Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 156 Next »


Target Project

VP3300 Bluetooth, 2017

<Legacy> BTPay - Mini, 2016

Inherited from UniPay III

  • (minus) No Audio Jack
  • (plus) Add Blue tooth Low Energy Module , SPS protocol type

Mobile App DL Link


TI - 80149207

RevisionDateDescriptionApproved by

 

Rev E,

Renew this Rev since the Arena BOM's Rev D being modified by

PJM Kenneth.


 

Rev E, Signed

 

  • 1.TQM Test Supported

1.a RFID Test; 1.b ICC Test

  • 2.QC mode – Test Result Summary Log Information
  • 3.Update ICC Test Card.

Rev C

 

1.Rename

old: VP3300

new: VP3300 Bluetooth

80149207-TI-Rev C.docx


Rev B

 

1.Rename All "BTPay, Mini" portion

to "VP3300"

80149207-TI-Rev B.docx


Rev 50

 


VP3300 Bluetooth (Legacy: BTPay-Mini) Firmware Web Page

F/W Release Page


TS Fixed JIRA

TE-246 - Getting issue details... STATUS



Jason Files

DatePart Number.Json

 

IDMR-BT93933P-C3

CFG-CLEAR01-01-0.json





DL Link

VersionDateComment

Approved by Who
w/ FW Version (Web Link)


Part Number List Updated

V 2.02.004


Jira Ticket: TE-1113

 

goofy.liu 

  • 1. BT Chip Info String Updated
      Native= 2nd kind: BTM008R, IDTECH_Port-v0.005, BTC
      New   = 2nd kind: BTM008R, IDTECH_Port-v0.005, Avnet
  • 2.Added BT Chip Firmware Info Check in Test Item "FWInfo"
       1st BT Chip Model Number List, 1st kind : BTM002R, Enzytek
        ID-80149008-001
        ID-80149008-002    
        IDMR-BT73100W      
        IDMR-BT93133
        IDMR-BT93133A      
        IDMR-BT93133AP     
        IDMR-BT93133AP2
        IDMR-BT93133AP2D   
        IDMR-BT93133APW    
        IDMR-BT93133APW-L1
        IDMR-BT93133APW2   
        IDMR-BT93133AW     
        IDMR-BT93133N
        IDMR-BT93133NW     
        IDMR-BT93133P      
        IDMR-BT93133P-U1
        IDMR-BT93133P2     
        IDMR-BT93133P2D    
        IDMR-BT93133PW
        IDMR-BT93133PW2    
        IDMR-BT93133PW2-F1 
        IDMR-BT93133W
        IDMR-BT93233PW2    
        IDMR-BT93933P-C1   
        IDMR-BT93933P-C2
        IDMR-BT93933P-C3   
        IDMR-BT93933P-C4   
        IDMR-BT93933PC2-P1
        IDMR?BT93133P-E1      
       
       2nd BT Chip Model Number List, 2nd kind : BTM008R, Avnet
         Note01: New key word "V" stamped for 2nd kind BT Chip.

     Note02: These Model Numbers are NEW Added !!
    IDMR-BT93133PV
    IDMR-BT93133PV2
    IDMR-BT93133PV2D
    IDMR-BT93133PWV
    IDMR-BT93133PWV2
    IDMR-BT93133APV
    IDMR-BT93133APV2
    IDMR-BT93133APWV
    IDMR-BT93133APWV2
    IDMR-BT93133APV2D

----------------  Error : Reader's BT Chip info can't meet current Model Number's criteria ---------------

case 01 : using 1st kind BT reader to run TS w/ 2nd kind model number.

case 02 : vice versa.

