Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

When working in the USB KB Quick Chip mode, sometimes, the reader's default data outputting speed is too fast for the app to get the data correctly (especially a web-based online app). You can slow it down by sending the "53 12 01 3x" command using our uDemo following the numbered steps as shown in the screenshot below:

 Note:

x ranges from 0 to 5 with the 0 to be the default for 2ms delay. In general, the bigger the number, the slower the output goes (except for 6 means 0ms delay)

  • No labels