-C05.zip

01 Oct 2021 

goofy.liu

V3.2.4.001-C05, EVT2-2

• 1.Fixed S/N Issue.
  Pre-fetch 12-01 Response 62 (Empty S/N) Problem
• 2.Update BLE Test Procedure.
  Move Switch SIM2 after Get BLE Address Cmd.
• 3.Added Light Sensor Check in Assembly 
   *[Dev] Adding new SaveName2 Attrs.
   Ex: ToType_0_HexStr_1_ASCII="2_HexStrReversed;3_HexStr2DecStr;0_HexStr"

3.1 Board Level - No Range Check since Board Status
3.2 Assembly Level - The density of illumination value range check since
light pipe installed verification.

-C02.zip

22 Sep 2021 

goofy.liu

-C03.zip

06 Sep 2021 

goofy.liu

• 1.Test Items Updated
  +Printer Function, Production Mode.
• 2.Fixed Issue.
  Tamper Timeout No Reaction.
• 3.[FineTune][Production Mode]
  SIM1 Test -> BT Test --> SIM2 Test
• 4.SFIS Log File Support. 
  (Supported by Shawn Li)

-C02.zip

02 Sep 2021 

goofy.liu

• 1.Fixed Part Issues from Ruby's Report

Unfixed: 
  A.Tamper Timeout Waiting Issue.
  

• 2.Board Level Test Jig1+Jig2 Test Scripts Updated.
• 3. Assembly/Production Test are under Development.

-C01.zip

27 Aug 2021 

goofy.liu

• V3.2.3.001-C01, EVT2-2
  1.Board Level Test Added
    1.A Jig1 . Board - EE
    1.B Jig2 . Board - RF
    See the shared point doc 
    https://idtechproducts.sharepoint.com/:x:/r/sites/Whitesand/_layouts/15/doc2.aspx?sourcedoc=%7BF4DC9E1D-42AB-4C12-A832-B7EEE5CF8FEE%7D&file=EVT2_SMT1_unit_status_v1.xlsx&action=default&mobileredirect=true&cid=4173b223-5fe8-479c-8ff3-e71c81575e19
    Page : TS01.Coverage-Board, Jig1 + Jig2 Test Coverage, Green Part Item with test cycle time(secs)
• 2. Fixed Issues reported from Ruby.Lu@Firmware Team.
    Shared Point Page : "TS Tool Issue Tracking List"

-C09.zip

28 Jul 2021

Shawn Li

Wifi test, 正对对cmd, 减少了retry times和Interval. 如此, 一旦test fail，不会等太久时间。

-C08.zip

16 Jun 2021 

goofy.liu

V .keypad要改成跟SAM card一樣，其中一項fail還是要繼續下一項。目前是會直接結束整個測項。

  Ans: 8810, done

V .發現RT1052 touch測項，VP8810跟VP6825沒有一致，測試方式需一致。目前為VP8810 touch結束會show logo，VP6825 touch結束會show黑色白色畫面。

  Ans: 8810 --> Show Logo

V. K81 LED測項的提示字，VP8810也被改掉了，VP8810應改為"4"個燈，VP6825維持"3"個燈。目前為VP8810, VP6825文字提示都顯示"3"個燈。

  Ans: 8810, done

V.(6/16更新) K81 touch不需要測LCD螢幕show不同顏色，因為和RT1052touch+LCD功能重複。

  Ans: 6825, K81 Touch Test doesn't show Colors.

if firmware version error. 

   A = Golden Sample

   B = Current one.

   Error = Display read A, but exptected B

   Correct = RT1050 null string, see TBD Item

TBD1. Ruby reported the error message display order is incorrect, waiting for her verification.

TBD2. (6/16更新) 測試結束的information中，RT1052韌體information 格式有誤須修正。

  Ans: 8810+6825 Confirm with FW Paul.

  Short term solution= Remove Null End part if possible.

-C07.zip

11 Jun 2021 

goofy.liu

• 1.Fixed K81 Touch Command Issue
   invalid: 2400
   correct: 2403
• 2.Update BottonCell Volt Check Method.
   Validating Range: 3.0V ~ 3.4V. 
   Divisor = 820, NEO3x platform (VP8810, 6825, 8200, BryceCanyon)
   Note: Top Status Strip Bar displays this information.
• 3.Ethernet Ping Issue Workround.
  Since LTE test item has side-effect of Ethernet Test.
  Short-term Solution: Ethernet --> LTE Test.
  Final: FW Issue must be resoleved. --> Ask FW Team's Help.
• 4.HW ID Test Item being Added in "Device Info" Item.
  White Sand = 0x01.
  Bryce Canyon = 0x03.
• 5.K81 Touch Panel Test Updated.
• 6.Updated Backlight Test Item.
   6.1 Show Logo First, preventing from Black Screen Status.

