Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

please run the following commands 

  1. enable passthrough mode command (2c-01) with data 01
  2. LED control command (0a-02) with data FF01
  3. Are the 4 LEDs on? if not, the LED(s) is(are) broken 
  4. Buzzer control command (0b-01) with data 03
  5. Are your hearing 3 short beeps? if not, the buzzer is broken.
  6. disable passthrough mode command (2c-01) with data 00

 

  • No labels