...

You can also look at the KSN (key serial number). This 10 Byte hex number is always available in plain text with any encrypted data. If the KSN begins with 629949, then it is a key ID TECH created and very likely injected into your reader. You can let us know the KSN and we can share what can be learned from it. Also, we can look up the readers sales history using the serial number on the reader. Often we can track down the sales invoice that may include key injection service that specifies the key to be injected

Can the customer inject the encryption key by themselves?

What's the structure of a KSN?

Refer to TS-1938

How to tell if the Augusta has an encryption key injected and how to activate the encryption with the key pre-injected?

Refer to TS-1938 & TS-9219

Image Added

Can you show me how to decrypt the encrypted data or provide the decryption Dll used by your Demo?

Do you provide the key generating service?

Can SecuRED and SREDKey be remotely key injected?

No, as of now. 

What's the key press sequence to put the SREDKey into the KeyInjection mode?

" # Cancel  BS  Cancel  Enter  #" within 5 seconds after the device powered up with Ready displayed (for SREDKey) Refer to TS-5821

Which IDTECH products support multiple key slots? 

refer to TS-6213

What's the key injection protocol and converter cable for Augusta?

Refer to TS-7474.

Augusta takes the following settings (and needs the 007 converter)

• 9600 Baud
• 8 data bits
• N parity
   
  Firmware version of your HSM will need to support IDTECH NGA protocol.  And a LCL KEK must be created for the 3rd party key injection party to be able to inject our Augusta

What is LCLKEK, KTK and how a LCLKEK can be securely transferred to a 3rd party KIF(Key Injection Facility)?

Refer to TS-7936 

For K100,  Is there a way to check whether a unit has the Production LCLKEK or the Demo LCLKEK loaded? If yes, how to do so?

Refer to TS-8585

You can use command "Get Key status"(78 46 25) to get the key status with uDemo

Where can I find out the correct key injection cable and protocol for injecting an IDTECH product (Internal Only)?

Spreadsheet in the Key Management folder on the Snap server

What a transferred key look like? (Internal)

Here is a test key transfer key parts: (from TS-9209)

Key Value: 95036100
KCV (entire Key): E45B50

Key Component: 1 of 2
Check Digit: 3218A6
Key Component: F2D53475FBAE1C3BDCFE9DDCBC23E96B

Key Component: 2 of 2
Check Digit: 8F9627
Key Component: 1AA1B5676BF243736B45DF9840B5A8B3

Related Articles:

...