Table of Contents

Target Project:

PISCES, AR 2.1.5, 2015

Test Instruction : 80143001-TI

Version	Date	Description
Rev

C

Unsigned

09 Nov 2020

goofy.liu

Major Updated – TQM-Audit Test Standard

1.

[TQM

RFID Test

]

Item Scope:

(A) RFID Test

(B) ICC Test

TI which Neil & Vito Signed

Rev B - N/A

N/A

Rev A.docx

10 Nov 2017

Initial Release

2017 Nov 10

Presented by goofy.liu

MISC documents

ItemDateComment

01 - Key Injection SOP.doc

10 Jan 2018

goofy.liu

VP8800 Key Loading SOP, based on PKI architecture.

02 - Firmware : TS Version Table

21 Feb 2020

goofy.liu

IDPP-1881-A , FW: 25695 --> TS158 V1.01.006-C02

IDPP

1.1 Subtest 01 : Type A(0cm + 4cm) Subtest 02 : Type B(0cm + 4cm) Image Added 1.2 Type B Card, Item Number in Arena = N/A. 2.ICC Test 2.1 Test Items :Get ATR + APDU Exchange 2.2 ICC Test Card Item Number = 80005206-004 Image Added
Rev C_Signed.	21 Jun 2019	goofy.liu 1.[TQM Test] Item Scope: (A) RFID Test (B) ICC Test TI which Neil & Vito Signed
Rev B - N/A	N/A	N/A
Rev A.docx	10 Nov 2017	Initial Release 2017 Nov 10 Presented by goofy.liu

MISC documents

Item

Date

Comment

01 - Key Injection SOP.doc

10 Jan 2018

goofy.liu

VP8800 Key Loading SOP, based on PKI architecture.

02 - Firmware : TS Version Table

21 Feb 2020

Version

Date

Comment

Verified FW, Software, SQ

V 1.01.008

goofy.liu

IDPP-1881-A , FW: 25695 --> TS158 V1.01.006-C02
IDPP-1881D-B , FW:25695-1 --> TS158 V1.01.006-C02
IDPP-1881-U1-56, FW:25259 --> 請用 TS158 V1.01.004-C01 DA version (V1.01.004-C01)

RE TS158VP8800 - IDPP-1881-U1IDPP-1881D-U1 V1.01.004-C01 Released Specific QC Mode wo MSR..msg

MSR Test IDG Command

FW1

FW2

25259

25695

02-40

Yes

2C-20

No

Yes

Download Link

	FW1	FW2
	25259	25695
02-40	Yes	Yes
2C-20	No	Yes

03 - Specific Part Numbers , United Airline

IDPP-1881D-U1:

IDPP-1881-U1:

26 Feb 2021

goofy.liu

<USDK-PKI, Demo><Client Certs>

United Airline certificates loading process.

1.Device Signing and IDTech Certs

2.SMFG Load Client Certs (from CA Server)

3.Allowed Demo S/N Range : 880Z000001~880Z000020

Image Added

Download Link

Version

Date

Comment

Verified FW, Software, SQ

V 1.01.010

SQA Test Ticket:

Jira Legacy

server	System JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-657

-C01.zip

19 Feb 2021

goofy.liu

V1.01.010-C01 . 2020 Feb 19, goofy_liu,
1.[Network Test] Fixed Static IP Setting Issue.
Adding Gateway Settings.

==[DUT]===
IP Addr = 192.168.99.10
Subnet Mask = 255.255.255.0
Gateway = 192.168.99.1
==[PC]===
IP Addr = 192.168.99.9
Subnet Mask = 255.255.255.0
Gateway = 192.168.99.1

V 1.01.009

SQA Test Ticket:

Jira Legacy

server	System JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-657

1.Legacy P/N Updated, QC-US mode has been added.
IDPP-1X81X :
Primary Interface: USB-HID
QCUS [Full Test], Both Intfs (RS232,USB-HID)
Keys: [+] LCL-KEK; PIN KEY; DEK;

IDPP-1881 :
Primary Interface: USB-HID.
QCUS [-] RS232;
Keys: [+] LCL-KEK; PIN KEY; DEK;

IDPP-1881D :
Primary Interface: USB-HID.
QCUS [-] RS232;
Keys: [+] LCL-KEK; PIN KEY; DEK;
----------------------------------------
IDPP-1881D-U1:
Primary Interface: USB-HID.
QCUS [-] RS232; MSR;
Keys: [+] LCL-KEK; PIN KEY; DEK;

IDPP-1881-U1 :
Primary Interface: USB-HID.
QCUS [-] RS232; MSR;
Keys: [+] LCL-KEK; PIN KEY; DEK;

V 1.01.008

-C06.zip

28 Oct 2020

goofy.liu

1.P/N Updated:

[M] IDPP-1880-M1 :

old: QC mode, LCL-KEK, PIN KEY.

new: QC mode, LCL-KEK.

SQA Test JIRA : TE-437

-C05.zip

28 Oct 2020

goofy.liu

1.Touch Panel Issue Fixed.

Root: Complex drawing signature needs more time & buffer size

Resolution:

1.A Signing Timeout up to 60 seconds.

1.B Add-up Receiving Buffer size to 20K

Developer Note:

More Buffer size(~20k = ClassDevRS232.m_cnRX_BUF_MAX),

USB-HID dll max buf size check

SQA Test JIRA : TE-437

-C04.zip

27 Oct 2020

goofy.liu

1.[Fixed Issue]

Visa-TQM Audit Issue - RFID Test.

old : 0cm+4cm && CL Type A , 2-subTest required.

new : 0cm+4cm && CL Type A+B , 4-subTest required.

