Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Next »





Test Instruction - TI, 80158217

VerDateComment

 

  • 1.Update ICC Test Card.

Old: Type 01 + Type 02, 2 kinds of cards

New: New ICC Test Card, 1 kind ONLY.

  • 2.Adding Summary Log – QC mode
  • 3.Removed P/N List Information.

goofy.liu

 

TQM Test Request Support.

  • 1.A RFID : 0cm+4cm
  • 1.B ICC Contact Test:

      Type 01 + 02 Contact Card Combination Test.

  • 2.Revised Pages

Page 3,8, and 10.

goofy.liu

 

  goofy.liu

Initial Version


Visa-TQM Audit Notes:

Test ItemComment

RFID

1.Contactless Card Type : A (a.k.a. Mifare) + B

TypeComment

A

A.K.A. Mifare Card

B


2.Range Criteria : 0 cm + 4 cm / per card

ICC Smart Card

  1. Get ATR

  2. APDU Operation: Open + Read Data from the Smart Test Card.


Download Link

VerDate / Git-HashCommentApproved by

V 1.01.001




 

goofy.liu

  • 1.Json File Injection Support.
      - P/N List
      - IDV8-300P-I1, CFG-IMPULSE-01.json
       Note 01 : Arena only contains ImpulsConfig.exe to loading the EMV L2 Configuration.

       - Production Mode , + Write+Check the json file.
       - QC Mode, + Check the reader's EMV L2 data , against the CFG-IMPULSE-01.json content.



  • Json file export tool : ViVOConfig Configuration Utility.
  • How to Gen CFG-IMPULSE-01.json file.
        step 01 - Reset VP8300 Device, Cmd=04-F0, 
                  w/ Firmware "VP3300 USB NEO v1.01.184"
        step 02 - Run ImpluseConfig.exe,which is downloaded from Arena "IDV8-300P-I1's CFG-IMPULSE-01 item"
        step 03 - Use ViVOConfig Utility V1.0.001.093 version "Read Config From Device", save the data as
                  "CFG-IMPULSE-01.json" file.

V 1.00.009


TE-765 - Getting issue details... STATUS


 

goofy.liu

  • 1.Fixed can't perform ICC Test Issue.

 

goofy.liu

  • 1.P/N List Updted

 + IDV8-300P2D     TDES, MSR/MSD ON,  EMV ON,  LCL-KEK+DEK(Demo)

 + IDV8-300AP2D     AES, MSR/MSD ON,   EMV ON,  LCL-KEK+DEK(Demo)


V 1.00.008




 

goofy.liu

  • 1.Visa-TQM Audit Issue - RFID Test Updated 
    old : 0cm+4cm && CL Type A ,   2-subTest required.
    new : 0cm+4cm && CL Type A+B , 4-subTest required.

SQA Test JIRA : TE-438 - Getting issue details... STATUS


V 1.00.007




 

goofy.liu

  • 1.P/N List Updated
    [+]IDV8-300PD2, TDES, MSR/MSD ON, EMV ON, LCL-KEK+DEK(Demo)
    [+]IDV8-300P2, TDES, MSR/MSD ON, EMV ON, LCL-KEK
    [+]IDV8-300AP2, AES, MSR/MSD ON, EMV ON, LCL-KEK
  • 2.Adding Summary Log.txt after Production/QC mode test.
    opening summary.log
    Clicking [Production / QC mode] at the top status bar of the test items running window.

Ex: Summary-2020616-IDV8-300PD2_QC.log

  • 3.[ICC] New ICC Test Card.
    old: Type 01 + Type 02
    new: New ICC Test Card.

V 1.00.006




 

goofy.liu

  • 1.P/N List Updated

[+] IDV8-300P-I1, TDES, MSR/MSD ON, EMV ON

V1.00.005




 

goofy.liu

  • 1.P/N List Updated

[+] IDV8-307, TDES, MSR/MSD ON, EMV OFF

USB-KB, ICS = 5C, Set Terminal Data(5C)

V 1.00.004




 

goofy.liu

  • 1.Fixed Demo P/N Issues
    1.a updated key injection content
    old: DUKPT Admin Key (LCL-KEK) - Production Version
    Key Name - IDT-KEYINJ-A107
    DUKPT Admin Key (DEK) - N/A
    Key Name - N/A

    new: DUKPT Admin Key (LCL-KEK) - Demo Version
    Key Name - IDT-KEYINJ-DR0002
    DUKPT Admin Key (DEK) - Demo Version
    Key Name - IDT-KEYINJ-D01
    1.b P/N List , w/ Demo DUKPT Initial Keys(LCL-KEK + DEK)
    IDV8-300PD, TDES, MSR/MSD ON, EMV ON
    IDV8-300D, TDES, MSR/MSD ON, EMV ON
  • 2.AdminKey_Injection.exe updated
    for Demo Key Injection Support.
    V1.1.0.8 --> V1.1.0.9

V 1.00.003




 

goofy.liu

  • 1.TQM Request Supported

1.A RFID Test : 0cm+4cm

1.B ICC Test :

  old: Insert Contact Type 02 Card --> Remove Type 02 Card --> Done

  new: Insert Contact Type 01 Card --> Remove Type 01 Card --> Insert Contact Type 02 Card Insert --> Remove Type 02 Card --> Done

  • 2.FW Information Update.

old: VP3300 USB-BL-V3.00.012

new: BL Version = VP3300 USB-BL-V3.00.012

  • 3.More Checks in TS Version String.

V 1.00.002


--< P/N List >--

  • IDV8-300,         TDES, MSR/MSD ON,  EMV OFF
  • IDV8-300N,        TDES, MSR/MSD OFF, EMV OFF
  • IDV8-300A,        AES,  MSR/MSD ON,  EMV OFF
  • IDV8-300P,        TDES, MSR/MSD ON,  EMV ON
  • IDV8-300AP,       AES, MSR/MSD ON,  EMV ON
  • IDV8-300P-C1,       TDES, MSR/MSD ON, EMV ON
  • IDV8-300D,          TDES, MSR/MSD ON, EMV OFF
  • IDV8-300PD,         TDES, MSR/MSD ON, EMV ON

 

 goofy.liu

  • 1.Fixed AdminKey Execution Files Missed Issue.

 

 goofy.liu

  • 1.PN List Updated

[+]IDV8-300P-C1, TDES, MSR/MSD ON, EMV ON

[+]IDV8-300D,    TDES, MSR/MSD ON, EMV OFF

[+]IDV8-300PD,   TDES, MSR/MSD ON, EMV ON

  • 2.Test Item(s) Improvement.

2.1 - RFID Test

  Old : Poll For Token (PFT(GetUID)) --> Antenna Power OFF (APOFF) --> Done.

  New : PFT(GetUID), 0 cm distance --> APOFF --> PFT(Card Removal,Please) -->

        APOFF --> PFT(GetUID), 4 cm distance --> APOFF --> Done.

2.2 - ICC Test , Up Timeout Value for 60-14 read card status period.

  • 3.Release File Format Changed.

old: installation exe type, user\data\AppRoam\TSXXX....

new: zip type, local folder.


V 1.00.001




 

 goofy.liu

1.new P/N

IDV8-300,  TDES, MSR/MSD ON, EMV OFF

IDV8-300N, TDES, MSR/MSD OFF, EMV OFF

IDV8-300A, AES, MSR/MSD ON, EMV OFF

IDV8-300P, TDES, MSR/MSD ON, EMV ON

IDV8-300AP, AES, MSR/MSD ON, EMV ON


2.Initial Version




  • No labels