| Table of Contents |
|---|
Preface
Customer Requirement.
This Software is used to toggle IDTECH Reader's USB device type between..
a)HID mode
b)KB
(Quick Chip)mode.
Download List
| Version | Comment | Approved by... |
|---|---|---|
V 1.00.004 | ||
Note01. Advanced Function for Engineer : Customized Tx Cmd Function (Could be Ignored by normal user) Right-Clicking the Right-Top Blank Rect Area (Fig 01-Area A.1) Ex01: 1801+ => Press [Enter] Button => Tx Ping Cmd: 18-01 , No Data Ex02: 0400+FFF70101 = Tx Set EMV Global Configuration: 04-00, Data = FFF70101, Burst Mode On ==[ Compliant USB-KB Readers List ]==
===[New Functions]=== Fig 01
A. Customized Command Input, specially for USB-KB mode operation. A.0 - Connected to the UUT First !! A.1 - Right-Clicking Right-Top Area (A1) A.2 - Customized Input Field (Cmd+Data; Tx/Rx Timeout in sec) Cmd Ex01 : 1801+, Ping command, No Tx Data, Where Cmd = 1801, Tx Data = NULL. Cmd Ex02 : 0400+FFF70101, Set EMV Global Configuration with Burst Mode ON Where Cmd = 0400, Tx Data = FFF70101 B.Burst Mode + Auto Poll Switches. C.Right-Clicking Area C to update All Status.. | ||
V 1.00.003 | ||
V 1.00.003-C01, 2017 Sept 18 1.Fixed Bugs. a.Fixed UI Info shows incorrectly during toggling mode between HID & KB Wedge. w/ the reader removal (or usb device invalid). | ||
V 1.00.002 | ||
V 1.00.002-C01, 2017 Sept 14 1.Update 01-0A Commands Tx Raw Data : old: 1 byte, 0x00; 0x01 new: 2 byte, 0x0000; 0x0001 | 1.2017 Sept 15, Approved by Kate Hung RE UniPay 1.5 USB KB Wedge Tool V1.00.002-C01.msg 2.Command Document | |
V 1.00.001 | ||
2017 Sept 12 updated Initial Version. Supported USB Devices.
|