Git Hash = 626fb3216911ae0012f38d30a3a3f850fa3456b5

V 2.02.003


TE-1077

 

goofy.liu 

  •  1.Added BT Chip Firmware Info
       -Update Display Message, UI Top Label(StatusStrip Label)
          BT = 1st kind : BTM002R
          BT = 2nd kind : BTM008R
       - 1st Test Unit Confirm Information, here is an example...
        Legacy = 1st kind: BTM002R, IDTECH_Port-v1.028, Enzytek
        New    = 2nd kind: BTM008R, IDTECH_Port-v0.005, BTC


  •  2.New Test Item Added : Reset
       - Device Reset : Production Mode ONLY, 
       - IDG Command: Reset to Default(04-F0)



V 2.02.002


TE-1007

 

goofy.liu 

1.BLE Test Wrong BT MAC Address Issue.

  - Fixed , Retrying 30-10 2+ times to get correct BT MAC Address.

  - Old & New BT Chips, both of them are *ALL* compatible in TS.

  - BT MAC Format List

  Old Prefix = 001C*, 001C97154B0A, Legacy V01, Enzytek,

  New Prefix = 60C0*, 60C0BF25C96C, V02, Avnet


******* Firmware Known Issue **********

 30-10 Get BT MAC Address sometimes will provide BT Chip FW Version or Friendly Name in Random.

 Workaround = TS sends 30-10 2+ times to get correct BT MAC by Vendor's MAC prefixing

DUT Info:

[FWInfo] 

 VP3300 Bluetooth NEO v1.10.045

BL Version = VP3300 Bluetooth-BL-V3.10.003

[BLE Module Frmw Info] = IDTECH_Port-v0.005, BT Chip vendor: Avnet

2022 Jan 07


 

goofy.liu

1.BLE Test.

 - Removed BT MAC Addr's Prefix Filter of Enzytek's

   old: "001C97154B29" --> "001C*"

Also this is for new BT Chip Vendor Avnet.com !


V 2.02.001


SQA Test Req JIRA Tkt.
TE-934

 

goofy.liu

  • 1.P/N List Updated
    [+] IDMR-BT93133PW2-F1:TDES, MSR/MSD ON, EMV ON; json file support
      CFG-FORTI01-01-0.json, FW:VP3300 Bluetooth NEO v1.10.031_USBHID
    [M] IDMR-BT93933P-C3: Json file Support
      CFG-CLEAR01-01-0_D2A8C3.json , FW:VP3300 Bluetooth NEO v1.01.192


  • 2. External Json File Loading Tool - UpdateIDT.exe , powered by Randy , lead-in.

*Note:

Please execute the TS166 from the server (ex: rd-fileserver) in the Test PC.
You may meet the warning dialog box during invoking those .exe files from server side (network path).

Please click Yes/Execute Button to continue...



Executing UTS from the remote side (LAN server, ) example.
ex: Using "rd-fileserver" ,  Taoyuan RD Office, IDT.

The Windows will prompt the warning dialog box (the upper Fig.) before External App01 and App02 execution.



V 2.01.004


SQA Test Req Ticket:

TE-693 - Getting issue details... STATUS

TE-539 - Getting issue details... STATUS


 

goofy.liu

  • 1.P/N List Updated

+ IDMR-BT93933PC2-P1:TDES, MSR/MSD ON, EMV ON


 

goofy.liu

  • 1.Fixed Issues

Repeated [Backspace] key-down to delete input P/N text until empty at round 2+

will cause P/N auto-selection failed.


 

goofy.liu

  • 1.Fixed Issues

P/N input typing reached full matched P/N, 

then it should automatically select right one in the list box.

Ctrl+A --> Del --> No Auto Selection & ListBox Selection problem.


 

goofy.liu

  • 1.P/N Input Typing Automatic match Issue
  • 2.[RFID Test] Improvement.

Removal Card Waiting Period Fine-tune.


 

goofy.liu

  • 1.Test Items Update
    [+] ICC Card Seat Test
  • 2. Admin Key Injection - KSN naming rule update
    old: LID/SID = 0/0
    new: LID/SID = from registry value
    Checking database DUT test info entity, 
    folder: C:\AdminKInj
        
  • 3.Fixed Following Issue(s)
    3.1 if P/N isn't typing until full matched 
    --> Press "Connect"
    --> TS crashed.
     
