How to Change a VP6300 Reader's Baud Rate from the Default to 9600

Owned by Yan Mu
Last updated: Apr 20, 2023 by Hamdy Atakora (Unlicensed)Version comment
1 min read

The change baud rate command is only supported with the reader connecting to a COM port and working in the RS232 interface mode; it is not supported with the reader working in USB interface mode.

Follow the steps below to change a VP6300 reader's baud rate:

  1. Connect the reader to a COM port
  2. Launch uDemo, which you can download here: Universal Library for Visual Studio - Home.
  3. Set uDemo to the default baud 115200 under Connection > Serial Port Options > Baud Rate (refer to the second screenshot below).
  4. Select the NEO 2 option under Connect To Device to connect to the reader.
  5. Send the 30-01-01 command by following the steps shown in the screenshot below:
  6. After the successfully sending the command, cycle the power to the reader, set the Baud Rate to 9600, and then select NEO 2 to connect to the reader again in the new baud (see screenshot below):