Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »


Preface

Customer Requirement.

  This Software is used to toggle IDTECH Reader's USB device type between..

a)HID mode

b)KB mode.


Download List

VersionCommentApproved by...

V 1.00.004



 goofy.liu

  • 1.Set Burst Mode (FFF70101) + Auto Poll(DF891B0100) when toggling to USB-KB mode.
  • 2.Add Burst Mode Selection & Auto Poll Mode Selection Items
  • 3.Add Customized Tx Cmd Function, Right-Clicking the Right-Top Blank Rect Area

Ex01: 1801+ => Press [Enter] Button => Tx Ping Cmd: 18-01 , No Data

Ex02: 0400+FFF70101 = Tx Set EMV Global Configuration: 04-00, Data = FFF70101, Burst Mode On

===[New Functions]===

A. Customized Command Input, specially for USB-KB mode operation.

A.0 - Connected to the UUT First !!

A.1 - Right-Clicking Right-Top Area (A1)

A.2 - Customized Input Field (Cmd+Data; Tx/Rx Timeout in sec)

   Cmd Ex01 : 1801+, Ping command, No Tx Data,

            Where Cmd = 1801, Tx Data = NULL.

   Cmd Ex02 : 0400+FFF70101, Set EMV Global Configuration with Burst Mode ON

            Where Cmd = 0400, Tx Data = FFF70101

B.Burst Mode + Auto Poll Switches.

C.Right-Clicking Area C to update All Status..


V 1.00.003



V 1.00.003-C01, 2017 Sept 18

1.Fixed Bugs.

a.Fixed UI Info shows incorrectly

during toggling mode between HID & KB Wedge.

w/ the reader removal (or usb device invalid).


V 1.00.002



V 1.00.002-C01, 2017 Sept 14

1.Update 01-0A Commands

Tx Raw Data :

 old: 1 byte, 0x00; 0x01

 new: 2 byte, 0x0000; 0x0001

V 1.00.001



2017 Sept 12 updated

Initial Version.

Supported USB Devices.

  • UniPay 1.5 HID (PID = 0x3130)
  • UniPay 1.5 KB, KB Wedge (PID=0x3131)

  • No labels