Firmware

...

Neo 3 Firmware release table

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.055.2220+-+20220520

### Release Notes:
Support DKI.
FWE-1698 Integrate Contact Gen1 Kernel to Neo3
NEO3-542 Turn off CDC/ACM
FWE-1654 FWVP3350-85 NEO3-202 support Poll Mode function on Neo3 K81.
NEO3-650 Support the removal detection for felica card in PT mode.
NEO3-203 Support 0105.
FWE-1145 Contact cancel handling
NEO3-719 Create Secure DT for PCI
NEO3-62 Update BLE parameters setting
NEO3-453 [Kiosk V] K Prod PCI FW Disables NSH Console

### Bug fix:
NEO3-385 NEO3-570 FWE-1458 NEO3-553 NEO3-554 FWE-1451 NEO3-108 NEO3-110
NEO3-562 NEO3-599 NEO3-600 NEO3-649 NEO3-499 HWVP3350-42 NEO3-685 NEO3-633
NEO3-215 NEO3-568 FWE-1650 NEO3-160 NEO3-689 NEO3-695 NEO3-708 NEO3-700
NEO3-713 NEO3-674 NEO3-714 NEO3-671 NEO3-677 NEO3-687 NEO3-690
NEO3-728 NEO3-738 NEO3-191 NEO3-733 NEO3-734

### Known issues:
Device will be bricked when fm update to this version.
NEO3-665 LED 1 did not become solid green when starting MSR or CT transaction.
NEO3-701 The spec PDS did not define LED behavior during CT transaction.
NEO3-749 [VP3350][v1.00.055.2221.T] The type A and Type B CL read failed via 90 13 cmd
NEO3-499 [VP3350][v1.00.050.0000.T] Type D device Wait mode can not work.
FWVP3350-172 [v1.00.055.2221.T] Varianc load LCL-KEK failed when no reset after load cert

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.054.0000+-+20220513

### Release Notes:
FWE-1492 NEO3-529 TransArmor RSA Card Data Cipher CT/CTLS
NEO3-321 Disable nsh console per device tree
FWE-1676 Disable pass-through mode in deactivated mode
FWE-1435 Card Data Cipher (DUKPT TDES/AES)
NEO3-294 CT Card Data Cipher (Transarmor TDES)
NEO3-297 CTLS Card Data Cipher (Transarmor TDES)
NEO3-464 Add UI action after MSR read tracks data succesfully or faliure.
FWE-43 Implement 25-07 to set 24hr selftest offset.
NEO3-597 Add 9013/010B 34 for PCB SN
FWE-1664 Support C7-A0 set DUKPT and PEK attribute
NEO3-563 Use default DT to bootup when product DT version is lower

### Bug fix:
NEO3-485 Fix reader didn't keep in RUN after start pass-through mode
NEO3-469 Remove unexpected 'F' from DFED51
NEO3-337 Reset key management directory
FWE-1339 Fix 90-26 90-29 can't read device tree
FWE-1516 Delete UMFG 90-1C
NEO3-527 Fix the issue where the reader may show failure in response to a valid 2C-0B command string
NEO3-108 NEO3-110 NEO3-124 NEO3-525 NEO3-423 NEO3-276 NEO3-516 NEO3-124 NEO-191 NEO3-424 NEO3-385 NEO3-169 Fix CL tansactioin issues.
NEO3-525 NEO3-551 NEO3-558 Fix MSR issues.
NEO3-379 Fix CT issues.
NEO3-367 NEO3-394 NEO3-395 NEO3-400 Fix transaction config incorrect status code
NEO3-215 Fix whitelist in 91-17

...

### Planning:
Release to SQA for PCI testing.

### Release Notes:
- NEO3-491 Not allow 90-25 90-28 update DT when UMFG lock
- FWE-1347 FWE-1492 Support TA RSA cert injection and encryption
- FWE-1674 Adding 09-30 to retrieve system heap information
- NEO3-72 Adding the 29-0A for retriving the CT and CTLS EMV L1 kernel 
- FWE-1584 Support the keyslot selection(tagDFEC0D) in the Activate Transaction Command (02-40)
- FWE-1662 Support CLL2 Checksum in the 29-08.
- NEO3-397 Cardholder Data HMAC - CTLS
- NEO3-294 NEO3-297 Suppoort assemble DFED29
- FWE-1351 Add C7-3D for reading secure log 
- FWE-1142 Add PEK and DEK slot checking in transaction command
- NEO3-72 Adding 29-0A for retrive CT and CL EMV L1 kernel checksum
- NEO3-402 Adding the 2C-FB command for card removal in PT
- FWE-3350-95 Suppot 2C-0B UI control
- FWE-1688 FWE-1669 Support C7-A4 set and CT-A5 get keyslot for pek and dek.
- NEO3-462 90-13 and 01-0B share same test plan
- FWE-1461 tdes dki: support load key
- FWVP3350-96 2C-0C Enhanced Poll for Token command.
- NEO3-342 Use HW Acceleration for SHA
- Enable FW App Self test

