Target Project:

Vendi-USA Tech, NEO, 2015

rki-kek protocol = ViVOpay Key Management

Major Difference between TS129 & TS156

TS	Admin Key Injection Protocol
TS129	Silk 2.0 (OBS)


TS156	ViVOpay Key Management
	IDTECH Key Management

80139204 - TI

Note: Revision version can't locate in I, O, Q, S characters since Arena BOM ISO's mandatory.

Revision	Date	Description
Rev J 80139204-TI-Rev J_Vendi_20210318.pdf 80139204-TI-Rev J_Vendi_20210318.docx	22 Mar 2021	QC Mode Firmware Info Check, Additional DEK Check for QC Test After TG3 Room Key Injection. 2.[+] 4. Test Environment à1 Test Process Flow Overview. 3.New CL Type A Card.
Rev I (Forbidden in Arena) 80139204-TI-Rev I_Vendi_20210318.pdf 80139204-TI-Rev I_Vendi_20210318.docx	18 Mar 2021	QC Mode Firmware Info Check, Additional DEK Check for QC Test After TG3 Room Key Injection. 2.[+] 4. Test Environment à1 Test Process Flow Overview. 3.New CL Type A Card.
Rev H 80139204-TI-Rev H_Vendi_20201209.docx	18 Mar 2021	1.Update CL Type B Test Card Information. P/N = 80005222-001. 2.Update CT T=0 Test Card Information.
Pdf, Signed 80139204-TI-Rev H_Vendi_20201214.docx.pdf	23 Dec 2020	New CL Test Card Update 80005222-001
Doc, Unsigned 80139204-TI-Rev H_Vendi_20201214.docx	23 Dec 2020	New CL Test Card Update 80005222-001
Rev G
Pdf, Signed 80139204-TI-Rev G_Vendi_20201108.docx.pdf	08 Nov 2020	CL Type B Test Added.
Rev E
Doc, Signed 80139204-TI-Rev E_Final-V02.DOCX		For TS129, TS156 Final Version

DL List

Version

Date

Comment

SQA Verified Date & Mail

V 1.03.006

TE-1226

SWT-586

-C02.zip

15 Jun 2022

goofy.liu

1.Reset Device Updated
Delay Time
currnet: 1000 ms
new: 4000 ms

2..Fixed QC Mode Json Settings Check Failed Issue.

By Added Error Filter for Vendi Prd in Json Verification Process.
pattern1 : "Data Mismatch in Configuration Group 0"

-C01.zip

13 Jun 2022

goofy.liu

1. ViVOConfig CLI Tool -
1.a UpdateIDT Updated.
##1.0.1.20 --> ##1.0.1.30
Vendi FW: NEO v1.00.139.1
Effective Model Number:
IDVV-120101A-US

1.b Fixed Production Mode Importing Issue.

2. QC Mode "FWInfo" Item
Ignored spec multiple TLVs during tags verification.
-9F41 Transaction Counter.
-9F21 Transaction Time.
-9A Transaction Date.
-DFEE3A USBInterface HID/KB Indicator.

3.TimeCheck Update
- QC Mode ONLY

- Ask User to allow the Time Diff Value more than tolerance.
- Select 'Yes', 1 time only and keep ignoring the error, but have logged info.
- Select 'No', 1 time only and acts as normal error process.

-Effected Model Numbers.
ALL Model Numbers

V 1.03.005

JIRA: PO-13

SQA JIRA: TE-821

-C01.zip

07 Jul 2021

goofy.liu

1.ViVOConfig CLI Tool - UpdateIDT updated.

Effected P/N:

IDVV-120101A-US

2.Time Set/Check Item Updated

Time Zone Criteria:

old: UTC +08:00

new: UTC +00:00,

Effected P/N:

IDVV-120101A-US, and others

note: for compatible reason, +08:00 is also allowed in QC check mode

QC Time checking scenario : UTC +00:00 checking --> failed, try to do UTC +08:00 checking --> Done.

Rootcause : After ViVOConfig MFG Performing, DUT's Date/Time value has be re-calibrated to UTC +00:00. But Native TS156 using UTC +08:00 as the shipping value.