Test Request JIRA:

Jira Legacy

server	System JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-437

-C03.zip

23 Oct 2020

goofy.liu

1.P/N Updated

(+) IDPP-1880D-M1: (Demo Version)

a.Secure Keys Checking Rules

QC-Mode : PKI KEK, PIN Key, Data Key(DEK)

QCUS-Mode : PKI KEK, PIN Key, Data Key(DEK)

Test Request JIRA:

Jira Legacy

server	System JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-437

-C02.zip

29 Sep 2020

goofy.liu

1.P/N Updated

(+) IDPP-1880-M1:

a.Secure Keys Checking Rules

QC-Mode : PKI KEK, PIN Key

QCUS-Mode : PKI KEK, PIN Key, Data Key(DEK)

----------------------
2. Summary Log Access @ First Time Startup.
Current: Log File Name not ready, can't be accessed. -->
+ Log File bar (open log function) at top of window.
3.Update USB-HID Interface Functions, IDT_USB_HID_32bit.dll.
Ignored UI Event Frame to make TS be happy.
Frame : 45 00 55 ## Len_1B ...

4.Adding MSR Swipe Result (2C-20) Tracks Information,
check NEO2.0 's MSR Test Similar behavior.
Ex:
------[Reader, Passed]------
MSR Card type = Other
(Bit 0) Tk1 Decode : Okay
(Bit 1) Tk2 Decode : Okay
(Bit 2) Tk3 Decode : Okay
(Bit 3) Tk1 Data : Found
(Bit 4) Tk2 Data : Found
(Bit 5) Tk3 Data : Found
Field 10 -optional bytes length : N/A

------[Reader, Failed]------
MSR Card type = Other
(Bit 0) Tk1 Decode : Okay
(Bit 1) Tk2 Decode : Failed <--- Err,need 3 Tks
(Bit 2) Tk3 Decode : Okay
(Bit 3) Tk1 Data : Found
(Bit 4) Tk2 Data : N/A <--- Err, need 3 Tks
(Bit 5) Tk3 Data : Found
Field 10 -optional bytes length : N/A

--------

Note01: Requested e-mail - RE Please Help To Resign_VP8800.msg

SQA Approval JIRA :

Jira Legacy

server	System JIRA
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-399

Kate Hung 05 Oct 2020

[VP8800][TS158] V1.01.008-C02 -- Test result.msg

-C01.zip

24 Jun 2020

goofy.liu

1.Updated 81-0C Get Key Slot IDG Command Parser.
Verified: [FWInfo] = FW, Full FW, vKH0 AR 3.0.0.D Build:26264
2.Summary Log (.\Logs\Summary\XXX.log) being Supported.

Ex: Summary Log Example

Image Added

=========================================

V1.01.007-C01 . 2019 Feb 21, goofy_liu,

1.Quisda ICC Loop Test Improvement.
2.QC-US mode added
3.S/N format enhancement check.

V 1.01.006

-C02.7z

12 Jun 2019

goofy.liu

1.Added Device Reset Failed Check (90-07+90-00) before Tamper Enable(90-02) @ Tamper Check Item.

Kate Hung 24 Jun 2019

RE TS158VP8800 V1.01.006-C02 Released.msg

-C01.7z

11 Jun 2019

goofy.liu

---<Firmware Image Information>---

===========================

[ProcessorType] = ARMR CortexR-A7 core / iMX6UL

===========================

[FWInfo] = FW, Full FW, vKH0 AR 3.0.0.D Build:25680

OS, Linux, v3.14.58

1.P/N Updated List,

[M] IDPP-1881D-U1; IDPP-1881-U1;

Objective:

MSR Test @ QC Mode is now available since IDG Command 2C-20 Swipe MSR is ready.

2.MAC Address Set Command being changed.

old: D1-16

new: 90-14 (ONLY available in UMFG mode)

3.Test Items removed.

(a) Settings, Production + QC modes.

V 1.01.005

-C02.zip

25 Feb 2019

25 Feb 2019 goofy.liu

1. Removed/OBS PNs

IDPP-1381 :　RS232.

IDPP-1381D :　RS232.

IDPP-1581 :　USB-HID.

IDPP-1581D : USB-HID.

2. Customized Part Numbers w/ Specific Firmware Version

[Note] Please use Firmware Version D_U1_r25259,

IDPP-1881D-U1, No MSR Test @ QC mode since r25259 w/o 2C-20 SMFG mode Support.

IDPP-1881-U1, No MSR Test @ QC mode since r25259 w/o 2C-20 SMFG mode Support.

PNList_V1.01.005-C02

-C01.zip

23 Feb 2019

23 Feb 2019 goofy.liu

V1.01.005-C01 .D_U1_r25259, 2019 Feb 23, goofy_liu,

1.P/N List Updated

Updated ALL P/Ns' Production Tests w/ Full Test Items from this version

since Battery Absense Issue can't be detected by Firmware and No Repower On behavior in certain part number (specially for -U1 Part Number).

2.Tamper Test Scenario @ Production Mode.

Adding Re-power ON step to prevent from RTC/Battery Absence Issue.

V1.01.005-C01_PNList

V 1.01.004

-C01

01 Feb 2019

01 Feb 2019 goofy.liu

V1.01.004-C01 .D_U1_r25259, 2019 Jan 31, goofy_liu,

1.For FW Build:25259 DA Version

P/N List Updated.

Temporarily Removed QC Mode MSR Test

@ IDPP-1881D-U1.

@ IDPP-1881-U1.

2.+ File Info Version = ReleaseNote.txt the latest version validation check.

If NOT allowed, then [Exit] Directly !!