### Bug fix:
- NEO3-399 NEO3-398 NEO3-468 NEO3-477 NEO3-470 NEO3-461 NEO3-518
- NEO3-421 NEO3-433 NEO3-486 FWVP3350-95 NEO3-178 NEO3-177 NEO3-420 
- NEO3-288 FWKV-78 NEO3-499

### Known issue:
- The ctls payment thread is not able to be created any more after the first transaction.
- NEO3-485 Device will hang when test mifare ultralight card in PT mode.
- NEO3-457 Variant C can't do CL transaction due to free memory is only 34KB.
- FWE-1395 VP3350 Power manager state diagram support
- NEO3-499 Type D device Wait mode can not work.

...

### Planning:
Release to Accenture dueo to device tree changed.

### Release Notes:
- NEO3-308 Add more version type value for demo/production type in get version command
- NEO3-470 Do not update ui in case PKI statemahcine did not finish the initialization
- NEO3-402 Adding the 2C-FB command for Card Removal feature in Pass-Through mode.
- FWVP3350-95 adding the Enhanced PT cmd (2C-0B)
- NEO3-99, NEO3-201, NEO3-440, NEO3-441, FWKV-51 Fix the issue of the mifare card.
- FWVP3350-96 adding the 2C-0C Enhanced Poll for Token command.
- NEO3-461 Disable FW App self test.

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.050.0000+-+20220415

### Release Notes:
- Use bootloader v1.03.
- FWE-1626 Enable Power manager
- FWE-1627 Automatic demo sign device tree.
- FWE-1543 Enable self test for VP3350
- FWE-1387 Add whitelist selfcheck
- NEO3-407 Support State machine UI behavior for all products
- NEO3-295 Enable crypto library by default
- NEO3-342 Use HW Acceleration for SHA
- FWE-1142 add feature of confirm transaction amount by cardholder
- NEO3-370 Adding module version information of CTLS L1 for the 09-20 command. 
- FWE-1638 adding 9013 commands for supporting the ICC, SAM, and NFC testing.
- FWE-1613 NEO3-390 JTAG lock enable
- NEO3-999 Add API for retrieve fix key and hmac algorithm function, add function in MSR output process

### Bug fix:
- NEO3-454 FWE-1336 NEO3-200 NEO3-403 NEO3-253 NEO3-432 NEO3-426 NEO3-377 NEO3-235 NEO3-327, NEO3-328, NEO3-371 NEO3-427
  Fix transaction issues.
- NEO3-439 FWE-1156 Fix DPAS issues.
- NEO3-200 NEO3-423 NEO3-224 NEO3-98 NEO3-118 NEO3-250 NEO3-281 FWKV-10 FWKV-43 NEO3-268 NEO3-369 NEO3-281 NEO3-393
  Fix Visa issues.
- NEO3-78  Fix the issue where return status code 0x05 if use 2C-13 exchange APDU with CTLS card.
- NEO3-380 Can't get coin-battery voltage
- NEO3-213 Fix 81-0D wrong response.
- NEO3-312 C7-3A wrong Tamper status.
- FWE-1619 fix erase all keys issue for load plaintext lcl-kek

### Known issue:
- Neo3-457 Variant C can't do CL transaction due to free memory is only 34KB.

...

### Planning:
- Release candidate for manufacture production and Accenture.

## Release Notes:
- Get v1.00.049.0000.S in 2900 firmware version.

...

### Planning:
- Release candidate for manufacture production and Accenture.

## Release Notes:
- FWE-1451 ignore mode of use checking for salt.

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.048.0000+-+20220401

### Release Notes: 
- FWE-1451 Ignore mode of use checking for salt
- NEO3-213 81-0D Retrieve Detailed Key Info Doesn't Work
- NEO3-326 [Neo3] K Add PCI Output Check to 02-40
- FWE-1444 [Neo3] K Clear Data Cipher Buffers After CLLS L2 Transaction
- FWE-1151 redesign the API for the MSR equivalent tracks data tags(DFEF4C,DFEF4D)
- NEO3-305 [Neo3] K Preprocess Transaction commands for Compatible SRED & Non-SRED
- FWE-1535 09-20 command to support CTLS Module Version Information
- FWE-1516 K Jtag Disable
- FWE-1600 Enhance K81 bootup speed
- FWE-1565 Enalbe hardfault dump in syslog.
- Nuttx 10.2 

