Document: NEO IDG Supplement for UniPay III and UniPay 1.5
...
Date
Posted
...
Release
Package
...
Release
Note
...
Unipay1.5 TTK NEO v1.02.037.rar
Unipay1.5 TTK NEO v1.02.037_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.32.docx
UniPay1.5 TTK NEO v1.02.037
1. Fix JIRA issue
UTK-41 : Encryption ON, after sent cmd 60-10 -> inserted card (PAN = 12), reader returned tag 57 w/ incorrect mask data.
UTK-42 : Swipe Gift card, PAN is not masked as customer's request
2. Modify masking PAN feature in Tag56
Note : If downgrade FW before v1.02.030, need to re-inject initial DUKPT key again.
If update FW from v1.02.030 or older version, it needs to reboot device again after updating FW v1.02.037.
(Unipay1.5 TTK NEO v1.02.037_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.036.rar
Unipay1.5 TTK NEO v1.02.036_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.32.docx
UniPay1.5 TTK NEO v1.02.036
1. Add mask PAN feature
Note : If downgrade FW before v1.02.030, need to re-inject initial DUKPT key again.
If update FW from v1.02.030 or older version, it needs to reboot device again after updating FW v1.02.036.
(Unipay1.5 TTK NEO v1.02.036_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.035.rar
Unipay1.5 TTK NEO v1.02.035_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.29.docx
UniPay1.5 TTK NEO v1.02.035
1. Fix JIRA issue
UTK-39 : After updated F/W from ver. 030 (reader had admin/ data keys) to 033 -> sent cmd 81-02, admin key was become 02 (End of Life) status.
UTK-40 : After sent cmd 60-10 w/ specific tags DFEF52 & DFEE1A -> inserted card, reader can not read card.
Note : If downgrade FW before v1.02.030, need to re-inject initial DUKPT key again.
If update FW from v1.02.030 or older version, it needs to reboot device again after updating FW v1.02.035.
(Unipay1.5 TTK NEO v1.02.035_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.034.rar
Unipay1.5 TTK NEO v1.02.034_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.29.docx
UniPay1.5 TTK NEO v1.02.034
1. Fix "When the CT transaction timeout, it will increase KSN by 1"
Note : If downgrade FW before v1.02.030, need to re-inject initial DUKPT key again.
(Unipay1.5 TTK NEO v1.02.034_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.033.rar
Unipay1.5 TTK NEO v1.02.033_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.29.docx
UniPay1.5 TTK NEO v1.02.033
1. Fix JIRA issue
FU-27 : Incomplete swipe during EMV transaction sometimes returns success response without the MSR data
FU-28 : FW version string should match
FU-29 : Device reset command for UniPay 1.5 TTK
2. Fix TTK issue #22,#32 transaction cannot be canceled at once
Note : If downgrade FW before v1.02.030, need to re-inject initial DUKPT key again.
(Unipay1.5 TTK NEO v1.02.033_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.032.rar
Unipay1.5 TTK NEO v1.02.032_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.27.docx
UniPay1.5 TTK NEO v1.02.032
1. Fix JIRA issue
UTK-35 : After set TTK default AID/ CAPK -> sent cmd 60-10 -> inserted Retailer Terminal Test CardAMEX,readerwas stuck in "PLEASE WAIT..." msg and then transaction was timeout finally.
Note :If downgrade FW before v1.02.030, need to re-inject initial DUKPT key again.
(Unipay1.5 TTK NEO v1.02.032_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.031.rar
Unipay1.5 TTK NEO v1.02.031_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.27.docx
UniPay1.5 TTK NEO v1.02.031
1. Add random key to replace with original master key
2. Modify config 5C behavior for TTK
...
(Unipay1.5 TTK NEO v1.02.031_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.030.rar
Unipay1.5 TTK NEO v1.02.030_LOG.rar
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.25.docx
UniPay1.5 TTK NEO v1.02.030
1. Rename FW version.
(Unipay1.5 TTK NEO v1.02.030_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.029.zip
Unipay1.5 TTK Debug NEO v1.02.029.zip
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.25.docx
...
UniPay1.5 TTK NEO v1.02.029
1. Fixed USB timer issuer.
(Sometime USB can not connect with PC.)
