Date Posted | Revision | File | Release Note |
---|---|---|---|
2018/01/25 | 1.57 | Add section to describe Apple VAS & SmartTap 2.1 in Auto Poll Update Table 4 Configuration and Mode Matrix | |
2017/11/23 | 1.50 | Update DFEE26: follow 80000404-00 & 80000403-001 | |
2017/11/22 | 1.49 | Remove Note to TransArmor 3DES-DUKPT about tag DFEF4B; Add MSR Equivalent Data Function: Update byte 2 for TransArmor 3DES-DUKPT | |
2017/11/22 | 1.48 | Add Note to TransArmor 3DES-DUKPT about tag DFEF4B | |
2017/11/13 | 1.47 |
| |
2017/11/11 | 1.46 |
| |
2017/11/10 | 1.45 |
| |
2017/11/08 | 1.44 | Update 2C-02 command | |
2017/10/17 | 1.43 | Add Appendix M –Default Transaction Type for Contactless | |
2017/10/11 | 1.42 |
| |
2017/10/06 | 1.41 |
| |
2017/10/03 | 1.40 |
| |
2017/09/28 | 1.39 |
| |
2017/09/14 | 1.38 |
| |
2017/09/11 | 1.37 |
| |
2017/08/17 | 1.36 | 1. Update Appendix J | |
2017/08/02 | 1.35 |
| |
2017/07/21 | 1.34 |
| |
2017/05/08 | 1.33 |
| |
2017/04/28 | 1.32 |
| |
2017/03/30 | 1.31 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx |
|
2017/03/30 | 1.30 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.30.docx |
|
2017/03/21 | 1.29 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.29.docx |
|
2017/02/24 | 1.28 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.28.docx |
MSR format: w/o track length byte Contact KSN tag from DFEE12 to FFEE12
Get BLE Address(30-10) Get Friendly Name of BLE(30-11) Set Friendly Name of BLE(30-12) |
2017/02/18 | 1.27 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.27.docx | 1. Update Appendix L of config 5C and master key behavior for TTK. |
2017/02/02 | 1.26 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.26_draft.docx |
|
2017/01/19 | 1.25 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.25.docx |
|
2016/12/21 | 1.24 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.24.docx | Update Appendix B Support Tag DFEF1F for auto-authentication Add Tag DF34 for TTK FW Version |
2016/12/19 | 1.23 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.23_draft.docx | Update command: 01-01/ 60-06/ Add Command: 01-07/ 01-08/ 01-09/ 01-0A Add Quick-Chip Mode |
2016/12/08 | 1.22 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.22.docx |
|
2016/12/06 | 1.21 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx |
|
2016/11/30 | v1.20 | NEO IDG for UniPay III and UniPay 1.5 v1.20.docx | 1 Update some content that refer to NEO IDG_Rev 100: 1.1 02-40 1.2 03-00/ 03-40 1.3 09-01 1.4 29-06/ 29-07/ 29-08/ 29-09/ 29-17 1.5 30-03 1.6 60-10~60-0F 1.7 60-14 ~ 60-16 1.8 61-01/ 61-02/ 61-03 1.9 C7-36/ C7-37 1.10 F0-00/ F0-01/ F0-02/ F0-0F 1.11 2C-12/ 2C-13/ 2C-18 2 Correct: 2.1 Data length of command frame of C7-36 to 1 byte 2.2 Data length of response frame of C7-37 to 1 byte 3 Update appendix J: add power saving for Goose Run 4 Add appendix J to explain about encryption of Apple VAS and Android pay 5 Update appendix K to record the behavior between burst mode and encryption 6 TTK not support force encryption 7 Add DF4A for MSR response output format for TTK 8 Add DF4D for contact response output format for TTK |
2016/10/27 | v1.19 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.19.docx |
|
2016/10/26 | v1.18 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.18.docx | 1.Update Command 09-01, 09-14 |
2016/09/19 | v1.17 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.17.docx |
|
2016/09/19 | v1.16 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.16.docx |
|
2016/08/30 | v1.15 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.15.docx |
|
2016/08/16 | v1.14 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.14.docx | Tags 9A/9F21 should be mandatory for UniPay reader transactions, since the RTC power will be cut-off while reader into power-off mode. |
2016/08/11 | v1.13 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.13.docx |
|
2016/06/30 | v1.12 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.12.docx | Update the definitions of “Attribution Byte” and TagDFEE26 to latest specification version. |
2016/06/21 | v1.11 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.11.docx |
|
2016/06/20 | v1.10 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.10.docx |
|
2016/06/19 | v1.09a | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.09a.docx |
|
2016/06/02 | v1.09 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.09.docx |
|
2016/05/27 | v1.08 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.08.docx |
|
2016/05/27 | v1.07 | NEO IDG Supplement for UniPay III and UniPay 1.5 v1.07.docx |
|
2016/04/15 | v1.06 | NEO IDG Supplement for UniPay III v1.06.docx |
|
2016/03/25 | V1.05 | NEO IDG Supplement for UniPay III v1.05.docx |
|
2016/02/26 | V1.04 | NEO IDG Supplement for UniPay III v1.04.docx |
|
2016/02/17 | V1.03 | NEO IDG Supplement for UniPay III v1 03.docx | 1. Update document name. 2. Update Contactless Output Format Table 3. Update Contact Output Format Table 4. Update MSR Output Format Table 5. Update Contact Set Certification Revocation List 6. Command F0-F4, F0-F5 not support 7. Update command 30-01 8. Add LED behavior |
2016/01/22 | V1.02 | UnipayIII - Configuration and Parse Methods v02_TW.docx |
|
2016/01/21 | V1.01 | UnipayIII - Configuration and Parse Methods v01_TW.docx | New Release |
Manage space
Manage content
Integrations