V 1.03.004

JIRA: TE-807

-C03.zip

29 Jun 2021

goofy.liu

1. P/N Updated

[M] IDVV-120101A-US :

old json file: CFG-USATE02-01-0

New : CFG-USATE02-01-0, modified by Goofy.

==<Comment>==
BTW, Json CFG file has been modified by me,
Group 1:
1.a Removal of the following duplicated tags.

9F1A

9F35
1.b Using 9F09 = 00 02

-C02.zip

25 Jun 2021

goofy.liu

1.Remove USB Unplug behaviors before ViVOConfiguration~

P/N Scope, json file: IDVV-120101A-US

Json Known Issue: Group 1 TLV values injection failed.

Root cause : Duplicated tags , as the following..

9F09 --> Application Version Number Reader....... = 01 00

9F09 --> Application Version Number Reader....... = 00 02

9F1A --> Terminal Country Code................... = 08 40

9F35 --> Terminal Type........................... = 25

-C01.zip

18 Jun 2021

goofy.liu

1. P/N Updated
[M] IDVV-120101A-US :
json file: CFG-USATE02-01-0
Production Mode = Loading Json & Check
QC Mode = Check ONLY (Reading Reader Content --> compare with json file's settings)
2. Embeded Randy's ViVOConfig Command Line Tool.
2.1 + "UpdateIDT" folder, ViVOConfig Tool

V 1.03.003

TE-702 - Getting issue details... STATUS

-C01.zip

18 Mar 2021

goofy.liu

1. Support QC-US mode when TS detects DEK presentation.

Objective: In case of DUT QC Mode Test after TG3 DEK injection,

Method:

At First DUT, TS asks the QC users to

accept DEK presentation as passed DUT. -- Way 01

or

reject it as failure one. -- Way 02

2.Lead-In New CL Type A Card

V 1.03.002

TE-603 - Getting issue details... STATUS

SHA-512:

04433BA06606CE3662E90E4382B89AA410072BBDE27F704B594A635A4B3783AC30F1F4305D0C334F8D7ED1A03143A3695A5EE6C09F6A5D6FAF7E7FB99244E8ED

-C02.zip

12 Jan 2021

goofy.liu

1.MSR Test Item update

1.a No Retrying

1.b Timeout 10 secs --> 30 secs

-C01.zip

11 Jan 2021

goofy.liu

1.[RFID Test] Improvement. MFG Request
Removal Card Waiting Period Fine-tune.

Tested P/N: IDVV-120101A-US

V 1.03.001

TE-553 - Getting issue details... STATUS

-C01.zip

08 Dec 2020

goofy.liu

1. Admin Key Injection - KSN naming rule update
old: LID/SID = 0/0
new: LID/SID = from registry value
Checking database DUT test info entity,
folder: C:\AdminKInj
2.Fixed Following Issue(s)
2.1 if P/N isn't typing until full matched
--> Press "Connect"
--> TS crashed.
Solution: Get Full P/N Name
3.[RFID Test Improvement]
Vendi TS156, CL Type A Test Issue
A.prior scenario = Poll For Token --> Checking "Type A" Response --> Done
B.new = CL EMV L1, Carrier ON --> WAKEUP A --> 3+ times Found (04 00) --> Carrier OFF --> Done

V 1.02.002

-C02.zip

28 Oct 2020

goofy.liu

1.RFID Test Update

old: Extra PCD Text parameters IN before Test

new: Off (Remove) it.

SQA Approval Request JIRA : TE-439

-C01.zip

24 Oct 2020

goofy.liu

1.RFID Test Updated , Type A+Type B : 0cm+4cm Tests
old: Type A : 0cm+4cm , 2 sub-steps.
new: Type A+B : 0cm+4cm , 4 sub-steps.

2.Summary Log
Manually open Summary Log File by Mouse Right-Clicking Test Window's Top Tab (Production Mode/QC Mode/QC-US mode)

SQA Approval Request JIRA : TE-439 - Getting issue details... STATUS

V 1.02.001

-C01.zip

12 Jun 2020

goofy.liu

1.RFID Test - Updated.

new: RFID Test Start --> 0 cm test --> 4 cm test --> Done

old: RFID Test Start --> settings PCD configuration --> Auto-Repower ON --> 0 cm test --> 4 cm test --> Done.

note: Engineer Mode's option could enable old method.

