Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Objective Application

  • Felica L1 Test
  • Mifare L1 Test

Description & Usage

This SDK is used to test Felica Card Reader Test by Poll For Token IDG Commands.

FunctionCommentRun Steps
ASet Test Rounds of Poll For Token1
BConnection & Start test2
CStop Test Rounds & Close Connection3
DLogging WindowsN/A

Document

Item

Description

This is new IDG Command format
2C-02
Poll for token.

Provide a new preselect card type

in Tx data (A,B,C, and combination of them)

Download Link

VersionUpdate InfoApproved

V 1.00.002



-C01

  goofy.liu

  • 1. Change to Mifare Type Card Test Method by Command Line.

/POLLFORTOKENTYPE=MIFARE --> indicatee Mifare Test Method.

  • 2. Default Rounds

   old = 100

   new = 50

  • Verified Reader:

FW Build:VP3300 USB NEO v1.01.054,

VP3300 USB-C Type


V 1.00.001



-C05

 goofy.liu

V 1.00.001-C05, 2017 Nov 22

1.Change Default TxRx Timeout

100ms --> 200ms


-C04

 goofy.liu

V 1.00.001-C04, 2017 Nov 15

1.Add Timeout Settings Field.


-C03

-C03.zipfile

Update 2C-02 command to

meet new firmware.

FW: VP3300 USB

(Legacy: Goose Run, VP4880)

V1.01.061

-C02

-C02.zipfile

V 1.00.001-C02, 2017 Nov 07
1.Replace "X" with "."

-C01

-C01.zipfile

V 1.00.001-C01, 2017 Nov 03

1.Initial Version







  • No labels