NEO IDG Supplement for VP3300(UniPay III, UniPay 1.5/TTK, Goose Run, BTPay mini)

Add section to describe Apple VAS & SmartTap 2.1 in Auto Poll

Remove Note to TransArmor 3DES-DUKPT about tag DFEF4B;

1. Support 77-05 command for all readers
2. Add tag 9F53 to contact default setting
3. Update the example of whitelist

1. Update white list format for supporting 16 digits
2. Update the example of white list

1. Add TransArmor session
2. Update C7-32 & C7-33 for TransArmor 3DES-DUKPT
3. Update Attribution Byte & DFEE26
4. Add white list command : 91-10, 91-11 & C7-A2

1. Add a section to descript “Apple VAS & SmartTap 2.1 in ACT command”
2. Update SmartTap 2.1: Merchant ID to Collector ID

1. Update Activate Transaction Command for Apple VAS and SmartTap 2.1 in ACT

1. Update configuration of tlvs of SmartTap 2.1

1. Update tags of SmartTap 2.1
2. Update Group 0

1. Move Quick Mode format to Appendix I
2. Add command 01-0A Change USB interface
3. Remove all the duplicate parts with NEO_IDG_Rev 115
4. According to NEO_IDG to redefine Global Configuration, Group 0, Group1 and Group 2

1. Update Activate Transaction : add flow to detect ICC and response

1. Update Command List: VP3300 Audio Jack and VP3300 Bluetooth support C7-2F.
2. Update all reader naming.

1. Update product naming.
2. Add the descriptions about process activate transaction and user insert CT card. Add A3h to Protocol 2 Status Codes
3. Add  Appendix J for Smart Tap 2.1.
4. Update QuickChip to deprecate.

1. Update QuickChip Mode:
   Add 2 configurations to QuickChip
   0x02: CL + CT + MSR enable
   0x03: CT + MSR enable
   0x04: CL + MSR enable
2. Update Appendix I – QuickChip Supplementary: remove test log of Goose Run
3. Remove example of 30-13 command
4. Update Table 6 Configuration and Mode Matrix: support BTpay mini
5. Update Figure 11 BTPay Mini State Diagram: remove any IDG CMD change status from power off to run.
6. Update L.4 Default Configuration: example of mask rule

1. Add Burst Mode and Figure 1: VENDI: Configuration/Mode Matrix

1. Update default value of DFEF5A.
2. Update default value of DF50

1. Update Command List Table:
   Unipay I_V_TTK do not support 30-03
2. Add CMD for BTpay mini
   Get FW version of BLE
3. Update QuickChip Mode format:
   Response of MSR
   Response of Contact
   Remove error code of Contact interface
   Add error code of Contactless interface
4. Add Group 20 to storing setting for ApplePay/VAS and SmartTap in QuickChip

1. Update MSR format of QuickChip.
2. Add a reboot command(77-05) for TTK

1. QuickChip:

MSR format: w/o track length byte

Contact KSN tag from DFEE12 to FFEE12

1. Add CMD for BTpay mini:

Get BLE Address(30-10)

Get Friendly Name of BLE(30-11)

1. Update Note of QuickChip Mode format section.
2. Update test log of Goose Run.

1. Add QuickChip Mode:
   1. Add QuickChip Mode format
   2. Add QuickChip mode setting to SetPollMode (01-01) CMD.
   3.  Add configuration 5C to Contact Set Terminal Data (60-06)
2. Update Power Management for BTPay Mini.
3. Update value of DFEF25 to 0x00
4. Update tags DF4C/ DF34/ DF4D/ DF4F in MSR and CT transaction response for TTK
5. Support configuration 5C for TTK
6. Update Table 27 for TTK

Update Appendix B

Support Tag DFEF1F for auto-authentication

Update command: 01-01/ 60-06/

Add Command: 01-07/ 01-08/ 01-09/ 01-0A

1.22

1. Add TTK fallback reason in Appendix B
2. Add DFEF52 in 60-06 tag list

1. Add Default Configuration of Appendix L
2. Update:
   Appendix E: default value of FFEE1D of TTK
   Appendix F: default value of FFEE1D of TTK
   Appendix H: LED display of MSR fallback