Mindy Yang 22 Jun 2020
RE VendiTS156 V1.02.001-C01 Released for RFID test issue..msg

V 1.01.010

-C03.zip

01 Nov 2019

goofy.liu

1.Update several display messages.

a.Card P/N information been removed.

b.Connection Specific Interfaces Information been removed during automatically rebooting DUT steps.

RE TS156 Vendi V1.01.010-C03 Released.msg

-C02.zip

31 Oct 2019

goofy.liu

1.Update RFID Steps.

old: RFID Test Start --> 0 cm test --> 4 cm test --> Done

new: RFID Test Start --> settings PCD configuration --> Auto-Repower ON --> 0 cm test --> 4 cm test --> Done.

-C01.zip

21 Oct 2019

goofy.liu

1.RFID updated in 4cm test

old: Vivo Test Card, Type B

new: Mifare, EasyPay Card, Type A (悠遊卡)

Note: To improve TQM RFID Bad Test Performance in 4 cm range by using Easy Card instead of Type B one.

V 1.01.009

-C02.zip

02 Sep 2019

goofy.liu

1.[TQM] Add TQM Test Support

1.1 RFID Item : 0cm+4cm tests

2.Update message string.

2.1 S/N naming rule

old : "WI 7.5.1-8"

new : "WI 309-1"

3. P/N List Updated

[X] IDVV-110101

[X] IDVV-110101N

[X] IDVV-110101N-C1

[X] IDVV-110101P

[X] IDVV-120101-US

4. Fixed LED test issues.

QC mode : remove useless IDG commands.

SHA-512: FC34EC6DFA9624FE678775EFDB5FCA25F569DCED110393571CB916D7BB680CF80FB3E79181BA024844FD7EE953FA9DD15FE360A4B573F82D88372A0BFA6D3DD3

RE VendiNEO 1.0TS156 V 1.01.009-C02 Released.msg

-C01

28 Aug 2019

goofy.liu

NEO v1.00.127

BL Version = Vendi-BL-V3.00.010

1.Support Json Cfg file.

(Could be ignored until json configuration file is ready for Vendi)
TM :
       read config(=A) from json file.
       write/set config data in the DUT.
       read config(=B) from the DUT and compare (A,B)

QC : read config(=A) from json file.
       read config(=B) from the DUT and compare (A,B)

       json file = 007 - TS160, For VP3300 USB. Legacy Name = VP4880, a.k.a. Goose Run

Inherited from TS160 V2.00.009-C02

2.Ignored DFEE3A USB Interface Indicator (HID, KB mode) in FWInfo Test @ QC Mode
cause: MFG QC Candy Reported that TS's QC Mode FWInfo Item Failed on 2019 Aug 22(Fri)

3. RTC Test @ QC mode
old: start QC mode --> FWInfo --> several test items passed --> RTC check --> certain (S/N check) --> Done.
new: start QC mode --> FWInfo --> RTC Set/Check --> several test items passed --> RTC check --> certain (S/N check) --> Done.

4.[Fixed] Potential Issues, from VP3300 USB V2.00.009-C03
1.a Removed Automatic Poll Mode Setting
1.b Removed Burst Mode Setting

V 1.01.008

-C01

-C02.RMA.PMode.zip

05 Mar 2019

05 Mar 2019 goofy.liu

1.P/N List Updated

1.1 IDVV-120101-CR, configuration updated

old: Burst Mode = OFF, Encyrption MSR/MSD = ON, Encryption EMV = OFF

new: Burst Mode = ON, Encyrption MSR/MSD = OFF, Encryption EMV = OFF

FW = V 1.00.111.3

-C02.RMA.PMode = RMA Special Version

1.P/N List Updated

1.1 IDVV-120101-CR.RMA.PMode,

This is a temporary TS Version for RMA Center Rework, Production Mode.