V 1.01.003

-C03

11 Sep 2018

11 Sep 2018 goofy.liu

1.Fixed RS232 Test if useing IDPP-1X81 + USB-HID connection.

[VP8800][TS158] V1.01.003-C03.msg

-C02

10 Sep 2018

10 Sep 2018 goofy.liu

1.Update Tamper Test.

+ USB Connection check prior to Tamper test start.

-C01

10 Sep 2018

10 Sep 2018 goofy.liu

1.Update Tamper Test.

V 1.01.002

-C01

24 Jul 2018

24 Jul 2018 goofy.liu

1.Part Number List Update

+IDPP-1881D-U1

2.QC Mode Secure Info - Injection Keys Check Rule Update

IDPP-1381D = IDPP-1581D = IDPP-1881D = IDPP-1881D-U1 = LCL-KEK(14)+Data Encrytion Key(02)+PIN Key(01)

IDPP-1381 = IDPP-1581 = IDPP-1881 = IDPP-1881-U1 = LCL-KEK(14)

3.Support MSR Test Command 2C-20 to All FW Verison.

Error: Kate reported V1.01.001-C01 has limited ONLY to Build:25269

Correct: To all FW builds.

V 1.01.001

-C01

22 Jun 2018

22 Jun 2018 goofy.liu

1.[QC mode] support 2C-20 MSR Test , don't care key status.

FW Build: 25269 or later version.

RE VP8800 TS158 V1.01.001-C01 for MSR Test @ QC mode FW Build 25269.msg

V 1.00.009

-C02

22 Jun 2018

22 Jun 2018 goofy.liu

1.Update Keys & Certificate Check method @ QC mode.

Smart Check Injected Keys.

2.No MSR Test in QC mode.

This function will be supported 2C-20 cmd for MSR Test .

QC mode (Activated,Keys Installation) in next release w/ Firmware Build 25269.

-C01

13 Jun 2018

13 Jun 2018 goofy.liu

1.Update Tamper Check Scenario, Remove Repower-On UUT

Using 90-02 w/o S/N --> Work in Tamper Test Scenario.

2.USB-HID test, + Repower-On UUT.
3.Perform S/N Injection after All Test Items.

V 1.00.008

-C03

08 Jun 2018

08 Jun 2018 goofy.liu

1.[Exclusive in IDPP-1381,IDPP-1381D]

Update Tamper Repower-On Message to ask

user/operator to press [OK] after UUT beeps and being in Ready Status.

-C02

07 Jun 2018

07 Jun 2018 goofy.liu

1.Fixed S/N input issue.

-C01

06 Jun 2018

06 Jun 2018 goofy.liu

Approved in Build FW: 25252, Demo Version

1.Verified New MSR Format, w/ LRC

Test Card:

