1.Fixed S/N Issue. Pre-fetch 12-01 Response 62 (Empty S/N) Problem
2.Update BLE Test Procedure. Move Switch SIM2 after Get BLE Address Cmd.
3.Added Light Sensor Check in Assembly *[Dev] Adding new SaveName2 Attrs. Ex: ToType_0_HexStr_1_ASCII="2_HexStrReversed;3_HexStr2DecStr;0_HexStr"
3.1 Board Level - No Range Check since Board Status 3.2 Assembly Level - The density of illumination value range check since light pipe installed verification.