Date Posted | Version | Release Package | Document Version | Release Note |
---|
|
|
| NEO IDG_Rev 130.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.56.docx | 1. Support QuickChip mode: a. TransArmor TDES MSR and BIN white list. b. AppleVAS and SmartTap2.1. c. iPhone/ Android Phone check function. (tags DFEF7A/ DFEF7B) 2. JIRA issues: CS-1563/ CS-1575/ CS-1589/ TS-9598/ TS-9599/ TS-9986/ TS-9987 |
2017/08/04 | VP3300 Bluetooth NEO v1.01.050 | | NEO IDG_Rev 111.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.35.docx | VP3300 Bluetooth NEO v1.01.050 1. Fixed JIRA issues: FUI-210: After AT cmd 02-01 (or 02-40) was timeout -> sent AT cmd again, AT cmd can not work anymore. FUI-211: Activate transaction(02-01) or (02-40) then Tap VISA qVSDC card -> Activate transaction again -> Reader return status code 0x0B |
2017/08/02 | VP3300 Bluetooth NEO v1.01.049 | | NEO IDG_Rev 111.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.35.docx | VP3300 Bluetooth NEO v1.01.049 1. Fixed JIRA issues: TS-6106/CS-1121/GRN-87: VP4880C - FW#28| Slow transaction for both MC and Visa cards BTM-33: Bootloader version error BTM-32: Cmd C7-30, response error 0x03 (Unknown Sub-Command) BTM-31: Reader have short beep twice and 1 long beep sometimes when tap Master Card Mchip BTM-30: Activate transaction-> Tap Master Card-> Don't remove card and activate transaction again, no response returned BTM-29: Card shall not be read in activating a transaction when it has not been removed from RF field since the previous transaction was done BTM-28: Reader returned status code as 0x08 (Timeout) when set Friendly Name of BLE (30-12) 2. Support PIN Variant. VP3300 Bluetooth-BL-V3.00.012 1. Fixed JIRA issues: BTM-33: Bootloader version error |
2017/07/26 | VP3300 NEO v1.01.048 | | NEO IDG_Rev 111.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.34.docx | VP3300 Bluetooth NEO v1.01.048 1. Support SmartTap 2.1 2. reader return status code 0xA3 when get Activate transaction and user insert CT card. 3. Update FW version and naming: FW version : NEO v1.01 -> VP3300 Bluetooth NEO v1.01 FW full version : BTPAY MINI NEO v1.01.xxx -> VP3300 Bluetooth NEO v1.01.xxx HW_VERSION : HW,VPBTPay Mini\r\nK21F Rev -> HW,VP3300 Bluetooth\r\nK21F Rev 4. Update USB product string: product string : BTPay mini -> VP3300 Bluetooth 5. Fixed JIRA issues: BTM-22: pull card befor 60-10 finished,btpay mini will alway response 0x0c BTM-23: set burst mode off,auto poll on,tap a card with data,then tap a card without data,use(03-40),reader will return wrong data BTM-24: device_setBurstMode(2):(04-00 fff7-02),when set burst mode auto exit,reader works as burst mode always on BTM-25: (60-14),card seated state may not be proper BTM-27: connect android sdk with usb,reader will not response (60-11 60-12) when startTransaction timeout BTM-28: Reader returned status code as 0x08 (Timeout) when set Friendly Name of BLE (30-12) SBMAS-73: emv_startTransaction():will have little chance that can't decode the tlv of response VP3300 USB-BL-V3.00.011 1. Update BL version: BL version : BTPAY_MINI-BL-V3.00.xxx -> VP3300 Bluetooth-BL-V3.00.xxx 2. Update USB product string: product string : ID TECH BTPay mini -> VP3300 Bluetooth
|
2017/06/22 | VP3300 NEO v1.01.047 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.047 1. Change BTPay Mini project name to VP3300 |
2017/05/19 | BTPAY MINI NEO v1.01.046 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.046 1. Fixed JIRA issues: SBMAS-64: when burst mode on,emv degrade to magstripe failed SBMAS-67: ctls_setConfigurationGroup(04,03):add 20 group and 0409 will return 0x62 BTM-21: Set Burst mode on-> Contact Start Transaction (60-10)_Failback supported-> Fail on ICC reading-> Swipe MSR card-> Reader returned MSR data as payload frame |
2017/05/18 | BTPAY MINI NEO v1.01.045 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.045 1. Fixed JIRA issues: SBMAS-59: device_sendDataCommand();sdk crash when send a long data BTM-20: Power off -> Connect PC & BTPay mini via USB -> Get FW version of BLE (30-13) -> Reader return timeout Note: There is no version 044. |