TRACK 1 = %TRACK17676760707077676760707077676760707077676760707077676760707077676760707?C

TRACK 2 = ;2121212121767676070707767676762121212?0

TRACK 3 = ;33333333337676760707077676763333333333767676070707767676333333333376767607070776767633333333337676760707?2

~~~~~~

Q-Card:

TRACK 1 = %0123456789012345678901234567890123456789012345678901234567890123456789012345?:

TRACK 2 = ;0123456789012345678901234567890123456?2

TRACK 3 = ;01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123?4

2.Isolated Secure Info Item @ QC mode
3.Isolated Customized Config Item @ Production + QC mode.
4.Rename exe file

old: TS158_PISCES_NoExt.exe

new: TS158_VP8800_NoExt.exe

5. P/N configuration Update for MSR Test at QC mode.

= MSR Test Available since Data Key Exists

= MSR Test N/A since No Data Key Exists

Production P/N - MSR item at QC mode

------------------------------------------------------------

IDPP-1381 - MSR

IDPP-1581 - MSR

IDPP-1881 - MSR

IDPP-1881-U1 - MSR

IDPP-1X81X - MSR

Demo P/N - MSR item at QC mode

------------------------------------------------------------

IDPP-1381D - MSR

IDPP-1581D - MSR

IDPP-1881D - MSR

V 1.00.007

-C04

03 May 2018

03 May 2018 goofy.liu

1.Update Items for IDPP-1881-U1, Customer : United Air Line

a.Remove RS232 Item @ IDPP-1881-U1

b.Add United Cert Check "0F" @ IDPP-1881-U1, QC Mode

c.Remove Key Checks: PIN Key; DUKPT (Data) Key;

d.Remove MSR @ QC mode, since only LCL-KEK, w/o DUKPT & PIN

-C03

30 Mar 2018

30 Mar 2018 goofy.liu

verified w/ FW build:25041~

1.Ethernet Ping - Add Netmask 255.255.255.0

2.Update P/N

Replace half size "-" with full size "-".

-C02

29 Mar 2018

29 Mar 2018 goofy.liu

verified w/ FW build:25016

1.Production Mode, Device Reset

Add Device Reset in MSR; RFID; ICC

since Tamper Test might stay in Tamper Eanble status

(Generation CSR) to produce MSR Act Txn Error w/ returning sts 0x0A immediately.

2.Tamper Test:

Update Tamper Eanble / Disable Command Group

old: 04-21 + 01 / 04-21 + 03

new: 90-07;90-00;90-02 / 90-07;90-00

3.QC Mode, LCD Test.

Add LCD Cust Display Mode ON --> Show Default Image --> Cust Mode OFF

to display LCD Test Patterns.

4.Add UMFG-SN before Tamper Test. Copied from NEO 2.0 test plan.
5.P/N Update
+ IDPP-1881-U1, RS232 + USB-HID + Ethernet

-C01

23 Mar 2018

23 Mar 2018 goofy.liu

verified w/ FW build:25016

1.+MSR, LEDs+Buzzer, and LCD Tests in QC mode.
2.Re-power UUT after Tamper Enable(90-02),

for Tamper-Battery test.

3.Secured Keys Check Rule in All P/Ns.

They are LCL-KEK, DUKPT Key, and PIN Key.

4.P/N Check Rules Update

a) RS232

b) USB-HID

c) USB-HID+ ETH

d) RS232+ USB-HID+ ETH

5.Add Get Certs (81-0E) Info Check @ FW Info QC mode.
6.[Fixed] 2018 Feb 02, HW Tony's Report.

Wire 1 <--> 0 message displays reversed.

Printing out detail info when Engineer Mode w/ Debug "ON".

1.New Request - Tamper Enable, Lewis

RE Tamper verification for NEO 2 and VP8800 - TS improvement schedule..msg

2.SQA Report.msg

V 1.00.006

-C01

01 Feb 2018

01 Feb 2018 goofy.liu

1.Date/Time Test : Time Zone Update

old = GMT/UTC + 08:00

new = GMT/UTC + 00:00

since NEO 2.0 Certificates Injection Tool

sets UTC +00:00 as standard time in the reader.

Old Time zone may cause Time Check Error in QC mode.

V 1.00.005

-C03

25 Jan 2018

25 Jan 2018 goofy.liu

1.Tamper Item Update

a.Add Tamper Enable / Disable Functions before and after "Get Tamper Status".

b.Fixed Incorrect Tamper Info.

-C02

17 Jan 2018

17 Jan 2018 goofy.liu

1.Remove Board Level Test Icon (BTM-XX..)

2.Add Delay 500m between MSR Test and RFID one.

To provide more restoration time of 02-05 command

after 1st time Erase Flash.

3.Update FW Info display message

Old: "..TM4.."

New: "NEO 2.0 / AR 3.0.0 +..."

4.Update Part Number List.

5.Verified @ FW V24089

-C01

12 Jan 2018

12 Jan 2018 goofy.liu

V1.00.005-C01, 2018 Jan 11 Released

1.QC mode, PCI enable

a-removed test items

a.1-MSR test, KSN issue

b-Tamper Test Update -

Remove Tamper Enable while in QC mode

c.USB-HID Test Update

2.MSR test item.

Legacy: 02-20 (Interface selectable, Non-secured)

New: 02-05 (Interface selectable, Secured/Non-secured compatible)

3.RTC, Data/Time Set commands

Legacy 25-05

New,UMFG mode, 90-07 --> 90-00 --> 90-01

4.Engineer Mode,

UMFG / SMFG Features Support

a.Load Certificates Support @ Engineer Mode

b.Load Keys Function Support @ Engineer Mode

c.QC Mode, item name update:

Legacy,Err "G53 MCD Chk" -->

Ok "G53 MCU Chk"

5.Part Number List Update

M IDPP-1X81 --> IDPP-1X81X

+ IDPP-1381.D RS232 (115200), No USB-HID, No Ethernet

+ IDPP-1581.D, No RS232, USB-HID, No Ethernet, SRED

+ IDPP-1881.D, No RS232, USB-HID, Ethernet, SRED

Verified with FW V.24793

V 1.00.004

-C01

1.Part Number List Update

+) IDPP-1381, RS232 (115200), No USB-HID, No Ethernet

+) IDPP-1581, No RS232, USB-HID, No Ethernet

+) IDPP-1881, No RS232, USB-HID, Ethernet

+) IDPP-1X81, RS232, USB-HID, Ethernet

-) IDPP-1XX, the legacy one.

