Items | Comment | Keywords |
---|---|---|
90-07 Usage | 'Issue: FWVP5300-83TS173, VP5300 '2018 Aug 20, always send 90-07 + 01 to end scure task m_refobjRdrCmder.SystemSecurity_NEO20_UMFG_x9007_End(nTimeoutNewInSec)
TestTM_Common_PCI_SREC_UMFG_01SSTask_02DevReset_03TamperDisable(,) '1.Scenario Init + True, always 90-07+01 end secure task end secure task '3.[TestTM007_DateTimeSync]bIsPassed_Perform_UMFG_RTC_SerialNum_Set(), +)90-07,01 '4.[TestTM015_Tamper_NEO20_AR300] TestTM015_Tamper_V02_UMFG_TamperLog_Step_1_a_Act_Inject_Demo_SerNumKey_V02_AR300_NEO20(), -)90-07,01
'5.[TestTM015_Tamper_NEO20_AR300] before 90-02 enable tamper, -)90-07,01 ' after 90-02, will invoke 90-07,01 directly. '6.[TestTM015_Tamper_NEO20_AR300] At end of tamper test, do device reset again to prevent tampered status from ' large amount of power consumption. +)90-07,01 '
TestTM_Common_PCI_SREC_IS_UMFG_Mode(),always +)90-07+01, end secure task '2.[TestTM007_DateTimeSync], being used to check UMFG mode '7.[Button_TM001_MSR_Click], being used to check UMFG mode '8.[Button_TM004_LEDs_And_Buzzer_Click], being used to check UMFG mode '9.[TestTM026_ConfigSetChk], being used to check UMFG mode | UMFG 90-07 90-00 90-02 |
Manage space
Manage content
Integrations