FW_BTpay mini (VP3300) F/W release

NEO IDG_Rev 149.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.66.docx

VP3300 Bluetooth NEO v1.01.090
1. Fix BTM-124.

NEO IDG_Rev 149.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.50.docx

VP3300 Bluetooth NEO v1.01.089
1. Fix BTM-125, BTM-127, BTM-128, BTM-129, BTM-131, BTM-133.

NEO IDG_Rev 149.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.50.docx

VP3300 Bluetooth NEO v1.01.088
1. Adding tag DFED47 for switching VISA Europe.
2. Adding DFEF4B function for QC mode.

NEO IDG_Rev 133.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.62.docx

NEO IDG_Rev 130.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.50.docx

VP3300 Bluetooth NEO v1.01.060
1. Fixed JIRA issue:
TS-9598: Android Pay issue on Vendi with firmware 98.1
TS-9599: Mobile wallet Discover issue on Vendi with firmware 98.1( fixed DFEF4D issue)
TS-9986: Greg 04 09
2. JIRA issues: CS-1563/ CS-1575/ CS-1589/ TS-9598/ TS-9599/ TS-9986/ TS-9987

NEO IDG_Rev 111.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.35.docx

VP3300 Bluetooth NEO v1.01.050
1. Fixed JIRA issues:
FUI-210: After AT cmd 02-01 (or 02-40) was timeout -> sent AT cmd again, AT cmd can not work anymore.
FUI-211: Activate transaction(02-01) or (02-40) then Tap VISA qVSDC card -> Activate transaction again -> Reader return status code 0x0B

NEO IDG_Rev 111.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.35.docx

VP3300 Bluetooth NEO v1.01.049
1. Fixed JIRA issues:
TS-6106/CS-1121/GRN-87: VP4880C - FW#28| Slow transaction for both MC and Visa cards
BTM-33: Bootloader version error
BTM-32: Cmd C7-30, response error 0x03 (Unknown Sub-Command)
BTM-31: Reader have short beep twice and 1 long beep sometimes when tap Master Card Mchip
BTM-30: Activate transaction-> Tap Master Card-> Don't remove card and activate transaction again, no response returned
BTM-29: Card shall not be read in activating a transaction when it has not been removed from RF field since the previous transaction was done
BTM-28: Reader returned status code as 0x08 (Timeout) when set Friendly Name of BLE (30-12)

2. Support PIN Variant.

VP3300 Bluetooth-BL-V3.00.012
1. Fixed JIRA issues:
BTM-33: Bootloader version error

NEO IDG_Rev 111.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.34.docx

VP3300 Bluetooth NEO v1.01.048
1. Support SmartTap 2.1
2. reader return status code 0xA3 when get Activate transaction and user insert CT card.
3. Update FW version and naming:
FW version : NEO v1.01 -> VP3300 Bluetooth NEO v1.01
FW full version : BTPAY MINI NEO v1.01.xxx -> VP3300 Bluetooth NEO v1.01.xxx
HW_VERSION : HW,VPBTPay Mini\r\nK21F Rev -> HW,VP3300 Bluetooth\r\nK21F Rev
4. Update USB product string:
product string : BTPay mini -> VP3300 Bluetooth
5. Fixed JIRA issues:
BTM-22: pull card befor 60-10 finished,btpay mini will alway response 0x0c
BTM-23: set burst mode off,auto poll on,tap a card with data,then tap a card without data,use(03-40),reader will return wrong data
BTM-24: device_setBurstMode(2):(04-00 fff7-02),when set burst mode auto exit,reader works as burst mode always on
BTM-25: (60-14),card seated state may not be proper
BTM-27: connect android sdk with usb,reader will not response (60-11 60-12) when startTransaction timeout
BTM-28: Reader returned status code as 0x08 (Timeout) when set Friendly Name of BLE (30-12)
SBMAS-73: emv_startTransaction():will have little chance that can't decode the tlv of response

VP3300 USB-BL-V3.00.011
1. Update BL version:
BL version : BTPAY_MINI-BL-V3.00.xxx -> VP3300 Bluetooth-BL-V3.00.xxx
2. Update USB product string:
product string : ID TECH BTPay mini -> VP3300 Bluetooth

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx

NEO v1.01.047
1. Change BTPay Mini project name to VP3300

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx

NEO v1.01.046
1. Fixed JIRA issues:
SBMAS-64: when burst mode on,emv degrade to magstripe failed
SBMAS-67: ctls_setConfigurationGroup(04,03):add 20 group and 0409 will return 0x62
BTM-21: Set Burst mode on-> Contact Start Transaction (60-10)_Failback supported-> Fail on ICC reading-> Swipe MSR card-> Reader returned MSR data as payload frame

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx

NEO v1.01.045
1. Fixed JIRA issues:
SBMAS-59: device_sendDataCommand();sdk crash when send a long data
BTM-20: Power off -> Connect PC & BTPay mini via USB -> Get FW version of BLE (30-13) -> Reader return timeout

Note: There is no version 044.