  • 4.[QC Mode] [FWInfo]
    [+] KSN value info prefix check
    description:
    [Secured Keys & KSN Info] = LCL-KEK(02), KSN = "FFFFFF0C45" 1234567890
    DUKPT/Data Key(05), KSN = "FFFFFF0245" 1234567890
    note01: 
    the 1st half (10-digit,left) pattern  : it's used to be checked. (ex: "FFFFFF0C45")
    the 2nd half (10-digit,right) pattern : 1234567890 is ignored (variant per DUT)

V 2.01.003




 

goofy.liu

1.RFID Test Updated , Type A+Type B : 0cm+4cm Tests

Objective - TQM-Visa Request : 0cm+4cm && CL Type A+B , 4-step items required.


Test Requested Ticket : TE-427 - Getting issue details... STATUS


V 2.01.002




 

goofy.liu

  • 1. P/N List Updated

[+] IDMR-BT93133AP2D: AES, MSR/MSD ON, EMV ON Demo RKI-KEK, Demo DEK

Requested e-mail: FW ECN-008643.msg


  • 2. RTC Test @ QC mode (Already patched in V2.01.001-C01)

old: start QC mode --> FWInfo --> several test items passed --> RTC check --> certain (S/N check) --> Done.

new: start QC mode --> FWInfo --> RTC Set/Check --> several test items passed --> RTC check --> certain (S/N check) --> Done.


TE-410 - Getting issue details... STATUS

 

goofy.liu

  • 1.P/N List Updated

[+] IDMR-BT93133P-U1: TDES, MSR/MSD ON, EMV ON

[+] IDMR-BT93933P-C3,

old: [-] Buzzer Test,

new: [+] Buzzer Test, Added


  • 2.Conditional UI Items Testing, depending on 01-05 setting

Ex01: UI-LED Source = External --> Inform the operator at 1st time & pass LED test.

Ex02: UI-Buzzer Source = Internal --> Normal Buzzer Test.

2.1 Note: Reconnecting the DUT will renew the UI Source Information.

2.2 Effected UI Test Item list Scope : LED/LCD/Buzzer


Tips01 P/N Input : keyword typing to haste the P/N item seeking...


JIRA-TE :  TE-409 - Getting issue details... STATUS

V 2.01.001




 

goofy.liu

  • 1.P/N List Updated

[+] IDMR-BT93133APW2: AES, MSR/MSD ON, EMV ON

[+] IDMR-BT93133P2D: TDES, MSR/MSD ON, EMV ON; Demo RKI-KEK, Demo DEK


 

goofy.liu

  • 1.P/N List Updated

      [+]IDMR-BT93133APW-L1:AES, MSR/MSD ON, EMV ON

 

goofy.liu

  • 1.P/N List Updated

IDMR-BT93933P-C3 :

old: json file support.

No Buzzer Test.

new: No Buzzer Test.

<noted>

(a) No more supporting json file supports since VivoConfig Tool

takes care the json file loading job.

(b) No Beep function depending on Json file configuration.

Operators could check Buzzer Beeps on [BLE Conn Test] Rebooting step.


 

goofy.liu

1.P/N List Updated

IDMR-BT93933P-C3 : + json file support, No Buzzer Test.

No Buzzer Test Since Json file configuration.

If you still wanna check the buzzer status, you could verify it during Bluetooth Test Connection (Ping + 1 Beep).

---

1.ViVO Config Tool: ViVOConfig_Setup.msi

2.ViVO Config Tool - MFG Version : ViVOConfig_MFG.zip

The MFG version needs the network UNC path access right

"\\192.168.1.26\DocumentControl\ViVOconfig.MFG"

account: its\servicecenter

pwd: scenter

3. The new json file for IDMR-BT93933P-C3 : CFG-CLEAR01-01-0.json

If update the ViVO Config Tool from time to time.



