User Guide

Item	Description
Call Batch & Load Script, and Run Script Check
Steps to run	01 : Execute "NEO_IDGCmd_Player_MifareType.exe" to run IDG Command Player Tool → 02 : Select "02-Cust Script" item, then select Time (Unit: second) , for ex: 60 = 60 seconds. special : R1 = 1 round, 1 time of the script execution R10 = 10 rounds. where R= round special 02 : Manually input , ex01 : *R9999 = 9999 rounds* ex02 : *12345 = 12345 seconds* → 03 : Open Script File from the sub-folder "script" , 04 : Here is an example script "RFID_PollForToken_TxRx_R1.txt" for Customer FCC Tool. To make sure "Loaded Customized Tx/Rx Data Okay" message ON . → 05 : Clicking "Start" to connect DUT, running the script, display Okay/Failed Symbols until done. → 06 : Clicking "Close" to terminate the test running. → 07 : Okay/Failed Symbols
Round / Time Definition	R1 = 1 Round R10 = 10 Rounds, Repeated 30 = repeated rounds until the duration : 30 seconds 60 = repeated rounds until the duration : 60 seconds ... 3600 = repeated rounds until the duration : 3600 seconds 7200 = 2 hours 14400 = 4 hours 28800 = 8 hours 43200 = 12 hours 86400 = 24 hours, 1 day.
PDF Type	IDGCmd_Player_UserGuide_V01.pdf

Download Link

Version	Date	Comment
V 1.00.005
-C01.7z	23 Oct 2019	goofy.liu 1. Make a FCC Tool (Poll For Token Only) Script File. 2. Add customized input time / round support. Manually input , ex01 : R9999 = 9999 rounds ex02 : 12345 = 12345 seconds Script File: Poll For Token, no buzzer RFID_PollForToken_TxRx_R1.txt
V 1.00.001
-C01.zip	03 May 2018	V 1.00.001-C01, 2018 May 03, goofy.liu 1.Support Round Mode. R1 = 1 Round R100 = 100 Rounds 2.Customized Docklight Logs Loading Allowed. Ex: Key word = "[TX] - " /// 1. Enable Pass-Through mode [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 01 00 01 01 1D 19 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 00 1C 9B /// 2. Poll for token [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 02 00 02 0A 14 E3 51 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 05 03 D3 AC 5A E3 2D 39 /// 3. Mifare auth (2C-06) [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 06 00 08 01 01 FF FF FF FF FF FF 4B C8 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 00 1C 9B /// 4. Mifare Read Blocks (2C-07) [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 07 00 02 33 10 3F 8F [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 30 87 19 00 00 78 E6 FF FF 87 19 00 00 00 FF 00 FF B7 1A 00 00 48 E5 FF FF B7 1A 00 00 00 FF 00 FF 88 19 00 00 77 E6 FF FF 88 19 00 00 00 FF 00 FF 4C D2 3. Change to Mifare Type Card Test Method by Command Line. /POLLFORTOKENTYPE=MIFARE --> indicatee Mifare Test Method. 4. Initial Version. 5. Script File Example TransArmour_TxRx - V01.txt