002 - 3350 (BTE + EVK Fixture (BTH)

BTHost – PC : Get FW Version of BTHost, make sure BTHost Ready

DUT – PC : Ping, Get BLE Address (BLAddr), Set PIN = 654321, Default Friendly Name(DFN) → Get PIN and check

BTHost - PC : Ask BTHost Connect to DUT (BLAddr,PIN) .

DUT –(Air)– BTHost – PC : PC send IDG Ping & Buzzer over BTHost (By pass) to DUT then retrieving response in reverse way.

BTHost - PC : Disconnecting from DUT → BTHost Rebooting

2.Setting Friendly Name

001 - BT Test Flow Discussion

()目的: 針對產線測試生產的需求, 要 BTF  進行整合TS測試, 以求生產測試順利.

想跟你請教下 關於Bluetooth測試治具的技術問題.

(B)定義,Abbreviation:

BTF = AVNET.COM Bluetooth Test Fixture & Software / Lib / SDK

TS = 璟昇 (IDT)生產測試軟體

DUT = IDT 的生產測試產品

MAC = Bluetooth MAC Address.

(C)BT Running Steps.

1.TS selects BTF Interface(RS232 Port#,Baudrate)

2.TS pings BTF , checks presentation.

  TS -- BTF

3.TS asks DUT to prepare stuffs(Get BLE Mac Address, Rebooting, and so on)

  TS -- DUT

4.TS asks BTF (control mode) to scan DUT (MAC), by BLE Air.

  TS – BTF … DUT

5.If Found DUT by BLE Air, send/receive certain commands over the BLE communication.

TS – BTF – DUT

Then TS – BTF … DUT, BTF disconnects comm from DUT

6.Test Done.

002 - BT Test Flow 2

001 - BT Test Flow Discussion

(A)目的: 針對產線測試生產的需求, 要 BTF  進行整合TS測試, 以求生產測試順利.

想跟你請教下 關於Bluetooth測試治具的技術問題.

(B)定義,Abbreviation:

BTF = AVNET.COM Bluetooth Test Fixture & Software / Lib / SDK

TS = 璟昇 (IDT)生產測試軟體

DUT = IDT 的生產測試產品

MAC = Bluetooth MAC Address.

(C)BT Running Steps.

1.TS selects BTF Interface(RS232 Port#,Baudrate)

2.TS pings BTF , checks presentation.

  TS -- BTF

3.TS asks DUT to prepare stuffs(Get BLE Mac Address, Rebooting, and so on)

  TS -- DUT

4.TS asks BTF (control mode) to scan DUT (MAC), by BLE Air.

  TS – BTF … DUT

5.If Found DUT by BLE Air, send/receive certain commands over the BLE communication.

TS – BTF – DUT

Then TS – BTF … DUT, BTF disconnects comm from DUT

6.Test Done.

002 - BT Test Flow 2