V 2.00.009




 

goofy.liu

  • 1.P/N List Updated.
    (plus)IDMR-BT93133P2, TDES, MSR/MSD ON, EMV ON

      (plus)IDMR-BT93133AP2, AES, MSR/MSD ON, EMV ON

      (plus)IDMR-BT93133PW2, TDES, MSR/MSD ON, EMV ON

  • 2.Summary Log Function being Supported
    path=(.\Logs\Summary\XXX.log)

Example: Summary-202061-IDVP-12P2_TM.log

  • 3.Disable - Summary Log Shows Up Automatically
    old: Auto Pops up Summary Log after ALL Test Items Passed.
    new: Manually open Summary Log File by Mouse Right-Clicking Test Window's Top Tab (Production Mode/QC Mode/QC-US mode)


  • 4.New ICC Test Card
    old: Type I + Type II
    new: New ICC Test Card

V 2.00.008




 

goofy.liu

  • 1.P/N List Updated

(+)ID-80149008-002 : TDES, Encryption MSR/MSD ON; EMV ON

SHA-512: F5F4D335CD93B8642FBC87FB7A4E15EBD2C6F743108B5007AD19A9BBABB17EDEF091D7486FB93411B964AAC6731F393DB7B7124B70B60EF9D0E7C495CCF16194

 

goofy.liu

  • 1.TQM Test Requirement Added - ICC Test Parts

1.a) Abbreviation:

ICC Card - Type 01 = CLXSU004J4/T=0

ICC Card - Type 02 = CLXSU064KCS/T=0ED

1.b) Test Scenario:

We have use both of Types (01+02) for ICC Test. Let's see as the following steps.

old:

  Insert Type 02 --> Remove Type 02 --> Done.

new:

  Insert Type 01 --> Remove Type 01 --> Insert Type 02 --> Remove Type 02 --> Done.

 

 goofy.liu

  • 1.P/N List Updated

(+)IDMR-BT93133P-E1: TDES, MSR ON, EMV ON

  • 2.Add TQM(MCL) Tests

2.A RFID = 0cm+4cm
2.B ICC = Add APDU Test for Data I/O PIN Test.
To be noted that there are 2 kinds of IDTech ICC Cards (CardLogix).
Type 01 : CLXSU004J4/T=0;
Type 02 : CLXSU064KCS/T=0ED;
To use "Type 01" instead of "Type 02" in ICC Test otherwise it

<Type 01>

< Type 02 >


always comes with failure in APDU talk steps.
ICC Test Detail Information, please visit the URL : TQM-ICC Test Improvement

V 2.00.007

 


N List Updated

1.ID-80149008-001 : TDES, Encryption MSR/MSD ON; EMV ON

[X] LEDs Test Item (Power,Tri-Color), Removed.

<White housing>

2.IDMR-BT73100W: TDES;MSR ON;EMV OFF; NO MSR

3.IDMR-BT93133W

4.IDMR-BT93133PW: TDES, MSR ON, EMV ON

5.IDMR-BT93133NW: TDES, MSR OFF, EMV OFF

6.IDMR-BT93133APW: AES, MSR ON, EMV ON

7.IDMR-BT93133AW: AES, MSR ON, EMV OFF

<Black Housing>

8.IDMR-BT93133P: TDES, MSR ON, EMV ON

9.IDMR-BT93133N: TDES, MSR OFF, EMV OFF

10.IDMR-BT93133AP: AES, MSR ON, EMV ON

11.IDMR-BT93133A: AES, MSR ON, EMV OFF

12.IDMR-BT93133:  TDES;MSR ON, EMV OFF;