### Bug fix:
- NEO3-107 NEO3-109 NEO3-111 NEO3-113 NEO3-114 NEO3-132 NEO3-133 NEO3-160 NEO3-193 NEO3-198 
  NEO3-200 NEO3-272 NEO3-276 Fix Visa issues
- NEO3-198 NEO3-200 NEO3-236 NEO3-260 NEO3-280 NEO3-286 NEO3-323 NEO3-324 Fix DPAS issues 
- NEO3-208 91-13 and 91-14 Error Codes are different to NEOII
- NEO3-322 04-09 command implement failed in 10.2 Branch
- NEO3-333 Reader didn't beep when reboot(77-05)

### Known issues:
- NEO3-261 02-40 command without tap card, LED 0 will turn on then change to idle mode till timeout
- NEO3-322 04-09 command implement failed in 10.2 Branch
- Disable Power manager.
- Variant C BT can't connect.
- Variant C load cert failed.

...

### Planning:
- Release candidate for manufacture production and Accenture.

## Release Notes:
- Get v1.00.047.0000.S in 2900 firmware version.

...

### Planning:
- Release candidate for manufacture production and Accenture.

### Release Notes:
- FWE-1339 Support 90-28/90-29 update default device tree.

### Bug fix:
- NEO3-283 [VP3350 FW v1.00.045.0000.T]Jtag must be disabled after the units leave factory 
- NEO3-282 [VP3350 FW v1.00.045.0000.T]Firmware update must be rejected in Tamper mode
- NEO3-284 [VP3350 FW v1.00.045.0000.T]Firmware update must be rejected in de-activated mode
- FWVP3350-118 VP3350 BT is sluggish in response to IDG command
- NEO3-260 K DESfire Virtual Card Activation within ACT

...

### Planning:
- Release candidate for manufacture production and Accenture.

### Release Notes:
- FWE-1339 Add idg commands 90-28/90-29 for default dtb download and retrieve respectively.
- FWE-1578 [Neo3] K Add New Root CA

### Known issue:
- NEO3-222 [VP3350][v1.00.042.0000.T] PreSQA::Neo3:VP3350:Reader may reboot unexpectedly when it is in “idle“ state
- NEO3-264 [VP3350][v1.00.044.0000.T][CL] The virtual card detection process is different from K4.

...

### Planning:
- Release candidate for manufacture production and Accenture.

### Bug fix:
- NEO3-260 enlarge the stack size according to the CONFIG_IDT_LIBCRYPTO
- NEO3-267 fix the issue where the cmd 2C-07 is not stable after tapping Mifare Classic 1K card.
- NEO3-269 Don't switch power manager state when usb suspend
- NEO3-270 Cannot handle partial packet data
- NEO3-274 Don't ring beep when boot up if reset reason is not power on.

### Known issue
- NEO3-222 [VP3350][v1.00.042.0000.T] PreSQA::Neo3:VP3350:Reader may reboot unexpectedly when it is in “idle“ state
- NEO3-264 [VP3350][v1.00.044.0000.T][CL] The virtual card detection process is different from K4.
- FWE-1578 [Neo3] K Add New Root CA

...

### Planning:
- Release candidate for Accenture.

### Bug fix:
- Disable PM in default DT to fix some variant D HW female detect ping didn't rework. 
- Don't enable USB voltage regulator to standy in stop mode when usb initialize. 

...

### Planning:
- Release candidate for manufacture production.

### Release Notes:
- Support bootloader ver 1.02.
- Enable PM, button and wdog in default device tree for all VP3350 variant.
- FWE-931  [Neo3] K Optimize Neo 3.0 FW Memory Map
- FWE-1386 [Neo3] K PCI State Machine
- FWE-1330 [Neo3] K Certificate Management Self-Test
- FWE-1543 [Neo3] K Compatible PCI (SRED / SRED with PIN / PIN Only）& Non-PCI (Non-SRED)
- FWE-1512 [Neo3] K Cardholder CTL2/CLL2 output API
- FWE-1538 [Neo3] K Manage EMV TLVs and IDTECH TLVs
- FWE-1483 [Neo3] K Driver support USB Suspend Mode
- FWE-1459 [Neo3] K Support NGA Protocol
- FWE-1506 [Neo3] K Discretionary Data White List API for CT/CTLS/MSR
- FWE-1140 [Neo3] K TAL Application Framework
- FWE-1551 [Neo3] K Magre Encryption API in CLL2
- FWE-1547 [Neo3] K Preprocess Transaction commands for Compatible SRED & Non-SRED
- NEO3-128 [Neo3] Support 81-0E Get Certificate Info /81-0F Get Certificate
- FWE-1524,1525 [Neo3] K LED driver 
- FWE-1009,1010 [Neo3] K TDES AES DUKPT Card Data Cipher
- FWE-1495,1498,1499,1500,1501 [NEO3] K Support open,close,read, write and delete via IDG command
- Turn on pci/umfg_status checking on 90-00/01/03/04

