Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Q: Where can I find and download the user manual?

Downloaded the user manual from our website. 

Q: How do I get rid of the "*" on both sides of the Code 39 barcode data output?


A: To disable the output of the "*" for Code 39, scan the following barcode on Page 69 of the manual:

  1. Code Programming ON
  2. Transmit Neither "*" under Transmit Start & Stop Character section
  3. Code Programming OFF
  4. Test read the barcode to confirm the "*" characters are gone

Q: How do I append a Tab at the end of the bar code output?


A: To append a Tab at the end of the output, scan the following barcodes:

  1. Code Programming ON (on page 126)
  2. Enable User Suffix
  3. Program User Suffix
  4. 0 (on page 137)
  5. 9 (on page 138)
  6. Save (on page 139)
  7. Code Programming OFF (on page 126)

Q: I set the scanner to the factory default, it won't output the data in a text editor now. What should I do to get it back to work?

A: Set the reader back to USB/Keyboard interface by scanning the following barcode on page 30:

  1. Code Programming ON
  2. Select USB HID-KBW
  3. Code Programming OFF

Q: How do I set the scanner to skip the "*" for Code 39 output (*12345 -> 12345"), and insert Space at the very end as a terminator (12345space12345)?

A: Scan the following setup barcodes in sequence:

  1. Code Programming On from any page of the manual
  2. Transmit Neither "*" (on page 69)
  3. Enable User Suffix (on page 126)
  4. "2" & "0" (on page 137)
  5. "Save" (on page 139)
  6. Code Programming Off (from any page of the manual)

Q: I am using Excel, and when I scan my barcode it skips a line after the scan. How do I make it go to the next line?


Please scan the following barcodes in sequence from the manual on page 126:

  1. Scan the Code Programming ON
  2. Enable Stop Suffix
  3. Program Stop Suffix
  4. Program Ox0D as Stop Suffix
  5. Code Programming Off

Q: How do I reset the IDBA-6641LRB USB keyboard emulation interface scanner default?

A. Scan the following barcodes in sequence from the manual on page 23 to reset the scanner to the factory default first:

  1. Code Programming ON
  2. Load All Factory Default
  3. Code Programming OFF
B. Scan the following barcode in sequence on page 30 to set it to USB/Keyboard emulation interface:
  1. Code Programming ON
  2. Select USB HID-KBW
  3. Code Programming OFF

Q: How do I set the scanner to add an Enter at the end of the output for a USB/KBW interface scanner with Firmware Ver: 3.06.038?

A. Please scan the following barcodes:

  1. Code Programming ON (on page 127)
  2. Enable Terminal
  3. Program 0x0D as Terminal
  4. Code Programming OFF (on page 127)


Note: Units with Firmware Ver: 3.06.026 add Enter by default.

See also:

  • No labels