[OBS] 002 - TS128, For Vend III


Target Product:

Vend III, AR, 2013

 


TI

VersionDescription
  
  

TS List

VersionDescription

V 1.04.009

V1.04.009, 2016 Jan 12 Release

------<Add>------

1.Auto Test All PASSED + Serial Number Exists

--> Auto Close / Disconnection

 

-------<Modification>-----

1.Firmware Version Check - Skip Processor ID Check

 

----<Known Issues>----

1.[USB HID] KeyPad Can't Work Properly

2.[USB HID] MSR Can't ""

V 1.04.008

V1.04.008, 2016 Jan 11 Release

------<Add>------

1.USB Test (USB-CDC = VCOM) In Firmware Version

  - Add UI Selection First Time After Connection

  - Fixed TM.800 Test Problems after VCOM connection.

 

-------<Fixed Bugs>-----

1.Blue LED Control - Invalid Parameters

V 1.04.007

=========================================
V1.04.007, 2016 Jan 08 Release
------<Add>------
1.USB Test (USB-CDC = VCOM) In Firmware Version
2.Integration From Other TS for Generic TS Framework

=========================================
V1.04.006, 2015 July 27 Release
[Modified]
1.TM.008/QC.008 SAM Check - Buzzer OFF (PollForCard & Deactive SAM Intf)
2.TM.002/QC.002 PICC - Deative Interface - Antenna OFF
3.Change Screenshot File format from bmp to jpeg

[Bug Fixed]
1.9A Tag Date - Year Combo Box List
=========================================
V1.04.005, 2015 July 08 Release
[Modified]
1.After Issue 0B-02 (Long Beep, 400ms period) to Vend III to performed beeping, add 500ms
delay waiting until beep end to avoid JIRA bug (Vend III Rebooting) for FW AR 2.1.4.
See JIRA bugs report.
a.VSF-2943
https://idtech01.managed.contegix.com/jira/browse/VSF-2943
b.VSF-2944
https://idtech01.managed.contegix.com/jira/browse/VSF-2944

2.
a)Built-in MSR QCard Test @ TM.001 MSR Item.
b)Built-in Test MSR Card (PN=80005202-002) Track Data
c)Add SS,ES
d)Track 1+2+3 must present.

3.Added Customized Part Number Input. Format: IDVV-3XXXXX[D][-ZZ]
Naming Rule: See "WI 4.2.3" Vend Section Document
Ex: IDVV-380131D


[Bugs Fixed]
1.After ICC Failed, TS couldn't perform MSR Test.

2.In QC Mode, if SN doesn't present, it must Fail.

3.TS Crashed while some IDG Cmd Timeout.

=========================================
V1.0.3.2, 2015 May 29 Release
[Modified]
1.[800 FWInfo Check]
Make Processor Serial Number Check Ignored...

[OS]
1.Windows XP is compatible.

=========================================
V1.0.3.0, 2015 March 01 Release
2.Modified Test Item Sequence for User operation easily.

[Fixed]
1.Language Selection Bug

=========================================
V1.0.2.5, 2015 Feb 20 Release
[Modified]

[Added]
<Engineer Mode>
(A) Single Test Loop
(B) Buadrate Enter Input
(C) C.1 Buzzer Only work on TM.011
    C.2 Long Buzzer @ TM.011
These 2 items are used to debug the Firmware Crash Problem in RTC Interrupt.

[Removed]
(1) USB HID, Vend III has USB CDC device ONLY (emulated RS232)
<*******************************************************>


=========================================
V1.01.002 - TS146
2016 Jan 07
----<Add>----
1.Power Down before disconnection buf after Admin Key Injection
for Unipay III & 1.5

---<Bug Fixed>---
1.Firmware Version Info Check After USB Connection.
Single test item clicking-to-run will cause reader type information
failed

------------------------------------------------------------
ToDo -
  1.Sometimes Contactless Test Failed @ Auto Test Mode.

=========================================
V1.01.001 - TS146
2016 Jan 04
----<Add>----
1.USB Connection in Item "Firmware Info"
QC Mode also needs it.

2.Fine Tune Disconnection Steps.

3.Firmware Version (TM.800 ) Check is First Test Item @ Auto Test Mode.
It also switches TS connection from RS232 to USB-HID between

---<Bug Fixed>---
1.ICC Test --> 2C-14 (ICC Power Off) has invalid timeout
(Non-Init Value) --> causes TS sends choas data.

=========================================
V1.01.000 - TS146
2015 Dec 30
----<Add>----
1.USB Connection in Item "Firmware Info"
Also Auto Rebooting Reader (Boot Mode --> App Mode)
After USB-HID Connection Test.

2.Admin Key Check After Admin Key Injection in Test Mode
@ AdminKye_Injection V1.00.004

3.QC Mode Test Items are updated depending on relative reader types.

---<Bug Fixed>---
1.QC Mode UI Modification for U
2.LED Test For Unipay 1.5 (Tri-Color LED ONLY)
3.Green LEDx4 Blinking at same time

=========================================
V1.00.009
2015 Dec 28
----<Bug Fixed>----
1.MSR resolution problem in Audio Jack - Converter Communication
2.Some Minor Potential Bugs
3.ICC Delay Time between each commands.

=========================================
V1.00.008
2015 Dec 24
----<Bug Fixed>----
1.Fixed Admin Key Injection RS232 Audio Jack Preamble Problem
"55" 30 bytes + "66" 1 byte
2.Reorder Auto Test Test Items Sequence

=========================================
V1.00.007
2015 Dec 23
----<Bug Fixed>----
1.ICC Power Down Subcommand changed
2C-14 --> 2C-18
=========================================
V1.00.006
2015 Dec 22
----<Add>----
1.Unipay 1.5 Test Support

=========================================
V1.00.005
2015 Dec 19
----<Modified>----
1.Add Single Loop Item Interval Control Field (0~9999999 ms)
2.Admin Key Injection : Test(Op) Mode + QC Mode

=========================================
V1.00.004
2015 Nov 6

---<Bugs Fixed>---
1.If not comports , there is a exception error pops up
2.Unipay III Busrt Mode default value is considered
as "OFF=0x00"
3.Add Loop Feature Delay 500 ms @ Engineer Mode
=========================================
V1.00.003
2015 Oct 6
----<Modified>----
1.TS### && [ReaderName] Keywords Support while Language Translation
2.UI Architecture Modification
3.Add LED Power Charged Check
=========================================
V1.00.002
2015 Oct 2
----<Modified>----
1.MSR Auto Poll+Burst Response Parsing Bug Fixed
2.Add ICC Power / Card Seat Command (60-14) to detect ICC status,
But not open for test it yet.
=========================================
V1.00.001
2015 Oct 01
----<Modified>----
1.Remove Buzzer Function, For Chingwei Debug Purpose
=========================================
V1.00.000
2015 Oct 01 Initial Release