FW_BTpay mini F/W release

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx

NEO v1.01.043
1. Fixed JIRA issues:
SBMAS-10: ctls_removeApplicationData():this api does not work
SBMAS-21: emv_startTransaction():when the 9f02 is illogical in tag,not return error.
SBMAS-23: remove non-existent record,return value of some api is not right
SBMAS-27: msr_startMSRSwipe(),then msr_cancelMSRSwipe() without tap a card ,sdk can't recevie response from btpay mini
SBMAS-36: device_sendDataCommand():after send a long command to bypay mini,it will always return 0x0b
SBMAS-43: device_setBurstMode():when burstmode on,can still do transaction

2. Fixed that SDK could not receive any response from reader after send 04-0A.

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.042
1. Fixed JIRA issues:
BTM-19: After sent cmd 02-01 or 02-40 -> waited for cmd timeout, reader returned response frame w/ status code "08" (Timeout) twice.

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.041
1. Fixed JIRA issues:
BTM-18: Data length of "Enhanced Encrypted MSR Data" is incorrect when get transaction result (03-40)

NEO IDG_Rev 108.doc

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.040
1. Fixed JIRA issues:
BTM-4: Activate transaction(02-40)--> Tap ViVOtech test card ---> Some bytes of Track 1 data are missed
BTM-5: Auto poll ---> Get transaction result (03-00) ---> Tap ViVOtech test card ---> Track 2 data have garbage
BTM-6: Reader returned status code '00' after sent cmd 04-00 to set tag DFEF25 w/ invalid data.
BTM-7: Encryption ON but w/o key, after sent cmd 02-40 -> swiped ISO4909 card, reader returned tag DFEF4D w/ incorrect data.
BTM-8: Encryption ON, after sent cmd 60-10 -> waited until cmd timeout, reader returned KSN that was increased.
BTM-9: Encryption ON, after sent cmd 02-40 -> tapped INTERAC card, reader returned nothing.
BTM-10: Encryption ON (flag = 02), after tapped ViVOtech card -> sent cmd 03-40, reader returned tags FFEE13/ FFEE14 w/ strange data.
BTM-11: Mobile phone had connected w/ reader via Bluetooth, after powered off/ on reader -> PC sent cmd, reader reboot automatically.
BTM-12: After sent cmd 02-01 -> tapped iPhone w/ Panera Bread card (but reader may be failed to read it), reader returned nothing and LED 0 was become off.
BTM-13: Enable Encryption = 0x03 -> Tap qVSDC -> Get transaction result 03-40 -> Reader returns incorrect value of tag DFEF4C & DFEF4D
BTM-14: Enable Encryption = 0x03 -> Swipe MSR test card -> Get transaction result 03-40 -> Tag DFEF4C & DFEF4D are not returned
BTM-15: Reader retruns incorrect track data format when activate transaction (02-01) and tap SamsungPay MST.
BTM-16: After sent cmd 02-40 -> tapped card, sometimes reader did not read cards (Discover/ MChip) successfully.

NEO IDG_Rev 107.doc 

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx

NEO v1.01.039
1. Fixed JIRA issues: BTM-01, BTM-02 and BTM-03.
2. Add timeout feature for 30-10, 30-11 and 30-12. if user send those 3 commands to BLE via USB but BLE connected to any bluetooth device, reader send timeout(0x08) in 5 seconds.
3. Fixed TS-4926.

NEO IDG_Rev 107.doc 

NEO IDG Supplement for UniPay III and UniPay 1.5 v1.28.docx

NEO v1.01.038
1. Add commands:
Get BLE Address (30-10)
Get Friendly Name of BLE (30-11)
Set Friendly Name of BLE (30-12)

Note: this version do not meet the comments for tag DFEF4D, NEO IDG Rev 106.

NEO IDG_Rev 101.doc 

 NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx

NEO v1.01.037
1. Release.