Features & Notes
Bluetooth Jig/Fixture USB-CDC Driver, made by shanghai team.
Item | Driver | Comments |
---|---|---|
Documents
BLE Chip User Guides
Doc | Comment |
---|---|
Test Instruction
Version | Comment |
---|---|
To Do List
1.QC mode reset button push check.
2.BLE Friendly Name + Password setting.
3.Printout S/N + BLE Address in cvs file. to allow Factory to print out QR code label.
Download List
Version | Update Info & Comments | Approved by |
---|---|---|
V 1.00.004 | ||
1.Improved BLE Connection Test Stablility. To Add Pairing Key Response Waiting time old: 4 seconds new: 8 seconds 2.[Production Mode] Add (Serial Number,BLE Address-6 chars/digits, *duplicated addresses) info and output to "99_Output" sub-folder's txt file. --< Procedure >-- Step 01 - Run BLE Test (A) & Passed (Color Lime), mandatory Step 02 - Serial Number (B) Test Passed (Color Lime), mandatory. Step 02 save Serial Number+ BLE Address information. Step 03 - Right-Click BLE Test Button (A) to open the sub-folder (C,99_Output) which contains serialNum - BLEAddress information. Step 04 - Seletec the information file. File Name = VP3310_SN_BLEAddr_<Part Number>_yyyy-mm-dd.txt & text editor to open it. (D) Here is an example text file. VP3310_SN_BLEAddr_IDMR-PBT71D_2018-11-13.txt Step 05 - Every row contains "843T229525,BD0B3BF48134,...." = "Serial Number, BLE Address, * duplicated / deprecated BLE Address(es)" see (E), = (Serail Number, BLE Address) and (F), = (*optional, duplicated BLE Addresses). | ||
-C02.zip | 1.Move BLE Test to the 1st item @ Production & QC Modes. | |
NoICC-C02.zip | 1.Move BLE Test to the 1st item @ Production & QC Modes. | |
Friendly Name = "VP3310-XXXXX" where "XXXXX" = the last 5 chars of serial number. Ex: S/N = 842T225492 ==> "VP3310-25492"
(+) = Added; (-) = Removed; (+) IDMR-PBT71 (+) IDMR-PBT71D (-) IDMR-PBT70100TEBD | ||
V 1.00.003 | ||
S/N check --> FW Check since S/N Empty in Production Line.
| ||
S/N check --> FW Check since S/N Empty in Production Line.
| ||
V 1.00.002 | ||
Remember that must waiting “Green LED ON” then push [OK] to next step.
Ex: “VP3310-01234”
Ex: [BLE Module Fw Info] = 01 06 01 01 Silicon Type Idx : BM71 --<To Do, Next Release>-- 1.Output S/N,BLE Address in cvs file format. To allow PE to printout QR code after Production mode PASSed. file name = SN-BLEAddr.cvs 2.Setup BLE Pairing PIN overwhelming the default PIN. TS V 1.00.002-C02 sets up the UUT w/o PIN. Note: default PIN is not allowed used since PCI definitions. | ||
V 1.00.001 | ||
Product Name: VP3310 , Bluetooth. 1.Initial Version PCI SRED Production, NEO 2.0 platform 2.+ P/N IDMR-PBT70100TEBD, VP3310, Demo Version a.Installed IDT Standard Certificates. b.Injected Keys : LCL-KEK; DEK; PEK; |