2.Rename USB_HID_IDTW.dll to USB_HID_IDTW_32bit.dll

V 1.00.003

V1.00.003-C03

21 Mar 2017

=========================================

V1.00.003-C03, 2017 Mar 21 Released

1.Tamper more check and user confirm, since Tamper Enable behavior ONLY has ONE Chance

2.Remove Tamper Enable in RTC/Date & Time Set

3.Remove 09-14 in AR Platform in Connection

=========================================

V1.00.003-C02, 2017 Feb 23 Released

1.Eng Mode - Add Enter Bootloader Mode.

2.[Time Check]Remove Tamper Enable Cmd

before Time Check Cmds Performing, in Time Check Item.

3.[LCD Pixels] Combined 3 kinds of LCD Test Sub Items into one.

Each display has 800 ms interval time to next one.

Old: ON, Click [PASS] --> OFF, Click [PASS] --> Color Bars, Click [PASS]

New: ON->OFF->Color Bars->Again (10 secs period) , Click [PASS]

4.[Ethernet] Set After Test.

Old: Ethernet MAC Injection --> Ethernet Ping Check

New: Ethernet Ping Check --> Ethernet MAC Injection

5.[Start All Test][Run As Administrator]

Add 1st round notification regarding "Run As Administrator".

6.[Keypad test] - Add Cust Disp ON --> OFF to avoid Keypad no response problem.

FW:23558

V1.00.003-C01

1.RTC Timer Set / Get = 25-05 / 25-06

2.Add Ethernet MAC Address Injection / Check Item

3.[UI,Form04] Adjust Test Item Buttons Maxtrix Area sizing to all buttons view range.

4.Keypad Test Item Update

SW = r23240

SQA = ?

V 1.00.002

V1.00.002-C03

Internal Test

V1.00.002-C03, 2016 Dec 14 Released

1.Add "Administrator Privilege" in manifest.xml definition.

V1.00.002-C02

Internal Test

V1.00.002-C02, 2016 Dec 13 Released

1.Modified LED Display Message

V1.00.002-C01

Internal Test

V1.00.002-C01, 2016 Dec 08 Released

--< Mod >--

1.Network Ethernet Interface Setting Cmd D1-13 Tx/Rx Format Updated

2.[Eng Mode], Some Test Buttons are not cleared after disconnection.

3.KeyPad Test - Cancel Function Ready but still takes time to end (1~4 secs).

Timeout Value Per Pressing Delay , 50 secs --> 4 secs.

4.Formal Part Number Added

+IDPP – 138

*V1.00.001-C03, HWOnly

2016 Nov 08

V1.00.001-C03

HW Test Tool

V 1.00.001

*V 1.00.001-C03

Formal Release

V1.00.001-C03

Formal Release for ..

1.Board Level Test

2.Production Test

3.QC Mode Test

V1.00.001-C01

PISCES, Beta 1 Version

V 0.00.0XX

V 0.00.006-C01

TS158, V0.00.006-C01

PISCES, Beta 1 Version

SetupTS158_0.00.005-C10.exe

V0.00.005-C10, 2016 Sept 07 Released

1.Mod - Tamper Test, Replace messages "Can't Get Tamper Status" with "Get Tampers Done with OK, All OFF"

~~2.Mod - USB Connection, Make MSR Test Duration from 2.2s downto 0.3s response time.~~

SetupTS158_0.00.005-C09.exe

V0.00.005-C09 Released, Sept 06

1.Tamper Test Forever Loop Bugs

2.Tamper Value Display

SetupTS158_0.00.005-C08.exe

V0.00.005-C08 Released, Sept 05

1.Message Changed. Tamper 2,3 --> Wire 0,1

SetupTS158_0.00.005-C07.exe

V0.00.005-C07 Released, Sept 02

1.Modified Tamper Get Status Value.

2.De-activate RFID Interface After Poll For Token.

SetupTS158_0.00.005-C06.exe

V0.00.005-C06 Released

1.Touch - Signature Simplification
2. RS232 connection - Reader Detection Failed Problem

SetupTS158_0.00.005-C04.exe

---<005-C04>---

SetupTS158_0.00.005-C02.exe

---<005-C02>---

SetupTS158_0.00.005.exe

---<005-C01>---

SetupTS158_0.00.004.exe

---<C004>---

SetupTS158_0.00.003.exe

---<C003>---

SetupTS158_0.00.002.exe

---<C002>---

SetupTS158_0.00.001.exe

---<C001>---

Table of Contents

Target Project:

PISCES, AR 2.1.5, 2015

Image Added

Test Instruction : 80143001-TI

Version	Date	Description
Rev C_Signed.docx	21 Jun 2019	goofy.liu 1.[TQM Test] Item Scope: (A) RFID Test (B) ICC Test TI which Neil & Vito Signed
Rev B - N/A	N/A	N/A
Rev A.docx	10 Nov 2017	Initial Release 2017 Nov 10 Presented by goofy.liu

MISC documents

Item

Date

Comment

01 - Key Injection SOP.doc

10 Jan 2018

goofy.liu

VP8800 Key Loading SOP, based on PKI architecture.

02 - Firmware : TS Version Table

21 Feb 2020

goofy.liu

IDPP-1881-A , FW: 25695 --> TS158 V1.01.006-C02
IDPP-1881D-B , FW:25695-1 --> TS158 V1.01.006-C02
IDPP-1881-U1-56, FW:25259 --> 請用 TS158 V1.01.004-C01 DA version (V1.01.004-C01)

RE TS158VP8800 - IDPP-1881-U1IDPP-1881D-U1 V1.01.004-C01 Released Specific QC Mode wo MSR..msg

MSR Test IDG Command	FW1	FW2
	25259	25695
02-40	Yes	Yes
2C-20	No	Yes

Download Link

Version

Date

Comment

Verified FW, Software, SQ

V 1.01.008

-C03.zip

23 Oct 2020

goofy.liu

1.P/N Updated

(+) IDPP-1880D-M1: (Demo Version)

a.Secure Keys Checking Rules

QC-Mode : LCL-KEK, PIN Key, Data Key(DEK)

QCUS-Mode : LCL-KEK, PIN Key, Data Key(DEK)

2.Visa-TQM Audit Issue - RFID Test Updated

old : 0cm+4cm && CL Type A , 2-subTest required.

new : 0cm+4cm && CL Type A+B , 4-subTest required.

SQA Approval JIRA:

Jira Legacy

server	System JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-437

-C02.zip

29 Sep 2020

goofy.liu

1.P/N Updated

(+) IDPP-1880-M1:

a.Secure Keys Checking Rules

QC-Mode : PKI LCL-KEK, PIN Key

QCUS-Mode : PKI LCL-KEK, PIN Key, Data Key(DEK)

--------

Note01: Requested e-mail - RE Please Help To Resign_VP8800.msg

SQA Approval JIRA -TE :

Jira Legacy

server	ID TECH - System JIRA
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-399

Kate Hung 05 Oct 2020

[VP8800][TS158] V1.01.008-C02 -- Test result.msg

-C01.zip

24 Jun 2020

goofy.liu

1.Updated 81-0C Get Key Slot IDG Command Parser.
Verified: [FWInfo] = FW, Full FW, vKH0 AR 3.0.0.D Build:26264
2.Summary Log (.\Logs\Summary\XXX.log) being Supported.

Ex: Summary Log ExampleImage Removed

Image Added

=========================================

V1.01.007-C01 . 2019 Feb 21, goofy_liu,

1.Quisda ICC Loop Test Improvement.
2.QC-US mode added
3.S/N format enhancement check.

V 1.01.006

-C02.7z

12 Jun 2019

goofy.liu

1.Added Device Reset Failed Check (90-07+90-00) before Tamper Enable(90-02) @ Tamper Check Item.

Kate Hung 24 Jun 2019

RE TS158VP8800 V1.01.006-C02 Released.msg

-C01.7z

11 Jun 2019

goofy.liu

---<Firmware Image Information>---

===========================

[ProcessorType] = ARMR CortexR-A7 core / iMX6UL

===========================

[FWInfo] = FW, Full FW, vKH0 AR 3.0.0.D Build:25680

OS, Linux, v3.14.58

1.P/N Updated List,

[M] IDPP-1881D-U1; IDPP-1881-U1;

Objective:

MSR Test @ QC Mode is now available since IDG Command 2C-20 Swipe MSR is ready.

2.MAC Address Set Command being changed.

old: D1-16

new: 90-14 (ONLY available in UMFG mode)

3.Test Items removed.

(a) Settings, Production + QC modes.

V 1.01.005

-C02.zip

25 Feb 2019

25 Feb 2019 goofy.liu

1. Removed/OBS PNs

IDPP-1381 :　RS232.

IDPP-1381D :　RS232.

IDPP-1581 :　USB-HID.

IDPP-1581D : USB-HID.

2. Customized Part Numbers w/ Specific Firmware Version

[Note] Please use Firmware Version D_U1_r25259,

IDPP-1881D-U1, No MSR Test @ QC mode since r25259 w/o 2C-20 SMFG mode Support.

IDPP-1881-U1, No MSR Test @ QC mode since r25259 w/o 2C-20 SMFG mode Support.

PNList_V1.01.005-C02

-C01.zip

23 Feb 2019

23 Feb 2019 goofy.liu

V1.01.005-C01 .D_U1_r25259, 2019 Feb 23, goofy_liu,

1.P/N List Updated

Updated ALL P/Ns' Production Tests w/ Full Test Items from this version

since Battery Absense Issue can't be detected by Firmware and No Repower On behavior in certain part number (specially for -U1 Part Number).

2.Tamper Test Scenario @ Production Mode.

Adding Re-power ON step to prevent from RTC/Battery Absence Issue.

V1.01.005-C01_PNList

V 1.01.004

-C01

01 Feb 2019

01 Feb 2019 goofy.liu

V1.01.004-C01 .D_U1_r25259, 2019 Jan 31, goofy_liu,

1.For FW Build:25259 DA Version

P/N List Updated.

Temporarily Removed QC Mode MSR Test

@ IDPP-1881D-U1.

@ IDPP-1881-U1.

2.+ File Info Version = ReleaseNote.txt the latest version validation check.

If NOT allowed, then [Exit] Directly !!

V 1.01.003

-C03

11 Sep 2018

11 Sep 2018 goofy.liu

1.Fixed RS232 Test if useing IDPP-1X81 + USB-HID connection.

[VP8800][TS158] V1.01.003-C03.msg

-C02

10 Sep 2018

10 Sep 2018 goofy.liu

1.Update Tamper Test.

+ USB Connection check prior to Tamper test start.

-C01

10 Sep 2018

10 Sep 2018 goofy.liu

1.Update Tamper Test.

V 1.01.002

-C01

24 Jul 2018

24 Jul 2018 goofy.liu

1.Part Number List Update

+IDPP-1881D-U1

2.QC Mode Secure Info - Injection Keys Check Rule Update

IDPP-1381D = IDPP-1581D = IDPP-1881D = IDPP-1881D-U1 = LCL-KEK(14)+Data Encrytion Key(02)+PIN Key(01)

IDPP-1381 = IDPP-1581 = IDPP-1881 = IDPP-1881-U1 = LCL-KEK(14)

3.Support MSR Test Command 2C-20 to All FW Verison.

Error: Kate reported V1.01.001-C01 has limited ONLY to Build:25269

Correct: To all FW builds.

V 1.01.001

-C01

22 Jun 2018

22 Jun 2018 goofy.liu

1.[QC mode] support 2C-20 MSR Test , don't care key status.

FW Build: 25269 or later version.

RE VP8800 TS158 V1.01.001-C01 for MSR Test @ QC mode FW Build 25269.msg

V 1.00.009

-C02

22 Jun 2018

22 Jun 2018 goofy.liu

1.Update Keys & Certificate Check method @ QC mode.

Smart Check Injected Keys.

2.No MSR Test in QC mode.

This function will be supported 2C-20 cmd for MSR Test .

QC mode (Activated,Keys Installation) in next release w/ Firmware Build 25269.

-C01

13 Jun 2018

13 Jun 2018 goofy.liu

1.Update Tamper Check Scenario, Remove Repower-On UUT

Using 90-02 w/o S/N --> Work in Tamper Test Scenario.

2.USB-HID test, + Repower-On UUT.
3.Perform S/N Injection after All Test Items.

V 1.00.008

-C03

08 Jun 2018

08 Jun 2018 goofy.liu

1.[Exclusive in IDPP-1381,IDPP-1381D]

Update Tamper Repower-On Message to ask

user/operator to press [OK] after UUT beeps and being in Ready Status.

-C02

07 Jun 2018

07 Jun 2018 goofy.liu

1.Fixed S/N input issue.

-C01

06 Jun 2018

06 Jun 2018 goofy.liu

Approved in Build FW: 25252, Demo Version

1.Verified New MSR Format, w/ LRC

Test Card:

TRACK 1 = %TRACK17676760707077676760707077676760707077676760707077676760707077676760707?C

TRACK 2 = ;2121212121767676070707767676762121212?0

TRACK 3 = ;33333333337676760707077676763333333333767676070707767676333333333376767607070776767633333333337676760707?2