### Bug fix:
- NEO3-212 Fix Delete All key shouldn't erase LCL-KEK.
- NEO3-151 Fix [VISA] CRL not effective
- NEO3-164 MSR doesn't work in 02-40 or 02-01
- NEO3-232 [VP3350 FW v1.00.042.0000.T]Device doesn't suspend with three times wrong signature
- NEO3-220 [VP3350 FW v1.00.042.0000.T][TS196] command 2C20, without swipe card till timeout, reader will reboot
- NEO3-161 [VP3350 FW v1.00.038.0000.T] Transaction often mute if doesn't open Console
- NEO3-186 [VP3350 FW v1.00.038.0000.T][DPAS] after 02-40 command, response log miss some mandatory data
- NEO3-204 [VP3350 FW v1.00.040.0000.T] redundant data in response of some PCD exchange command
- NEO3-224 [VP3350 FW v1.00.042.0000.T][Visa transit] Reader can't construct correct SPI command
- NEO3-198 [VP3350 FW v1.00.040.0000.T][DPAS] terminate with wrong error code and no two short beeps
- FWKV-45 [Kiosk V][KIOSKV FW v1.00.039.0002.T]ACT should be valid after tapping Desfire and Ultralight card

### Known issues:
- Didn't support FM upgrade from old version due to flash map and default device tree changed.
- The lfs content will miss after FM upgrade due to flash map change.
- Must flash srec via JFlash for update the default device tree.
- Didn't enable usb suspend function.

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.042.0000+-+20220304

### Release Notes:
- FWE-1423 Add 91-00 Master reset 
- FWE-1386 PCI State Machine
- FWE-1468 Key Management Self-Test
- FWE-1533 Support 81-0B get dukpt key ksn extend.
- FWE-1534 Support 81-0C get key info.
- FWE-1412 FWE-1413 Add signature verification in 91-01 91-09.
- FWE-1410 Support white list signature and verification
- NEO3-182 Support default CTLS configuration
- FWE-1527 Statistics-gathering & reporting package

### Bug fix:
- NEO3-199 RKI doesn't reliable.
- NEO3-194 Finetune usb initial flow for VP3350.
- NEO3-197 Master reset doesn't work.
- NEO3-161 Fix transaction often mute if doesn't open Console.
- NEO3-189 NEO3-177 NEO3-120 NEO3-187 Fix transaction issues.

### Known issues:
- Not support PCI UI.
- 0240 MSR data can't output.
- 2C20 Wait swip MSR timeout, reader will reboot.
- NEO3-128 Not support 81-0E, 81-0F. TS can't get cerificate list.
- BT friend name will miss after reader reboot.

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.040.0000+-+20220225

### Release Notes:
- FWE-1458 Support RKI LCL-KEK & DEK and ECC key.
- Enable PCI State machine but disable UI.
- Support Mifare Virtual card.
- FWE-1423 Fine tune master reset. 
- FWE-1511 Support 60-10 CT transaction.
- FWE-1347 NEO3-162 Fix white list issue.
- NEO3-123, NEO3-137 NEO3-148 NEO-144 FWE-1155 NEO3-15 NEO3-152 Fix Visa issues.

### Known issues:
- Didn't support PCI UI.
- 0240 MSR data can't output.

...

### Planning:
https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.038.0000+-+20220218

### Release Notes:
- Certificate loading. (90-00/01/02/03/04/05 81-0F)
- Support PCI state machine to activated. (90-07)
- Master reset (90-00, 90-21).
- MSR, CT transaction with plain text output.(02-01/02-40)
- CL Visa DPAS kernel.
- Passthrough standard white list. (91-13/15/17 2C-03/04/07/13/51/53)
- Support PM state diagram.
- Support pathrough charging. (90-13 26)
- FWE-1441 Detect MIFARE DESFire as part of 02-40 leaving.
- FWE-1513 K Enable 02-01 No Ciphered ACT
- Support  Mifare classic card in passthrough mode.
- Print error level syslog in file system and console.

### Known issues:
- No cert management.
- No RKI.
- Didn't support PCI self test.
- Not support PCI State machine to common.
- No DKI (No NGA protocol).
- Can't support CL in protect build.

