Firmware
...
| title | Neo 3 |
|---|
Neo 3 Firmware release table
...
### Planning:
- [VP3350 - 1.00.030.0000 - 20211224](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.030.0000+-+20211224)
### Release Notes:
- Core MSR ICC Transaction
- Detect Tamper switch in 9013 command.
- Modify the K81 socket architecture in Startup Reader System to save memory usage.
- Add coin battery initial driver in device tree config.
- Passthrough charging.
- BT communication.
### Known issues:
- Power manager is disabled.
- Syslog auto start is disabled.
- Passthrough charging must connect feamale then connect male.
- Can't communicate with phone via male connecter.
...
### Release Notes:
- FWE-1142 - [Neo3] K TAL Contact Integration
- FWE-1140 - [Neo3] K TAL Application Framework
- FWE-1339 - [Neo3] K Device Tree Commads
- FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration
- FWE-1349 - [Neo3] K Modify Tamper driver for VP3350
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350
- FWE-813 - [Neo3] K Contact L1
- FWE-713 - [Neo3] K Key Management
### Known issues:
- Use 99-03 command to switch the communicate interface like BT and HID.
- Must use 90-25 download the product device tree configuration to enable the driver.
### Document:
- [TS Command List](https://atlassian.idtechproducts.com/confluence/display/NEO3/TS+Command+List)
...
### Release Notes:
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-896 - [Neo3] K Setup Power Management in IDLE loop
- FWE-1227 - [Neo3] K Watchdog System
- FWE-1083 - [Neo3] K Default Device Tree Configuration
### Known issues:
- 2C-01 2C-02 Read contactless card failed.
- C7-3A Get tamper information is wrong.
...
### Release Notes:
- Release fm file for DVT 2 production.
- Release bootloader and default device tree in srec.
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1205 - [Neo3] K CFG ID for VP3350
### Known issues:
- F8-00 Set antenna parameter crashed.
...
### Known issues:
- C73A Tamper get DRS failed due to didn't enable tamper.
- 6014 Contact get reader status incorrect parameter response.
- 2C18 ICC power off command get incorrect parameter response.
- 7781 should support reset BLE name and password.
...
| title | Neo 2 |
|---|
Neo 2 Firmware release table
...
Disable tamper and self test for power management test.
Fix DVT2 current too high when enter sleep mode. (DVT2 C)
Support Winbond External Flash.
...
Disable tamper and self test for power management test .
Use male connector charge phone 500mA when detect female cc pin is 500mA
...
Disable USB switch for config B. (DVT B)
Fix can't enter standby mode for BT version.
...
Release for L2 test
(enable PP log and utc time test)
...
Release for L2 test
(Master and Interac)
...
- Bootloader update to v2.03
- Release for L2 test
- Contactless wakeup mode disabled
...
Add support of contactless wakeup mode
...
Release for EVT2
...
Tools
...
| title | Bootloader |
|---|
...
| title | Docklight Script |
|---|
...
| title | Tool |
|---|
...
| title | SDK Demo |
|---|
Windows
...
Android
...
iOS
...
| title | Event Log |
|---|
...
Documents
...
| title | Document |
|---|
...