2017/05/08 | BTPAY MINI NEO v1.01.043 | | NEO IDG_Rev 108.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx | NEO v1.01.043 1. Fixed JIRA issues: SBMAS-10: ctls_removeApplicationData():this api does not work SBMAS-21: emv_startTransaction():when the 9f02 is illogical in tag,not return error. SBMAS-23: remove non-existent record,return value of some api is not right SBMAS-27: msr_startMSRSwipe(),then msr_cancelMSRSwipe() without tap a card ,sdk can't recevie response from btpay mini SBMAS-36: device_sendDataCommand():after send a long command to bypay mini,it will always return 0x0b SBMAS-43: device_setBurstMode():when burstmode on,can still do transaction SBMAS-58: burst mode on:after reconnect usb ,the burst data in demon unstable SBMAS-57: device_getTransactionResults():with usb ,when burst mode on and auto poll on ,call this api twice time will make reader disconnect 2. Fixed that SDK could not receive any response from reader after send 04-0A. |
2017/04/26 | BTPAY MINI NEO v1.01.042 | BTPAY MINI NEO v1.01.042.zip | NEO IDG_Rev 108.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.042 1. Fixed JIRA issues: BTM-19: After sent cmd 02-01 or 02-40 -> waited for cmd timeout, reader returned response frame w/ status code "08" (Timeout) twice. |
2017/04/24 | BTPAY MINI NEO v1.01.041 | BTPAY MINI NEO v1.01.041.zip | NEO IDG_Rev 108.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.041 1. Fixed JIRA issues: BTM-18: Data length of "Enhanced Encrypted MSR Data" is incorrect when get transaction result (03-40) |
2017/04/20 | BTPAY MINI NEO v1.01.040 | BTPAY MINI NEO v1.01.040.zip | NEO IDG_Rev 108.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.040 1. Fixed JIRA issues: BTM-4: Activate transaction(02-40)--> Tap ViVOtech test card ---> Some bytes of Track 1 data are missed BTM-5: Auto poll ---> Get transaction result (03-00) ---> Tap ViVOtech test card ---> Track 2 data have garbage BTM-6: Reader returned status code '00' after sent cmd 04-00 to set tag DFEF25 w/ invalid data. BTM-7: Encryption ON but w/o key, after sent cmd 02-40 -> swiped ISO4909 card, reader returned tag DFEF4D w/ incorrect data. BTM-8: Encryption ON, after sent cmd 60-10 -> waited until cmd timeout, reader returned KSN that was increased. BTM-9: Encryption ON, after sent cmd 02-40 -> tapped INTERAC card, reader returned nothing. BTM-10: Encryption ON (flag = 02), after tapped ViVOtech card -> sent cmd 03-40, reader returned tags FFEE13/ FFEE14 w/ strange data. BTM-11: Mobile phone had connected w/ reader via Bluetooth, after powered off/ on reader -> PC sent cmd, reader reboot automatically. BTM-12: After sent cmd 02-01 -> tapped iPhone w/ Panera Bread card (but reader may be failed to read it), reader returned nothing and LED 0 was become off. BTM-13: Enable Encryption = 0x03 -> Tap qVSDC -> Get transaction result 03-40 -> Reader returns incorrect value of tag DFEF4C & DFEF4D BTM-14: Enable Encryption = 0x03 -> Swipe MSR test card -> Get transaction result 03-40 -> Tag DFEF4C & DFEF4D are not returned BTM-15: Reader retruns incorrect track data format when activate transaction (02-01) and tap SamsungPay MST. BTM-16: After sent cmd 02-40 -> tapped card, sometimes reader did not read cards (Discover/ MChip) successfully. |
2017/03/20 | BTPAY MINI NEO v1.01.039 | BTPAY MINI NEO v1.01.039.zip | NEO IDG_Rev 107.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx | NEO v1.01.039 1. Fixed JIRA issues: BTM-01, BTM-02 and BTM-03. 2. Add timeout feature for 30-10, 30-11 and 30-12. if user send those 3 commands to BLE via USB but BLE connected to any bluetooth device, reader send timeout(0x08) in 5 seconds. 3. Fixed TS-4926. |
2017/02/24 | BTPAY MINI NEO v1.01.038 | BTPAY MINI NEO v1.01.038.zip | NEO IDG_Rev 107.doc
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.28.docx | NEO v1.01.038 1. Add commands: Get BLE Address (30-10) Get Friendly Name of BLE (30-11) Set Friendly Name of BLE (30-12) Note: this version do not meet the comments for tag DFEF4D, NEO IDG Rev 106. |
2016/12/14 | BTPAY MINI NEO v1.01.037 | BTPAY MINI NEO v1.01.037.zip | NEO IDG_Rev 101.doc NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx | NEO v1.01.037 1. Release. |