1.1.A Configuration Update:

old: Burst Mode = OFF, Encyrption MSR/MSD = ON, Encryption EMV = OFF

new: Burst Mode = ON, Encyrption MSR/MSD = OFF, Encryption EMV = OFF

FW = V 1.00.111.3

1.1.B Simplification Test Items for RMA

FWInfo --> RTC Set/Check --> S/N --> Admin Key --> Configuration

==< Checksum >==

Tools:

Objective: Installation Package Setup...-C01.exe

SHA-512: 4FA3B3294FAF15191C5FA16A7A83E0637046A29CADDE6E225E94B3DC49F540BEF0A352C4269A2D57FAE99EACC2F79800A28E6E731BEE91B6BA95D28BBDC85508

V 1.01.007

-C01

06 Aug 2018

06 Aug 2018 goofy.liu

1.Update P/N Settings

IDVV-120101-SE , Encryption Settings

old: MSR+MSD/EMV = ON/OFF

new: MSR+MSD/EMV = OFF/OFF

Approved in FW NEO v1.00.106.2, default baudrate = 19200

V 1.01.006

For USA-Tech IDVV-120101A-UC Rework SOP

Step	Comment
01	Run "Engineer Mode" Connect To UUT Select "IDVV-120101A-UC"
02	Select "Production Mode"
03	Perform Default Setting to inject Interac CAPKs (Index05, Index 06, and Index 08) into the UUT
04	Verification & Approval of UUT settings integrity. Select P/N "IDVV-120101A-UC" Run Standard + QC Mode
05	Click "0.Start" to go through all QC mode test items.

-C100

09 May 2018

09 May 2018 goofy.liu

1.+ P/N IDVV-120101A-UC.Temp

For Rework from IDVV-120101A-US (Rev A,B,and C) --> this.

-C02

09 Dec 2017

19 Dec 2017 goofy.liu

V1.01.006-C02, 2017 Dec 19

1.Update P/N Settings

IDVV-120101-US ,

MSR/EMV = OFF/OFF

IDVV-120101A-US,

MSR/EMV = OFF/OFF

IDVV-120101A-UC,

MSR/EMV = OFF/OFF

+Right Key Exclude Setting

IDVV-110101N-C1,

+Right Key Exclude Setting

-C01

18 Dec 2017

V1.01.006-C01, 18 Dec 2017 goofy.liu

1.+ P/N IDVV-120101A-UC

Load 3 CAPKs & Check.

Following up ECN-007459

FW USAT Canada Part Number and Rework.msg

V 1.01.005

-C01

14 Sep 2019

V1.01.005-C01, 2017 Sept 14

1.IDVV-120101A, AES, MSR/MSD ON,EMV OFF

2.Rename USB_HID_IDTW.dll to USB_HID_IDTW_32bit.dll

3. Request.

RE IDVV-120101A.msg

2017 Sept 14, Approved by Kate Hung

RE TS156Vendi V1.00.005-C01 Released.msg

V 1.01.004

V 1.01.004-C01

14 Jun 2017

V 1.01.004-C01, 2017 June 14

1.Fixed Admin Key Injection has no Serial Number in Database

RE TS156 V1.01.004-C01 Released.msg

V 1.01.003

V 1.01.003-C03

26 May 2017

V1.01.003-C03, 2017 May 26

1.[+PN], migrated from TS129

IDVV-120101-CR

IDVV-120101-SE,Baudreate=19200

Kate's Approval.msg

V 1.01.003-C02

22 May 2017

2017 May 22

1.[-PN]IDVV-120101-E1, Removed.

Steven_Approval.msg

V 1.01.003-C01

17 May 2017

V1.01.003-C01, 2017 May 17

1.Changed depending on ECN-007212

Purpose:Keypad Test ONLY has Left Key Test, Exclude/Disable Right Key Part.

Folloing P/Ns have been modified for this ECN.

-------------------------------------------

IDVV-110101 (only the left key), Vendi-C

IDVV-110101N (only the left key), Vendi-C

IDVV-110101P (only the left key), Vendi-C

IDVV-120101-US (only the left key)

IDVV-120101A-US (only the left key)

2.USB-HID Test, Roy's Request.

If The RS232 Reconnection up to 3 times...

Old version = Auto Using USB-HID Interface.

New version = Failed & Stop Test.

RE TS156VendiVendi-C V1.01.003-C01 Released.msg

- 2017 May 18, Approval by Kate Hung

V 1.01.002

V 1.01.002-C02

19 Apr 2017

V 1.01.002-C02, 2017 April 19

1.Fixed LCD Display Message in TS.

