Encryption (C7-50) command.
- Set the device's TransArmor TID with the Set TransArmor TID (C7-51) command.
Note that the TransArmor certificate must be in DER format when sent to the reader.
See your product's Interface Developer's Guide for details on the TransArmor commands above.
Related content
-Transarmor: Home
-Transarmor: Home
Read with this
FAQ - Transarmor for ID TECH products
FAQ - Transarmor for ID TECH products
More like this
How do I Check and Activate Encryption on the Augusta?
How do I Check and Activate Encryption on the Augusta?
More like this
How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
How to use the IDTECH SecureKey USB Demo to collect the required data for troubleshooting?
More like this
How to Enable Escape Command for TM3 USB CCID driver
How to Enable Escape Command for TM3 USB CCID driver
More like this
UniMag Utility Autoconfig Walkthrough for Android
UniMag Utility Autoconfig Walkthrough for Android
More like this