13.IDMR-BT93933P-C1: TDES, MSR ON, EMV ON

14.IDMR-BT93933P-C2: TDES, MSR ON, EMV ON

15.IDMR-BT93933P-C3: TDES, MSR ON, EMV ON

16.IDMR-BT93933P-C4: TDES, MSR ON, EMV ON

 

 goofy.liu

@P/N Updated

(+)IDMR-BT93933P-C2: TDES, MSR ON, EMV ON

(+)IDMR-BT93933P-C3: TDES, MSR ON, EMV ON

(+)IDMR-BT93933P-C4: TDES, MSR ON, EMV ON

Note01 : No Any Change in Software Source Code. New P/Ns Inherited from ALL Settings of "IDMR-BT93933P-C1".

SHA-512:

E147E02C4BCE6A817CC95BA434F7D334A647F24267D9CEA0F647DB978705C19FE438F8C1ABA144FC1B2813A2280553DACF5A19E0B4BF51F7400FB8517BD0B7EE
(Double-Click to Select All)

 

 goofy.liu

  • 1.Improved "S/N, BLE Address," output.
  • 2.+ P/N
  • IDMR-BT93133P-C1: TDES, MSR ON, EMV ON

Kate Hung 

RE TS166BTPayMini VP3300-BLE V2.00.007-C01 Released.msg

SHA-512:

112E991C89BE27A399DABED599F4D96731FB0E5929C2942BABE8DF0DB7A2BAD2BCD7C17EEF08FDA56331973F23634BD91E6CC9DD03A0AB0644BB23195E46FE5C

V 2.00.006




 

 goofy.liu

  • 1.Fixed Issues.

1.a QC Mode Friendly Name Setting Check Issues

1.b FW Info BLE FW Version Check Issues.

 

 goofy.liu

  • 1.Add S/N+BLE Address output.

Location : .\99_Output\VP3300BLE_SN_BLEAddr_Part Number_yyyy-mm-dd.txt

1.a Right-Click [BLE Test] to open the folder “99_Output”

1.b BLE Test passed à S/N Passed à TS generates (S/N,BLE Address) data in the text file.


ex: ".\99_Output\VP3300BLE_SN_BLEAddr_IDMR-BT93133A_2018-11-15.txt"

--<File Content>--

"123T456789,001C9714FD36,"

"123T456781,001C9714FD35,"

VP3300BLE_SN_BLEAddr_IDMR-BT93133A_2018-11-15.txt

  • 2.Support Zip / Unistalled / Local.txt method

V 2.00.005




 

 goofy.liu

  • 1.Part Number Update

Old: IDMR-BT93133PW-U1

New: ID-80149008-001

Settings:

TDES, Encryption MSR/MSD ON; EMV ON

[X] LEDs Test Item (Power,Tri-Color), Removed.

BLE Friendly Name : IDTECH-VP3300


V 2.00.004




 

 goofy.liu

  • 1.Update P/N List

 IDMR-BT93133PW-U1 : TDES;MSR and EMV encrypt on,

   + Excluded LEDs Test (Power, Tri-Color)

But it still performs RFID LEDs x 4 Test !!


 

 goofy.liu

  • 1.Update P/N List

 IDMR-BT93133PW-U1 : TDES;MSR and EMV encrypt on, + Excluded LEDs Test.


V 2.00.003




 

 goofy.liu

  • 1.+ P/N List

IDMR-BT93133PW-U1 : TDES;MSR and EMV encrypt on

IDMR-BT73100W :     TDES;MSR encrypt on and EMV encrypt off; no MSR

V 2.00.002





2017 Sept 13, goofy_liu

V 2.00.002-C01

1.New P/N are added.