2 Rows Text Pattern I --> 2 Rows Text Patter II --> Again.

V 1.01.002-C01

12 Apr 2017

V1.01.002-C01, 2017 April 12

1.[+PN] IDVV-120101N

Encryption Algorithm TDES;

Encryption :MSD/MSR OFF, EMV OFF;

By SW: [FWInfo] = NEO v1.00.075.1

Vendi-BL-V3.00.009

2017 April 13, Approved by Kate Hung

RE TS156USA-Tech V1.01.002-C01 Released.msg

V 1.01.001

SetupTS156_1.01.001-C01.exe

25 Jan 2017

V1.01.001-C01, 2017 Jan 25

1.[+PN]IDVV-120101-E1

Encryption Algorithm TDES;

Encryption :MSD/MSR ON, EMV OFF;

USATech Customized TLVs Setting, see couple of doc links

2.Display Encryption & DUKPT Info in QC Mode [FWInfo] Item

see following doc link

RE VP4880 TS160 Encryption Status Verification.msg

2017 Jan 26, Approved by Mindy Yang

SetupTS156_1.00.007-C01.exe

03 Jan 2017

V1.00.007-C01, 2017 Jan 03

1.[+PN]IDVV-110101N-C1, TDES,MSD/MSR & EMV OFF, No MSR

SetupTS156_1.00.006-C01.exe

26 Dec 2016

V1.00.006-C01, 2016 Dec 26

1.[+PN]IDVV-120101P, TDES,MSD/MSR & EMV ON

2.[+PN]IDVV-110101P, TDES,MSD/MSR & EMV ON, No MSR,Vendi-C

3.[+PN]IDVV-110101N, TDES,MSD/MSR & EMV OFF, No MSR, Vendi-C

SetupTS156_1.00.005-C01.exe

13 Dec 2016

V1.00.005-C01, 2016 Dec 13

1.<Enhancement>

+IDVV-110101, For Vendi-C Project (Ext Prj of Vendi-USATech)

Encryption Algo = TDES

Encryption MSR ON, EMV OFF,

No MSR Test

SetupTS156_1.00.003-C01.exe

20 Sep 2016

V1.00.003-C01, 2016 Sept 20

---<P/N>---

1.[+] IDVV-120101-P1

TDES, Encryption EMV - OFF, Encryption MSR - ON

SetupTS156_1.00.002-C04.exe

31 Aug 2016

V1.00.002-C04, 2016 Aug 31

1.Fixed UI Error, Found in Win8,Test PC

SetupTS156_1.00.002-C03.exe

30 Aug 2016

V1.00.002-C03, 2016 Aug 30

1.Renew PN List as the following

IDVV-120101;IDVV-120101A-US;IDVV-120101-US

2.Fixed MSR Encryption Enable Setting

3.Fixed UI Display Problem in Form02

SetupTS156_1.00.002-C02.exe

29 Aug 2016

V1.00.002-C02, 2016 Aug 29

1.Uninstallation is able to remove userdata part number list

SetupTS156_1.00.002-C01.exe

26 Aug 2016

V1.00.002-C01, 2016 Aug 26

1.Remove IDVV-120101A-US, IDVV-120101-US

2.Add IDVV-120101

Encryption Algo : TDES

Encryption EMV : Disable

Encryption MSR : Enable

Figures Bank
There are no images attached to this page.

Target Project:

Major Difference between TS129 & TS156

TS129

Silk 2.0 (OBS)

TS156

ViVOpay Key Management

IDTECH Key Management

80139204 - TI

Note: Revision version can't locate in I, O, Q, S characters since Arena BOM ISO's mandatory.

Rev J

Rev I (Forbidden in Arena)

Rev H

Pdf, Signed

Doc, Unsigned

Rev G

Pdf, Signed

Rev E

Doc, Signed

DL List

V 1.03.006

V 1.03.005

V 1.03.004

V 1.03.003

V 1.03.002

V 1.03.001

V 1.02.002

V 1.02.001

V 1.01.010

V 1.01.009

V 1.01.008

V 1.01.007

V 1.01.006

For USA-Tech IDVV-120101A-UC Rework SOP

V 1.01.005

V 1.01.004

V 1.01.003

V 1.01.002

V 1.01.001

Figures Bank