FAQ: 2DScan FX100
- 1 Q: Where can I find and download the user manual?
- 2 Q: How do I get rid of the "*" on both sides of the Code 39 barcode data output?
- 3 Q: How do I append a Tab at the end of the barcode output?
- 4 Q: I set the scanner to the factory default, it won't output the data in a text editor now. What should I do to get it back to work?
- 5 Q: How do I set the scanner to skip the "*" for Code 39 output (*12345 -> 12345"), and insert Space at the very end as a terminator (12345space12345)?
- 6 Q: I am using Excel, and when I scan my barcode it skips a line after the scan. How do I make it to the next line?
- 7 Q: How do I reset the IDBA-6641LRB USB keyboard emulation interface scanner default?
- 8 Q: How do I set the scanner to add an Enter at the end of the output for a USB/KBW interface scanner with Firmware Ver: 3.06.038?
Q: Where can I find and download the user manual?
Downloaded the user manual from our website.
Q: How do I get rid of the "*" on both sides of the Code 39 barcode data output?
A: To disable the output of the "*" for Code 39, scan the following barcode on Page 69 of the manual:
Code Programming ON
Transmit Neither "*" under Transmit Start & Stop Character section
Code Programming OFF
Test read the barcode to confirm the "*" characters are gone
Q: How do I append a Tab at the end of the barcode output?
A: To append a Tab at the end of the output, scan the following barcodes:
Code Programming ON (on page 126)
Enable User Suffix
Program User Suffix
0 (on page 137)
9 (on page 138)
Save (on page 139)
Code Programming OFF (on page 126)
Q: I set the scanner to the factory default, it won't output the data in a text editor now. What should I do to get it back to work?
A: Set the reader back to USB/Keyboard interface by scanning the following barcode on page 30:
Code Programming ON
Select USB HID-KBW
Code Programming OFF
Q: How do I set the scanner to skip the "*" for Code 39 output (*12345 -> 12345"), and insert Space at the very end as a terminator (12345space12345)?
A: Scan the following setup barcodes in sequence:
Code Programming On from any page of the manual
Transmit Neither "*" (on page 69)
Enable User Suffix (on page 126)
"2" & "0" (on page 137)
"Save" (on page 139)
Code Programming Off (from any page of the manual)
Q: I am using Excel, and when I scan my barcode it skips a line after the scan. How do I make it to the next line?
Please scan the following barcodes in sequence from the manual on page 126:
Scan the Code Programming ON
Enable Stop Suffix
Program Stop Suffix
Program Ox0D as Stop Suffix
Code Programming Off
Q: How do I reset the IDBA-6641LRB USB keyboard emulation interface scanner default?
A. Scan the following barcodes in sequence from the manual on page 23 to reset the scanner to the factory default first:
Code Programming ON
Load All Factory Default
Code Programming OFF
B. Scan the following barcode in sequence on page 30 to set it to USB/Keyboard emulation interface:
Code Programming ON
Select USB HID-KBW
Code Programming OFF
Q: How do I set the scanner to add an Enter at the end of the output for a USB/KBW interface scanner with Firmware Ver: 3.06.038?
A. Please scan the following barcodes:
Code Programming ON (on page 127)
Enable Terminal
Program 0x0D as Terminal
Code Programming OFF (on page 127)
Note: Units with Firmware Ver: 3.06.026 add Enter by default.
See also:
