Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 19
Next »
Date Posted | Version | Release Package | Document Version | Release Note |
---|
2017/06/22 | VP3300 NEO v1.01.047 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.047 1. Change BTPay Mini project name to VP3300 |
2017/05/19 | BTPAY MINI NEO v1.01.046 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.046 1. Fixed JIRA issues: SBMAS-64: when burst mode on,emv degrade to magstripe failed SBMAS-67: ctls_setConfigurationGroup(04,03):add 20 group and 0409 will return 0x62 BTM-21: Set Burst mode on-> Contact Start Transaction (60-10)_Failback supported-> Fail on ICC reading-> Swipe MSR card-> Reader returned MSR data as payload frame |
2017/05/18 | BTPAY MINI NEO v1.01.045 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.045 1. Fixed JIRA issues: SBMAS-59: device_sendDataCommand();sdk crash when send a long data BTM-20: Power off -> Connect PC & BTPay mini via USB -> Get FW version of BLE (30-13) -> Reader return timeout Note: There is no version 044. |
2017/05/08 | BTPAY MINI NEO v1.01.043 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.043 1. Fixed JIRA issues: SBMAS-10: ctls_removeApplicationData():this api does not work SBMAS-21: emv_startTransaction():when the 9f02 is illogical in tag,not return error. SBMAS-23: remove non-existent record,return value of some api is not right SBMAS-27: msr_startMSRSwipe(),then msr_cancelMSRSwipe() without tap a card ,sdk can't recevie response from btpay mini SBMAS-36: device_sendDataCommand():after send a long command to bypay mini,it will always return 0x0b SBMAS-43: device_setBurstMode():when burstmode on,can still do transaction SBMAS-58: burst mode on:after reconnect usb ,the burst data in demon unstable SBMAS-57: device_getTransactionResults():with usb ,when burst mode on and auto poll on ,call this api twice time will make reader disconnect 2. Fixed that SDK could not receive any response from reader after send 04-0A. |
2017/04/26 | BTPAY MINI NEO v1.01.042 | BTPAY MINI NEO v1.01.042.zip | NEO IDG_Rev 108.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.042 1. Fixed JIRA issues: BTM-19: After sent cmd 02-01 or 02-40 -> waited for cmd timeout, reader returned response frame w/ status code "08" (Timeout) twice. |
2017/04/24 | BTPAY MINI NEO v1.01.041 | BTPAY MINI NEO v1.01.041.zip | NEO IDG_Rev 108.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.041 1. Fixed JIRA issues: BTM-18: Data length of "Enhanced Encrypted MSR Data" is incorrect when get transaction result (03-40) |
2017/04/20 | BTPAY MINI NEO v1.01.040 | BTPAY MINI NEO v1.01.040.zip | NEO IDG_Rev 108.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.040 1. Fixed JIRA issues: BTM-4: Activate transaction(02-40)--> Tap ViVOtech test card ---> Some bytes of Track 1 data are missed BTM-5: Auto poll ---> Get transaction result (03-00) ---> Tap ViVOtech test card ---> Track 2 data have garbage BTM-6: Reader returned status code '00' after sent cmd 04-00 to set tag DFEF25 w/ invalid data. BTM-7: Encryption ON but w/o key, after sent cmd 02-40 -> swiped ISO4909 card, reader returned tag DFEF4D w/ incorrect data. BTM-8: Encryption ON, after sent cmd 60-10 -> waited until cmd timeout, reader returned KSN that was increased. BTM-9: Encryption ON, after sent cmd 02-40 -> tapped INTERAC card, reader returned nothing. BTM-10: Encryption ON (flag = 02), after tapped ViVOtech card -> sent cmd 03-40, reader returned tags FFEE13/ FFEE14 w/ strange data. BTM-11: Mobile phone had connected w/ reader via Bluetooth, after powered off/ on reader -> PC sent cmd, reader reboot automatically. BTM-12: After sent cmd 02-01 -> tapped iPhone w/ Panera Bread card (but reader may be failed to read it), reader returned nothing and LED 0 was become off. BTM-13: Enable Encryption = 0x03 -> Tap qVSDC -> Get transaction result 03-40 -> Reader returns incorrect value of tag DFEF4C & DFEF4D BTM-14: Enable Encryption = 0x03 -> Swipe MSR test card -> Get transaction result 03-40 -> Tag DFEF4C & DFEF4D are not returned BTM-15: Reader retruns incorrect track data format when activate transaction (02-01) and tap SamsungPay MST. BTM-16: After sent cmd 02-40 -> tapped card, sometimes reader did not read cards (Discover/ MChip) successfully. |
2017/03/20 | BTPAY MINI NEO v1.01.039 | BTPAY MINI NEO v1.01.039.zip | NEO IDG_Rev 107.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.039 1. Fixed JIRA issues: BTM-01, BTM-02 and BTM-03. 2. Add timeout feature for 30-10, 30-11 and 30-12. if user send those 3 commands to BLE via USB but BLE connected to any bluetooth device, reader send timeout(0x08) in 5 seconds. 3. Fixed TS-4926. |
2017/02/24 | BTPAY MINI NEO v1.01.038 | BTPAY MINI NEO v1.01.038.zip | NEO IDG_Rev 107.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.28.docx | NEO v1.01.038 1. Add commands: Get BLE Address (30-10) Get Friendly Name of BLE (30-11) Set Friendly Name of BLE (30-12) Note: this version do not meet the comments for tag DFEF4D, NEO IDG Rev 106. |
2016/12/14 | BTPAY MINI NEO v1.01.037 | BTPAY MINI NEO v1.01.037.zip | NEO IDG_Rev 101.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx | NEO v1.01.037 1. Release. |