-C06.zip

10 Jun 2021 

goofy.liu

• 1.Added Test Item
    1.1 Serial Number Injection
• 2.Fixed Issues.
    2.1 K81 LED Test. Incorrect Message
       old: 4 LEDs
    correct: 3 LEDs

-C05.StopIfErr.zip

09 Jun 2021 

goofy.liu

Same as -C05, but auto run stops if any error raised !!

-C05.zip

09 Jun 2021 

goofy.liu

• 1.SAM Card Test.
   Added Interval Time : 800ms, for FW stablized Reading processing time.
• 2.Turn ON the function "Auto Run Next Item and don't care failed status.

-C04.zip

08 Jun 2021 

goofy.liu

• 1.LTE SIM1+SIM2 Test Scripts Updated.

  Always Power OFF --> Insert/Remove SIM Card --> Power ON

• 2.SAM Card Test Scripts Updated.

  Continue Test If current test step raised error.

-C03.zip

04 Jun 2021 

goofy.liu

• 1.Part Number Updated
  [+] 80163002-001, Bryce Canyon, Printer, WiFi/BT/LTE NA
  [+] 80163002-002, Bryce Canyon, Printer, WiFi/BT/LTE EMEA
• 2.Remove RS232 interface check during LTE Test.
• 3.Remove RS232 interface check during BT/BLE Test.
• 4.Add TBD function : Printer (Ping),- Byrce Canyon ONLY.

-C02.zip

03 Jun 2021 

goofy.liu Shawn Li

V3.2.2.001-C01 goofy.liu, EVT2-1

• 1.Test Items Updated

 1.1 Audio DAC Shorten Time

    Old: 90-13 + 110110

 New: 90-13 + 110001

-C01.zip

03 Jun 2021 

goofy.liu

• For EVT2-1
• 1.Test Items Update

[+]LTE

   LTE FW Info = USB Hub

   LTE SIM1 = SIM 1 Card Seat Module PIN

       SIM2 = SIM 2  "    "    "...

[M] WiFi : IDTECH_Production+16964727 (Hex String)

    BT : Cypress BLE USB Dongle - CY5677

 WiFi/BT

 Audio , Tx Data : 2 bytes --> 3 bytes.

    RFID/CLTS Test

-C01.zip

06 May 2021

-C01.zip

27 Jan 2021 

goofy.liu

• 1. rubyl (Deactivated) 's Xml Updated
• 2.Keypad Test Item Added, Shawn Li supported.
• 3.FormInit UI Updated.

  rbQA_TW, rbQA_US UI Controls Relocation.

-C03.zip

25 Jan 2021 

goofy.liu

•  rubyl (Deactivated) 's Test Items Integration.
• Fixed Wifi Item Name Can't display issue.
• Enable Continue to Run Next Test Item if the failure raised.
• Test Items Updated
  (*) = 1050
  [+] = Add
  [M] = Updated
  ------------------
  [+](*) Wifi Test
  [M] SAM Test, SAM x2 --> SAM x 4
  [+](*) Readio 4G LTE Test. SIM1 + SIM2
  [+] LCD
  [M] Tamper, Get DRS 

[+] Xml Files which are updated by rubyl (Deactivated) .

-C02.zip

22 Jan 2021 

goofy.liu

• 1.SD Card Test Item
  Adding 90-13 Timeout from 2000ms to 10000ms
• 2.ICC Card Test Item
  Remove 2C-12 Get ATR Response Format Check
• --[Fixed Issues]--

Error Logs

TS194_VP8810_V1.8.0.021-C01_SDcard_FAIL.txt

TS194_VP8810_V1.8.0.021-C01_ICC_FAIL.txt

TS194_VP8810_V1.8.0.021-C01_SDRAM_FAIL.txt

TS194_VP8810_V1.8.0.021-C01_RT1050LED_FAIL.txt

-C01.zip

21 Jan 2021 

Shawn Li goofy.liu Roger Lin (Deactivated)

NEO3 SMT2 - Initial Version, Board Level ONLY