Spaces
Apps
Templates
Create
Knowledge Base
All content
Space settings
Content
Results will update as you type.
Products - Home
Products - Retired
Tools - Home
Areas of Knowledge - Home
How-to articles
•
Developing for EMV, Part III
•
-FAQ: EMV transaction trouble shooting
•
-FAQ: Firmware
FAQ - iMag Pro II
•
What is the lowest version of iOS that the device/SDK will support?
•
-FAQ: QuickChip Keyboard (QCKB) - Implementation & Integration
•
FAQ - Transarmor for ID TECH products
•
-FAQ: VP3300 USB
•
How does an ID TECH encrypted card reader identify a card as a "financial card"?
•
How Does a VP3300 BT Connect to Apps?
•
How does one split / combine cryptographic keys?
•
How do I connect to a VP3300BT with an iOS device (Apple)?
•
How do I enable RRP on NEO II projects.
•
How do I set/check the Keyboard Polling Interval for an SREDKey?
•
How Do I Set the Keyboard Polling Interval on a SREDKey/SecureKey?
How Do I Set the Whitelist on VP3300 and Augusta Readers?
•
How do I slow down/fix the output of the reader using the Set Character Delay command/feature?
•
How do I update the firmware on a Spectrum Pro?
•
How do I update the firmware on the Augusta/MiniSmart II?
•
How do I verify that my Spectrum Pro is injected with a key and is encrypting MSR and EMV data?
•
How Do I Verify the Key in a MiniSmart II Reader?
•
How long do I need to wait before next swipe (SecureMag)?
•
How to arm reader for any card presentation (swipe, dip, tap)
•
How to capture / trace USB communications with an ID TECH device using BusHound?
•
How to Change the CVM Result from "No CVM Performed" to "Online PIN"
•
How to change the masked data presentation on a VP5300 (or other NEO device)? pre-PAN, post-PAN and mask character
•
How to change USB-KB mode data to look the same as USB-HID data?
•
How to check (and set) if my SecuRED is in USB/HID or USB/KB and how to check the security level?
•
How to check and set the date and time (RTC real time clock) on a NEO device (UniPay 1.5) in uDemo
•
How to Check Key Status and Key Info for NEO or NEO 2 Products
•
How to check MiniSmart II Key status.
•
How to check whether the VP5300 reader and L100 pin-pad are paired or not?
•
How to clone the configuration setting from a known working MiniMag II or SecureMag reader to a new reader?
•
How to Configure VP3300\VP8300 for Quick Chip KB (QCKB) emulation over HID?
•
How to connect VP3300 BT to iPhone/iPad using SDK demo app
•
How-to: Contactless - Configurable AIDs and Groups. Delete / Disable AIDs (NEO2)
•
How to control the Augusta output speed in QC USB KB mode?
•
How to control the pre-PAN/Post-Pan with the mag stripe mask data returned by the VP5300 via the 02-40 command?
•
How to control which tracks are output on SecureMag, SecureHead, MiniMag, Omni?
•
How to decrypt a PIN block (tag 99) using uDemo?
•
How to delete/disable AIDs on contactless readers
•
How to disable (lock) the Admin key on the SecureKey and SREDKey?
•
How to disable the power saving of the USB ports on my PC?
•
How to display a message on LCD display of Vendi reader?
•
How to Enable Escape Command for TM3 USB CCID driver
•
How to Enable RRP on NEO 2 Projects
•
How to Enable TransArmor on a Device
•
How to enable USB-HID mode on SREDKey
•
How to fix "Start EMV failed Error Code: 0xF212: Transaction Type Error" on Augusta USB-HID mode
•
How to fix the "Fail to Open" PS2 KB MSR with the latest JPOS MSR driver 80128802-002 on a Windows Embedded POSReady 7?(32bit)
•
How to Get and Set the Friendly Name for a VP3300BT
•
How to get product update notifications. How to get notified when new firmware is release.
•
How to get the KSN or KSI from an Augusta
•
How to get the updated USB serial driver for the WCR3227-xxxU series?
•
How to get the USB/HID TransArmor SecureMag (model: IDRE-335133B-RP) recognized correctly by Windows 8/10?
•
How to handle Issuer Scripts un an EMV transaction?
•
How to Load an EMV CAPK from a File Using uDemo
•
How to load (with SDK) a standard SREDKEY (IDSK-534883AEB) to Shift 4 SREDKEY (IDSK-534883AEB-S1)?
•
How to parse the USB/KB encrypted data correctly with Parsomatic?
•
How to perform a Remote Key Injection RKI
•
How to poll the Spectrum Pro for information?
•
How to program a 2D Scan (IDBA-6641LRB) to append a Tab instead of the default Enter at the end of the output?
•
How to program the SREDKey with a F7 as prefix and F8 as suffix?
•
How to read/write Mifare Plus card?
•
How to read/write MiFare standard( type 04) card
•
How to reconnect a disconnected VP3300BT?
•
How to re-initialize the MSR key after the VP5300 firmware upgrading?
•
How to reset an Augusta reader to default settings
•
How to reset a reader to default settings in MagSwipe Configuration Utility
•
How to reset default settings on MiniMag II or SecureMag
•
How to Retrieve the KSN from a MiniSmart II
•
How to save Contactless AIDs (NEO and NEO2 devices)
•
How to Send Configure file-Brief version?
•
How to Set and Update the Device Clock
•
How to set Device Date and Time on NEO II readers.
•
How to Set Kernel Config and How to Save Terminal Data using uDemo
•
How to set the Polling Interval on a MiniMag II?
•
How to switch Augusta (HID) to Augusta KB in uDemo
•
How to switch Augusta KB to Augusta (HID) in uDemo
•
How to test/demo an SREDKey?
•
How to test LEDs and Buzzer on a contactless (Vivo) reader?
•
How to troubleshoot a CDA failure
Show more below
Blogs
Apps
draw.io Diagrams
Knowledge Base
/
How-to articles
/
-FAQ: EMV transaction trouble shooting
Summarize
-FAQ: EMV transaction trouble shooting
IT-ADMIN G (Deactivated)
Owned by
IT-ADMIN G (Deactivated)
Last updated:
May 11, 2020
Version comment
1 min read
Loading data...
Page:
How to troubleshoot a CDA failure
{"serverDuration": 20, "requestCorrelationId": "e33e83cff9c34eb0a064e10d5cd542ff"}
IT-ADMIN G (Deactivated)