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx

NEO v1.01.043
1. Fixed JIRA issues:
SBMAS-10: ctls_removeApplicationData():this api does not work
SBMAS-21: emv_startTransaction():when the 9f02 is illogical in tag,not return error.
SBMAS-23: remove non-existent record,return value of some api is not right
SBMAS-27: msr_startMSRSwipe(),then msr_cancelMSRSwipe() without tap a card ,sdk can't recevie response from btpay mini
SBMAS-36: device_sendDataCommand():after send a long command to bypay mini,it will always return 0x0b
SBMAS-43: device_setBurstMode():when burstmode on,can still do transaction
SBMAS-58: burst mode on:after reconnect usb ,the burst data in demon unstable
SBMAS-57: device_getTransactionResults():with usb ,when burst mode on and auto poll on ,call this api twice time will make reader disconnect

2. Fixed that SDK could not receive any response from reader after send 04-0A.

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.042
1. Fixed JIRA issues:
BTM-19: After sent cmd 02-01 or 02-40 -> waited for cmd timeout, reader returned response frame w/ status code "08" (Timeout) twice.

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.041
1. Fixed JIRA issues:
BTM-18: Data length of "Enhanced Encrypted MSR Data" is incorrect when get transaction result (03-40)

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.040
1. Fixed JIRA issues:
BTM-4: Activate transaction(02-40)--> Tap ViVOtech test card ---> Some bytes of Track 1 data are missed
BTM-5: Auto poll ---> Get transaction result (03-00) ---> Tap ViVOtech test card ---> Track 2 data have garbage
BTM-6: Reader returned status code '00' after sent cmd 04-00 to set tag DFEF25 w/ invalid data.
BTM-7: Encryption ON but w/o key, after sent cmd 02-40 -> swiped ISO4909 card, reader returned tag DFEF4D w/ incorrect data.
BTM-8: Encryption ON, after sent cmd 60-10 -> waited until cmd timeout, reader returned KSN that was increased.
BTM-9: Encryption ON, after sent cmd 02-40 -> tapped INTERAC card, reader returned nothing.
BTM-10: Encryption ON (flag = 02), after tapped ViVOtech card -> sent cmd 03-40, reader returned tags FFEE13/ FFEE14 w/ strange data.
BTM-11: Mobile phone had connected w/ reader via Bluetooth, after powered off/ on reader -> PC sent cmd, reader reboot automatically.
BTM-12: After sent cmd 02-01 -> tapped iPhone w/ Panera Bread card (but reader may be failed to read it), reader returned nothing and LED 0 was become off.
BTM-13: Enable Encryption = 0x03 -> Tap qVSDC -> Get transaction result 03-40 -> Reader returns incorrect value of tag DFEF4C & DFEF4D
BTM-14: Enable Encryption = 0x03 -> Swipe MSR test card -> Get transaction result 03-40 -> Tag DFEF4C & DFEF4D are not returned
BTM-15: Reader retruns incorrect track data format when activate transaction (02-01) and tap SamsungPay MST.
BTM-16: After sent cmd 02-40 -> tapped card, sometimes reader did not read cards (Discover/ MChip) successfully.

NEO IDG_Rev 107.doc 

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.039
1. Fixed JIRA issues: BTM-01, BTM-02 and BTM-03.
2. Add timeout feature for 30-10, 30-11 and 30-12. if user send those 3 commands to BLE via USB but BLE connected to any bluetooth device, reader send timeout(0x08) in 5 seconds.
3. Fixed TS-4926.

NEO IDG_Rev 107.doc 

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.28.docx

NEO v1.01.038
1. Add commands:
Get BLE Address (30-10)
Get Friendly Name of BLE (30-11)
Set Friendly Name of BLE (30-12)

Note: this version do not meet the comments for tag DFEF4D, NEO IDG Rev 106.

NEO IDG_Rev 101.doc 

 NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx

NEO v1.01.037
1. Release.