~~~~~~

Q-Card:

TRACK 1 = %0123456789012345678901234567890123456789012345678901234567890123456789012345?:

TRACK 2 = ;0123456789012345678901234567890123456?2

TRACK 3 = ;01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123?4

2.Isolated Secure Info Item @ QC mode
3.Isolated Customized Config Item @ Production + QC mode.
4.Rename exe file

old: TS158_PISCES_NoExt.exe

new: TS158_VP8800_NoExt.exe

5. P/N configuration Update for MSR Test at QC mode.

= MSR Test Available since Data Key Exists

= MSR Test N/A since No Data Key Exists

Production P/N - MSR item at QC mode

------------------------------------------------------------

IDPP-1381 - MSR

IDPP-1581 - MSR

IDPP-1881 - MSR

IDPP-1881-U1 - MSR

IDPP-1X81X - MSR

Demo P/N - MSR item at QC mode

------------------------------------------------------------

IDPP-1381D - MSR

IDPP-1581D - MSR

IDPP-1881D - MSR

V 1.00.007

-C04

03 May 2018

03 May 2018 goofy.liu

1.Update Items for IDPP-1881-U1, Customer : United Air Line

a.Remove RS232 Item @ IDPP-1881-U1

b.Add United Cert Check "0F" @ IDPP-1881-U1, QC Mode

c.Remove Key Checks: PIN Key; DUKPT (Data) Key;

d.Remove MSR @ QC mode, since only LCL-KEK, w/o DUKPT & PIN

-C03

30 Mar 2018

30 Mar 2018 goofy.liu

verified w/ FW build:25041~

1.Ethernet Ping - Add Netmask 255.255.255.0

2.Update P/N

Replace half size "-" with full size "-".

-C02

29 Mar 2018

29 Mar 2018 goofy.liu

verified w/ FW build:25016

1.Production Mode, Device Reset

Add Device Reset in MSR; RFID; ICC

since Tamper Test might stay in Tamper Eanble status

(Generation CSR) to produce MSR Act Txn Error w/ returning sts 0x0A immediately.

2.Tamper Test:

Update Tamper Eanble / Disable Command Group

old: 04-21 + 01 / 04-21 + 03

new: 90-07;90-00;90-02 / 90-07;90-00

3.QC Mode, LCD Test.

Add LCD Cust Display Mode ON --> Show Default Image --> Cust Mode OFF

to display LCD Test Patterns.

4.Add UMFG-SN before Tamper Test. Copied from NEO 2.0 test plan.
5.P/N Update
+ IDPP-1881-U1, RS232 + USB-HID + Ethernet

-C01

23 Mar 2018

23 Mar 2018 goofy.liu

verified w/ FW build:25016

1.+MSR, LEDs+Buzzer, and LCD Tests in QC mode.
2.Re-power UUT after Tamper Enable(90-02),

for Tamper-Battery test.

3.Secured Keys Check Rule in All P/Ns.

They are LCL-KEK, DUKPT Key, and PIN Key.

4.P/N Check Rules Update

a) RS232

b) USB-HID

c) USB-HID+ ETH

d) RS232+ USB-HID+ ETH

5.Add Get Certs (81-0E) Info Check @ FW Info QC mode.
6.[Fixed] 2018 Feb 02, HW Tony's Report.

Wire 1 <--> 0 message displays reversed.

Printing out detail info when Engineer Mode w/ Debug "ON".

1.New Request - Tamper Enable, Lewis

RE Tamper verification for NEO 2 and VP8800 - TS improvement schedule..msg

2.SQA Report.msg

V 1.00.006

-C01

01 Feb 2018

01 Feb 2018 goofy.liu

1.Date/Time Test : Time Zone Update

old = GMT/UTC + 08:00

new = GMT/UTC + 00:00

since NEO 2.0 Certificates Injection Tool

sets UTC +00:00 as standard time in the reader.

Old Time zone may cause Time Check Error in QC mode.

V 1.00.005

-C03

25 Jan 2018

25 Jan 2018 goofy.liu

1.Tamper Item Update

a.Add Tamper Enable / Disable Functions before and after "Get Tamper Status".

b.Fixed Incorrect Tamper Info.

-C02

17 Jan 2018

17 Jan 2018 goofy.liu

1.Remove Board Level Test Icon (BTM-XX..)

2.Add Delay 500m between MSR Test and RFID one.

To provide more restoration time of 02-05 command

after 1st time Erase Flash.

3.Update FW Info display message

Old: "..TM4.."

New: "NEO 2.0 / AR 3.0.0 +..."

4.Update Part Number List.

5.Verified @ FW V24089

-C01

12 Jan 2018

12 Jan 2018 goofy.liu

V1.00.005-C01, 2018 Jan 11 Released

1.QC mode, PCI enable

a-removed test items

a.1-MSR test, KSN issue

b-Tamper Test Update -

Remove Tamper Enable while in QC mode

c.USB-HID Test Update

2.MSR test item.

Legacy: 02-20 (Interface selectable, Non-secured)

New: 02-05 (Interface selectable, Secured/Non-secured compatible)

3.RTC, Data/Time Set commands

Legacy 25-05

New,UMFG mode, 90-07 --> 90-00 --> 90-01

4.Engineer Mode,

UMFG / SMFG Features Support

a.Load Certificates Support @ Engineer Mode

b.Load Keys Function Support @ Engineer Mode

c.QC Mode, item name update:

Legacy,Err "G53 MCD Chk" -->

Ok "G53 MCU Chk"

5.Part Number List Update

M IDPP-1X81 --> IDPP-1X81X

+ IDPP-1381.D RS232 (115200), No USB-HID, No Ethernet

+ IDPP-1581.D, No RS232, USB-HID, No Ethernet, SRED

+ IDPP-1881.D, No RS232, USB-HID, Ethernet, SRED

Verified with FW V.24793

V 1.00.004

-C01

1.Part Number List Update

+) IDPP-1381, RS232 (115200), No USB-HID, No Ethernet

+) IDPP-1581, No RS232, USB-HID, No Ethernet

+) IDPP-1881, No RS232, USB-HID, Ethernet

+) IDPP-1X81, RS232, USB-HID, Ethernet

-) IDPP-1XX, the legacy one.

