How to control the Augusta output speed in QC USB KB mode?

Owned by Yan Mu
Last updated: Apr 20, 2023 by Hamdy Atakora (Unlicensed)Version comment
1 min read

When working in the USB KB Quick Chip mode, sometimes, the reader's default data outputting speed is too fast for the app to get the data correctly (especially a web-based online app). You can slow it down by sending the "53 12 01 3x" command using our uDemo following the numbered steps as shown in the screenshot below:

 Note:

x ranges from 0 to 5 with the 0 to be the default for 2ms delay. In general, the bigger the number, the slower the output goes (except for 6 means 0ms delay)