1 Update some content that refer to NEO IDG_Rev 100:

1.1 02-40

1.2 03-00/ 03-40

1.3 09-01

1.4 29-06/ 29-07/ 29-08/ 29-09/ 29-17

1.5 30-03

1.6 60-10~60-0F

1.7 60-14 ~ 60-16

1.8 61-01/ 61-02/ 61-03

1.9 C7-36/ C7-37

1.10 F0-00/ F0-01/ F0-02/ F0-0F

1.11 2C-12/ 2C-13/ 2C-18

2 Correct:

2.1 Data length of command frame of C7-36 to 1 byte

2.2 Data length of response frame of C7-37 to 1 byte

3 Update appendix J: add power saving for Goose Run

4 Add appendix J to explain about encryption of Apple VAS and Android pay

5 Update appendix K to record the behavior between burst mode and encryption

6 TTK not support force encryption

7 Add DF4A for MSR response output format for TTK

8 Add DF4D for contact response output format for TTK

1. Add TTK Command: C7-3A, C7-3B, C7-3C
2. Update All response output format for TTK
3. Add Appendix L for TTK Tag
4. Add Tag DFEF52

1. Update Appendix J
2. Add content of FFF7 for Goose Run
3. Add configuration for Goose Run
4. Remove Protocol 1 support for Goose Run in Command List

1. Add Power Off Notification

1. Update Commands List: support 02-01 for VP4880, VP4880 E and VP4880C.
2. Update Commands List: support protocol 1 commands for VP4880, VP4880 E and VP4880C.
3. Add appendix J for Encryption output of ApplePay VAS and AndroidPay
4. Update Commands List: support 02-01 for VP4880, VP4880 E and VP4880C

1. Add VP4880, VP4880E, VP4880C Mode
2. Add Fall back MSR command: 61-03
3. Update Command: 09-01, 09-14

1. Undate table 7: command list

1. UnipayIII not support Auto-Switch function

1. Add command F0-F2

1. Update Table 7: commands List (UniPay 1.5 not support command 01-05 , 2C-40)

1. Update Attribution byte and Tag DFEE26
2. Add Command C7-36, C7-37

1. Reformat “Attribution Byte” description.
2. Reformat. Add discussion of Universal SDK. Clarify, in the command table, which commands are already documented in NEO IDG versus which commands are documented in this manual.
3. Add UniPay 1.5 command  List
4. Update Table 7: Command List
5. Add Command :29-17
6. Update Tag FFEE1D
7. Update PMC state, add Unipay 1.5 do not support CL feature.
8. Insert Unipay 1.5 LED behavior to Appendix H
9. Add Tag DFEF1F 

1. Update value of tag DFEE1E to D0 DC 20 D0 C4 1E 16 00 in Identification 2C
2. Update Table 4
3. Update the flow char of PMC
4. Update Attribution Byte define
5. Update bit 4 of Attribution
6. Update all PMC Flow.
7. Update 30-01 reference to 30-03.

1. Add command Contact Get ICS Identification(60-15)
2. Add command Contact Set ICS Identification(60-16)
3. Add Major Check in Contact Set Terminal Data command.
4. Update command 14-01not support
5. Remove PMC test
6. Update PMC state flow
7. Update command 02-01 change to 02-40
8. Update command 30-01 change to 30-03
9. Add Tag DFEF25 in default setting.

1. Update command Contact Retrieve Transaction Result (60-13)
2. Update Set PMC Status (F0-00)
3. Update Tag DF30 Description
4. Add Auto Poll, Burst On Behavior
5. Update UniPay III LED Behavior

1. Update document name.

2. Update Contactless Output Format Table

3. Update Contact Output Format Table

4. Update MSR Output Format Table

5. Update Contact Set Certification Revocation List

6. Command F0-F4, F0-F5 not support

7. Update command 30-01

8. Add LED behavior

1. Update Set Certification Revocation List (60-0E) command
2. Update Data Output Format. (Add 9F39, DF30, DFEE26 in all kernel)
3. Update command “60-10, 60-11, 60-12” Default Output TLV Data List