2.Rename USB_HID_IDTW.dll to USB_HID_IDTW_32bit.dll

V 1.00.003

V1.00.003-C03

21 Mar 2017

=========================================

V1.00.003-C03, 2017 Mar 21 Released

1.Tamper more check and user confirm, since Tamper Enable behavior ONLY has ONE Chance

2.Remove Tamper Enable in RTC/Date & Time Set

3.Remove 09-14 in AR Platform in Connection

=========================================

V1.00.003-C02, 2017 Feb 23 Released

1.Eng Mode - Add Enter Bootloader Mode.

2.[Time Check]Remove Tamper Enable Cmd

before Time Check Cmds Performing, in Time Check Item.

3.[LCD Pixels] Combined 3 kinds of LCD Test Sub Items into one.

Each display has 800 ms interval time to next one.

Old: ON, Click [PASS] --> OFF, Click [PASS] --> Color Bars, Click [PASS]

New: ON->OFF->Color Bars->Again (10 secs period) , Click [PASS]

4.[Ethernet] Set After Test.

Old: Ethernet MAC Injection --> Ethernet Ping Check

New: Ethernet Ping Check --> Ethernet MAC Injection

5.[Start All Test][Run As Administrator]

Add 1st round notification regarding "Run As Administrator".

6.[Keypad test] - Add Cust Disp ON --> OFF to avoid Keypad no response problem.

FW:23558

V1.00.003-C01

1.RTC Timer Set / Get = 25-05 / 25-06

2.Add Ethernet MAC Address Injection / Check Item

3.[UI,Form04] Adjust Test Item Buttons Maxtrix Area sizing to all buttons view range.

4.Keypad Test Item Update

SW = r23240

SQA = ?

V 1.00.002

V1.00.002-C03

Internal Test

V1.00.002-C03, 2016 Dec 14 Released

1.Add "Administrator Privilege" in manifest.xml definition.

V1.00.002-C02

Internal Test

V1.00.002-C02, 2016 Dec 13 Released

1.Modified LED Display Message

V1.00.002-C01

Internal Test

V1.00.002-C01, 2016 Dec 08 Released

--< Mod >--

1.Network Ethernet Interface Setting Cmd D1-13 Tx/Rx Format Updated

2.[Eng Mode], Some Test Buttons are not cleared after disconnection.

3.KeyPad Test - Cancel Function Ready but still takes time to end (1~4 secs).

Timeout Value Per Pressing Delay , 50 secs --> 4 secs.

4.Formal Part Number Added

+IDPP – 138

*V1.00.001-C03, HWOnly

2016 Nov 08

V1.00.001-C03

HW Test Tool

V 1.00.001

*V 1.00.001-C03

Formal Release

V1.00.001-C03

Formal Release for ..

1.Board Level Test

2.Production Test

3.QC Mode Test

V1.00.001-C01

PISCES, Beta 1 Version

V 0.00.0XX

V 0.00.006-C01

TS158, V0.00.006-C01

PISCES, Beta 1 Version

SetupTS158_0.00.005-C10.exe

V0.00.005-C10, 2016 Sept 07 Released

1.Mod - Tamper Test, Replace messages "Can't Get Tamper Status" with "Get Tampers Done with OK, All OFF"

~~2.Mod - USB Connection, Make MSR Test Duration from 2.2s downto 0.3s response time.~~

SetupTS158_0.00.005-C09.exe

V0.00.005-C09 Released, Sept 06

1.Tamper Test Forever Loop Bugs

2.Tamper Value Display

SetupTS158_0.00.005-C08.exe

V0.00.005-C08 Released, Sept 05

1.Message Changed. Tamper 2,3 --> Wire 0,1

SetupTS158_0.00.005-C07.exe

V0.00.005-C07 Released, Sept 02

1.Modified Tamper Get Status Value.

2.De-activate RFID Interface After Poll For Token.

Page Comparison

Versions Compared

Key

Target Project:

Test Instruction : 80143001-TI

Rev B - N/A

MISC documents

02 - Firmware : TS Version Table

Rev B - N/A

MISC documents

02 - Firmware : TS Version Table

V 1.01.008

Download Link

03 - Specific Part Numbers , United Airline

IDPP-1881D-U1:

IDPP-1881-U1:

Download Link

V 1.01.010

V 1.01.009

V 1.01.008

V 1.01.006

V 1.01.005

V 1.01.004

V 1.01.003

V 1.01.002

V 1.01.001

V 1.00.009

V 1.00.008

V 1.00.007

V 1.00.006

V 1.00.005

V 1.00.004

V 1.00.003

V 1.00.002

*V1.00.001-C03, HWOnly

V 1.00.001

V 0.00.0XX

Target Project:

Test Instruction : 80143001-TI

Rev B - N/A

MISC documents

02 - Firmware : TS Version Table

Download Link

V 1.01.008

V 1.01.006

V 1.01.005

V 1.01.004

V 1.01.003

V 1.01.002

V 1.01.001

V 1.00.009

V 1.00.008

V 1.00.007

V 1.00.006

V 1.00.005

V 1.00.004

V 1.00.003