SmartPIN L100 Required Cables and Power Supply
| Part No | Description |
|---|---|
| 81060228-001 | RS232: required power supply |
| 80141213-001 | Spectrum Pro to L100 Interface Cable* |
| 80141219-001 | VP5300 to L100 Interface Cable |
AC0005R-25 | Power Supply: Adapt;Switch;100-240Vac;+5V/1.0A;US plug;DSA-6PFG-05 FUS |
Q: Which End of the Cable Should Be Connected to the L100?
A. The end WITHOUT the power connector goes to the L100. The end WITH the power connector goes to the host PC.
Q: Is the L100 Backward-compatible with Any Existing PINpad (e.g., SmartPIN K100, etc.)?
A: Yes.
It's a PCI PTS-compliant device, right?
A: Yes.
Is the Removal Detection Activation/Deactivation Process the Same as the SmartPIN's Process?
A: L100 password is 8 digits, the older PINpad is 6 digits. When two new passwords are modified in the L100, the user does not need to restart the device and input the new passwords immediately.
What Key Injection Method Does the L100 Support?
A: All L100s support direct key injection. L100s with firmware version v1.03.006 or above also supports remote key injection.
If you have any additional questions about the SmartPIN L100, post them in the comments below and we will add the question(s) and answer(s) to this page.
Related Links:
SmartPIN L100 (IDPB-60XXXXM): Home