CP210x_Universal_Windows_Driver.zip

27 Aug 2018 goofy.liu

USB-CDC Driver.

usb → Comport.

Default baudrate: 115200

BLEChipset_50002542A(BM71Userguide).pdf

09 Nov 2018 goofy.liu

Doc Version, 2014-09-12

p159, Fig 2-50

-Rev 50

-C03.zip

25 Dec 2018 goofy.liu

• 1.No Antenna Setting Version since 90-00 side-effect being not confirmed yet.
• 2.Improved ClassUSBDev UI Event (61-01) Capability.

steven.chen

F/W ver.: VP3310 FW v1.00.000.0234.S

SHA-512:

735840A8A6A1A3F2726BB9D3C2776DF806F706FA110CF2CF800BCDA5CA9E51B34A80F5096FEFC401EB2C41F0D793C635D9E3148E1F9F663C3B754EC56BA2F878

-C02.zip

25 Dec 2018 goofy.liu

1. Improved Tamper Test.

Add Reconnection Process between 90-02 Response And GetDRS(C7-3D,Tamper Status).

This is for case of UUT rebooting during 90-02 process.

Note01:

  Antenna Parameter Setting is Never reset after PKI process,

=========================================

V1.00.006-C01, 2018 Dec 20, goofy_liu

1. Improved BLE Test.

Always Push [Reset] Button at the beginning of BLE test.

-C02.zip

12 Dec 2018 goofy.liu

• 1.Fixed Message @ BLE Test :

   old: 119200

   new: 115200

• 2.Fixed DPC PN5180 set/get/check issue , define "??" ignored compare value

 in CustCfg.xml file.

   old: <cust_cmd002 set="1">0_CMD_F801_TX_020000_RX_02010107204E05000100F972014601500100_END_TM_QC</cust_cmd002>

   new: <cust_cmd002 set="1">0_CMD_F801_TX_020000_RX_02010107204E05000100F9720146015001??_END_TM_QC</cust_cmd002>

*Note01, Hardware Tony reported that PN5180 DPC parameter "Current Gear" could be ignored.

RE TS187_VP3310 V1.00.005-C01 Released + PN5180 parameter settings..msg

-C01.zip

11 Dec 2018 goofy.liu

• 1. Improved BLE test senario.

• 2. Label's BLE Address Information..

 2.1 Rename 99_Output\BLE_xxx.txt extension name.

  old : filename.txt

  new : filename.cvs

 2.2 Add 1st line as..

  The 1st line will be ignored during barcode Label production.

   "<Serial Number>,<BLE Adv Address>,<*Duplicated Adv Addr01>-<*Addr02>..."

 2.3 After every 5 lines rendered, the TS performs sorting of the S/N-BLE Address collection w/ the key=S/N.

• 3. Antenna PN5180 Parameter Setting
  e-mail: RE VP3310 antenna 參數設定變更.msg

3.1 P/N Scope,

IDMR-PBT71; IDMR-PBT71D;

3.2 -<Set Commands>-

Type A:  F8-00 + data: 0100008207000050230000170000000000000043CFDB0010000000F00108004B80000000000000DC4004001E000000

Type B: F8-00 + data: 0101008E00000000000000000000000000000056473A0010000000F00108000B4600000000000015461F001A000000

DPC: F8-00 + data: 02010107204E05000100F972014601500100

3.3 -<Get Commands>-

Type A:  F8-01 + data: 010000

Type B: F8-01 + data: 010100

DPC: F8-01 + data: 020101, the following figure shows DPC value.

3.4 PN5180 Config Tool

LabSDK_EMVL1_V1.00.019.zip

3.5 EMV L1 Commands, for PN5180

EMV Contact & Contactless L1 Debug Tool Specification V1.15 (2).docx

NoICC-C03.zip

-C03.zip

13 Nov 2018 goofy.liu

1.Improved BLE Connection Test Stablility.

To Add Pairing Key Response Waiting time

old: 4 seconds

new: 8 seconds

2.[Production Mode]

Add (Serial Number,BLE Address-6 chars/digits, *duplicated addresses) info and output to "99_Output" sub-folder's

txt file.