White housing:

IDMR-BT93133PW: TDES, MSR ON, EMV ON

IDMR-BT93133NW: TDES, MSR OFF, EMV OFF

IDMR-BT93133APW: AES, MSR ON, EMV ON

IDMR-BT93133AW: AES, MSR ON, EMV OFF


Black Housing:

IDMR-BT93133P: TDES, MSR ON, EMV ON

IDMR-BT93133N: TDES, MSR OFF, EMV OFF

IDMR-BT93133AP: AES, MSR ON, EMV ON

IDMR-BT93133A: AES, MSR ON, EMV OFF

V 2.00.001





2017 Aug 1, goofy_liu

1.Rename Product is a Major Change.

TS Version V1.XX.XXX --> V2.XX.XXX

V 1.01.007





2017 July 31, goofy_liu

1.Rename USB_HID_IDTW.dll to USB_HID_IDTW_32bit.dll

2.Append the last 5~10 chars to the friendly name for

more precisely BLE reader identification.

Ex: old friendly name = IDTECH-VP3300

    new              = IDTECH-VP3300-23468

where S/N = 728T123468, XML file's frdly name = IDTECH-VP3300

3.Rename Keyword "VP3300" --> "VP3300Bluetooth" as reader ID.


V 1.01.006





2017 June 27, goofy_liu

1.Add P/N IDMR-BT93133.

Approved by Kate Hung

RE VP3300TS166 V 1.01.006-C03 Released.msg

FW: VP3300 NEO v1.01.047


2017 June 22, goofy_liu

1.Add Retrying Process while getting BLE Friendly Info.

V 1.01.006-C01


2017 June 22, goofy_liu

1.Rename TS Title :

Old  = BTPay-Mini

New = VP3300


2.Rename default BLE Friendly Name.

Old: "IDTECH-BTPay Mini"

New:  "VP3300".


3.Key Injection Tool - HW/FW Info Verification Keywords  Changed.

  V 1.10.004 Released,

 File Name: AdminKey_Injection.exe


4.BLE Test Fixture COM Port Selection, default baudrate being changed.

 Old = 2400

 New  = 9600



V 1.01.005-C02, 2017 May 02

1.Add Retrying Mechanism while getting BLE Module Version.

V 1.01.005-C01


V 1.01.005-C01, 2017 May 02

1.Add delay time after rebooting DUT behavior in BLE Test.



V 1.01.004-C01, 2017 April 24

1.Add BLE Module Frmw Version in FW Info Check Item.

see Red Line

----[ 1st DUT Firmware Data ]----

P/N =IDMR-BT93133W


===========================

[ProcessorType] = ARM Cortex-M4/ K21 Family

===========================

[Hardware Info] = HW,VPBTPay Mini

K21F Rev9

===========================

[FWInfo] = BTPAY MINI NEO v1.01.041

BTPAY_MINI-BL-V3.00.01

===========================

[BLE Module Frmw Info] = IDTECH_Port-v1.028

V 1.01.003-C01


V 1.01.003-C01, 2017 Mar 23

1.[Eng Mode] Adjust UI, Cursor movement to button center in Std Form


2.[Eng Mode] Add BLE Test Items in a group page.

for debugging.


3.BLE (Enzytek) Friendly Name Setting.

Value = "IDTECH-BTPay Mini"


4.Blue tooth test Item - Improved, get BLE Address from Reader by NEO Command.

[FWInfo] =

BTPAY MINI NEO v1.01.039

BTPAY_MINI-BL-V3.00.01



V 1.01.002-C02


1.Add Bluetooth device scanning function for user selection.

2.<TODO>

a) Get Bluetooth Address by issuing NEO Command

b) Add supported config settings for Bluetooth broadcast naming ID "Enzytek..." to

customized one (Ex: "IDTECH BTPay Mini").