...

### Planning:
Hot fix for support Mifare DESFire for customer.

### Release Notes:
- Support Mifare DESFire and Mifare Ultralight C in passthrough mode.
- Only VP3350_FW_v1.00.0037.0000.T_flat.srec can support Visa CL.
- FM update flat and protect build.

### Known issues:
- Can't load cert key.
- PCI State machine is not enabled.
- Not support update dtb via FM update tool.
- Can't communicate with phone via male connecter 
- Lightning connector not suport.
- Didn't enalbe syslog.

...

...

### Planning:
- [VP3350 - 1.00.036.0000 - 20220121](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.036.0000+-+20220121)

### Release Notes:
- FM update bootloader and application.
- 9010 Save Serial number in OTP.
- FWE-1407 [Neo3] K Mifare Ultralight C Passthough.
- FWE-673 [Neo3] K Tamper Management.
- FWE-1386 [Neo3] K PCI State Machine.
- FWE-1395 [Neo3]K VP3350 Power manager state diagram support.

### Known issues:
- Can't load key and certificate.
- PCI State machine is not enabled.
- Not support update dtb via FM update tool.
- Can't communicate with phone via male connecter 
- Lightning connector not suport.
- Not support syslog.

...

### Release Notes:
- Support protected build.
- Bootloader 1.01 version 
- Enable and config power manager default timer for each config.
- FWE-1395 [Neo3]K VP3350 Power manager state diagram support
- FWE-1386 [Neo3]K PCI State Machine
- FWE-1403 [Neo3]K Add Power Management to TM4
- FWE-1134 Tag 9F02 response error in PDOL.
- FWE-713  [Neo3]K Key Management
- FWE-1353 [Neo3]K Task Transaction Example
- FWE-1009 [Neo3]K TDES DUKPT Card Data Cipher
- FWE-1366 [Neo3]K Add BT communication with IDG commands on VP3350
- FWE-875  [Neo3]K Firmware Update via Bootloader.
- FWE-673  [Neo3]K Tamper Management
- FWE-1394 [Neo3]K When K81 PM enabled, the EMVSIM communication is abnormal

### Known issues:
- Syslog auto start is disabled.
- Passthrough charging must connect female then connect male.
- Can't communicate with phone via male connecter.
- Can't update device tree config via FM update tool.

...

### Planning:
- [VP3350 - 1.00.030.0000 - 20211224](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.030.0000+-+20211224)

### Release Notes:
- Core MSR ICC Transaction
- Detect Tamper switch in 9013 command.
- Modify the K81 socket architecture in Startup Reader System to save memory usage.
- Add coin battery initial driver in device tree config.
- Passthrough charging.
- BT communication.

### Known issues:
- Power manager is disabled. 
- Syslog auto start is disabled.
- Passthrough charging must connect feamale then connect male.
- Can't communicate with phone via male connecter.

...

### Release Notes:

- FWE-1142 - [Neo3] K TAL Contact Integration 
- FWE-1140 - [Neo3] K TAL Application Framework
- FWE-1339 - [Neo3] K Device Tree Commads 
- FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration 
- FWE-1349 - [Neo3] K Modify Tamper driver for VP3350
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350
- FWE-813 - [Neo3] K Contact L1
- FWE-713 - [Neo3] K Key Management

### Known issues:
- Use 99-03 command to switch the communicate interface like BT and HID.
- Must use 90-25 download the product device tree configuration to enable the driver.

### Document:
- [TS Command List](https://atlassian.idtechproducts.com/confluence/display/NEO3/TS+Command+List)

...

### Release Notes:
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-896  - [Neo3] K Setup Power Management in IDLE loop
- FWE-1227 - [Neo3] K Watchdog System
- FWE-1083 - [Neo3] K Default Device Tree Configuration

### Known issues:
- 2C-01 2C-02 Read contactless card failed.
- C7-3A Get tamper information is wrong.

...

### Release Notes:
- Release fm file for DVT 2 production.
- Release bootloader and default device tree in srec.
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1205 - [Neo3] K CFG ID for VP3350

### Known issues:
- F8-00 Set antenna parameter crashed.

...

### Known issues:
- C73A Tamper get DRS failed due to didn't enable tamper.
- 6014 Contact get reader status incorrect parameter response.
- 2C18 ICC power off command get incorrect parameter response.
- 7781 should support reset BLE name and password.

...

Tools

...

...

...

...

V 3.2.3.002.Spec

...

-C11.051.zip

...

Windows

...

Android

...

iOS

...

...

Documents

...

...