--< SN+BLE Address Output Text File Make Procedure >--

Step 01 - Run BLE Test (A) & Passed (Color Lime), mandatory

Step 02 - Serial Number (B) Test Passed (Color Lime), mandatory. 

Step 02 save Serial Number+ BLE Address information.

Step 03 - Right-Click BLE Test Button (A) to open the sub-folder (C,99_Output) which contains serialNum - BLEAddress information.

Step 04 - To select the information file. File Name = VP3310_SN_BLEAddr_<Part Number>_yyyy-mm-dd.txt & text editor to open it. (D)

Here is an example text file.

VP3310_SN_BLEAddr_IDMR-PBT71_2018-11-14.txt

Step 05 - Each row contains "843T229525,3481F43B12E6,...." = "Serial Number, BLE Address, * duplicated / deprecated BLE Address(es)"

see (E), = (Serial Number, BLE Address) and (F), = (*optional, duplicated BLE Addresses).

3.Fixed BLE Address Output Format Issue.

BLE Address-Old : E6123BF48134, Little-Endian & Incorrect value to user.

BLE Address-New : 3481F43B12E6

12 Nov 2018 goofy.liu

1.Move BLE Test to the 1st item @ Production & QC Modes.

12 Nov 2018 goofy.liu

1.Move BLE Test to the 1st item @ Production & QC Modes.

-C01.zip

09 Nov 2018 goofy.liu

• 1.Add Serial Number, BLE Address output to the folder [99_Output]
• 2.Set Default BLE Pairing Key = "654321" &

Friendly Name = "VP3310-XXXXX"

where "XXXXX" = the last 5 chars of serial number.

Ex:  S/N = 842T225492 ==> "VP3310-25492"

• 3. P/N Updated

(+) = Added; (-) = Removed;

(+) IDMR-PBT71

(+) IDMR-PBT71D

(-) IDMR-PBT70100TEBD

C01.zip

30 Oct 2018 goofy.liu

• 1.Fixed BLE Address Test problem.

S/N check --> FW Check since S/N Empty in Production Line.

• 2.+ICC Test.

NoICC-C01.zip

30 Oct 2018 goofy.liu

• 1.Fixed BLE Address Test problem.

S/N check --> FW Check since S/N Empty in Production Line.

• 2.No ICC Test since PCB problem.

-C03.zip

25 Oct 2018 goofy.liu

• 1.Temporarily Removed ICC Test since PCB board problem.

This is DA version.

-C02.zip

19 Oct 2018 goofy.liu

• 1.Add Push [Reset] Button in QC mode startup.

Remember that must waiting “Green LED ON” then push [OK] to next step.

• 2.QC mode BLE Test update.
• 3.Add Friendly Name as “VP3310-5 digits of S/N”

Ex: “VP3310-01234”

• 4. Add BLE Firmware Info Check

Ex:

[BLE Module Fw Info] = 01 06 01 01

Silicon Type Idx : BM71

--<To Do, Next Release>--

1.Output S/N,BLE Address in cvs file format. To allow PE to printout QR code after Production mode PASSed.

file name = SN-BLEAddr.cvs

2.Setup BLE Pairing PIN overwhelming the default PIN. TS V 1.00.002-C02 sets up the UUT w/o PIN.

Note: default PIN is not allowed used since PCI definitions.

RE VP3310TS187 V1.00.002-C02 Released.msg

19 Oct 2018 Mindy Yang

-C03

30 Aug 2018 goofy.liu

• 1.[Bluetooth,BLE] Add Retry in BLE Jig Communication.

FW 0192.SRED

-C02

28 Aug 2018 goofy.liu

• 1.Update LEDs+Buzzer Test.
• 2.Update BLE Test Info.

FW 0182.SRED

-C01

27 Aug 2018 goofy.liu

Product Name: VP3310 , Bluetooth.

1.Initial Version

PCI SRED Production, NEO 2.0 platform

2.+ P/N

IDMR-PBT70100TEBD,

  VP3310, Demo Version

  a.Installed IDT Standard Certificates.

  b.Injected Keys : LCL-KEK; DEK; PEK;