SW = BTPAY MINI NEO v1.01.037;

BTPAY_MINI-BL-V3.00.01;


SQA = (question)

V 1.00.002-C01


V 1.01.002-C01, 2017 Feb 20

1.Improved BLE Test.

old = Using Enzytek Golden SPS PIO11 Pin to disconnect BLE

new = Using Data Mode Cmd "^^^<CR>" to disconnect BLE

<Info>

Data Mode = BLE Connected Status

AT Cmd Mode = BLE Disconnected Status

SW = BTPAY MINI NEO v1.01.037;

BTPAY_MINI-BL-V3.00.01;


SQA = (question)

V 1.01.001-C03


V 1.01.001-C03, 2017 Feb 10

1.Fixed Error Handler during Bluetooth communication

Timeout case ; Cancel action case;



V 1.01.001-C01


V 1.01.001-C01, 2017 Feb 10

1.Blue tooth Test Item Update.

Using Enzytek Golden SPS_C as Host's BLE Jig over RS232 Interface.


2.Display Encryption & DUKPT Info in QC Mode [FWInfo] Item

This is request from Greg, Cypress

Ex:

[Encryption-DUKPT Keys Info] = Encryption-Algorithm: TDES

Encryption - EMV: Disable

Encryption - MSR: Enable

Admin DUKPT Key : Valid

MAC DUKPT Key : N/A

Account DUKPT Key : Unused


3.Correct to one of P/N From

old: IDMR-BT90133W

new: IDMR-BT93133W


HW Test, V 1.00.001-C04


2016 Dec 28

  • For Hardware Test ONLY
  • No Beep Except Buzzer Test Item
  • HW Test Version UI (Engineer Mode Like)

V 1.00.001-C03


2016 Dec 21

1.Modify BLE Test Information


V 1.00.001-C02


1.Modify BLE Test Information

old : UniPay III Demo

new : UniPay III BLE SPS


V1.00.001-C01

Internal Test


2016 Dec 20

1.Initial Version

2.P/N- IDMR-BT90133W


V1.01.005-C99

Internal Test


Internal Test ONLY



Ref Doc / Materials

1.Blue tooth Test Topology

2.EnzyTek AT Commands for BLE Module (Server) & BLE Golden (Client)

Used AT Command Table, defined in EnzyTek SPS BLE Module User Guide V1.4.pdf

#AT Commands for Server / Client (*01)

Compatible Run Mode (*03)

A.Command Mode

 (BLE Disconnected)

B.Data Mode

 (BLE Connected)

Server(S) /

Client(C) Supported ?

Comment
01

Tx: AT+BLN?<0x0D>
Rx_OK:<0x0D><Friendly Name><0x0D>

Ex: <0x0D>Enzytek SPS_C<0x0D>

AS / CGet Friendly Name
02

Tx: AT+BLN=<Friendly Name><0x0D>

Ex: AT+BLN=IDTECH-BTPay Mini<0x0D>

Rx_OK: <0x0D>OK<0x0D>

AS / C

Set Friendly Name

(Production Mode ONLY in TS166)

(*02)

03

Tx: ATI4<0x0D>

Rx_OK: <0x0D><BLE Addr><0x0D>

Ex: 001C97121002<0x0D>

AS / CGet BLE Module Address
04

Tx: AT<0x0D>

Rx_OK: <0x0D>OK<0x0D>

AS / CClient / Server Alive Check
05

Tx: ATI0<0x0D>
Rx_OK: <0x0D>< information string ><0x0D>

Rx_OK_Example:
<0x0D>F-Serial_Port-v1.027_Golden<0x0D>

AS / CGet FW Version
06

Tx:^^^<0x0D>

Rx_OK: <0x0D>BLE DOWN<0x0D>

BC

Disconnect BLE Communication in

data mode.

*= Note

*01 : Server = BLE Module; Client = BLE Golden (i.e. Test Jig/Fixture)


*02 : Set Friendly Name in Server Side (BLE Module inside reader) will cause Blue tooth protocol restart

since broadcasting message contains Friendly Name.


*03 : Check BLE Module LED Indicator blinking behavior to know Reader's Blue tooth Connection Status

Disconnected Status = Slow Blinking, long period (LED ON)

Connected Status = Fast Blinking, short period (LED ON)



  • No labels