...
Unipay1.5 TTK NEO v1.02.028.rar
Unipay1.5 TTK NEO v1.02.028_LOG.rar
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.25.docx
...
UniPay1.5 TTK NEO v1.02.028
1. Fix JIRA issue
UTK-33 : After sent cmd 60-10 -> swiped card w/ abnormal method -> swiped card (service code = 201) successfully, reader completed transaction directly.
UTK-34 : After sent cmd 60-10 -> inserted card, sometimes reader returned strange msg "TRY MSG AGAIN".
(Unipay1.5 TTK NEO v1.02.028_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.027.rar
Unipay1.5 TTK NEO v1.02.027_LOG.rar
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.25.docx
...
UniPay1.5 TTK NEO v1.02.027
1. Fix JIRA issue
UTK-25 : Encryption ON, after sent cmd 60-10 -> fallback to MSR function -> waited until time out, reader returned TERMINATE notice instead of TIME OUT.
UTK-26 : Encryption ON, during CT transaction -> sent cmd 60-13, reader returned RX w/o tag DF4A (KSN).
UTK-27 : Encryption ON, after sent cmd 60-10 w/ tag DFEF1F (enabled Auto-Authenticate) -> inserted card, reader returned tag DF4C (Masked PAN) that had no data.
UTK-28 : Encryption ON, after sent cmd 60-10 w/ specific setting (not support FallBack) -> inserted card, reader terminated transaction but returned incorrect card type info..
UTK-30 : After completed MSR transaction w/ VISA MSD card -> sent cmd 04-09 -> sent cmd C7-3A, reader returned SorceID 02 w/ error status.
UTK-31 : After sent cmd 02-40 -> swiped card w/ abnormal method, transaction was terminated but reader returned tag DFEE25 w/ incorrect data "00 11" (MSR Success).
UTK-32 : After sent cmd 60-10 -> swiped card w/ abnormal method -> swiped card successfully, reader returned some tags w/ incorrect data (MSR FallBack info.).
2. Fix customer reply issue#6
(Unipay1.5 TTK NEO v1.02.027_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.026.rar
Unipay1.5 TTK NEO v1.02.026_LOG.rar
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.24.docx
...
UniPay1.5 TTK NEO v1.02.026
1. Fix JIRA issue
UTK-23 : DF4C containing Masked Pan not being returned
UTK-24 : Incorrect response code DFEE25 when fallback to MSR
2. Modify debug mode output from UART
3. Modify Tag 0xDF34 contact U15TTKNEOV1020XX
4. Remove command 29-18
5. Support config 5C
6. Modify command 60-0A CAPK limit
7. Fix some Non-ISO MS card encrypted
8. Fix 60-10 use MSR without 5 times retry
9. Add MSR expire date check
(Unipay1.5 TTK NEO v1.02.026_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.025.rar
Unipay1.5 TTK NEO v1.02.025_LOG.rar
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.24.docx
...
UniPay1.5 TTK NEO v1.02.025
1. Fix JIRA issue
UTK-18 : Encryption ON, after sent cmd 60-10 -> inserted card, reader returned tag DF4C w/ incorrect data.
UTK-19 : Encryption ON, after sent cmd 60-10 w/ tag DFEF1F = 01 01 -> inserted card, reader did not Auto-authenticate transaction.
UTK-20 : Encryption ON, reader returned incorrect status code "01" after sent cmd 04-00 w/ tag DFEF25 = 01.
UTK-21 : Encryption ON, after sent cmd 60-10 -> fallback to MSR function -> waited until time out, reader returned TERMINATE notice instead of TIME OUT.
UTK-22 : Encryption ON, after completed MSR transaction w/ Discover card -> sent cmd C7-3A, reader returned SorceIDs w/ all error status.
(Unipay1.5 TTK NEO v1.02.025_LOG is for laboratory Test Version)
...
Unipay1.5 TTK NEO v1.02.024.rar
Unipay1.5 TTK NEO v1.02.024_LOG.rar
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.24.docx
...
UniPay1.5 TTK NEO v1.02.024
1. Block AID, Block Card, Card Reject will terminate transaction.
2. Add compile option to replace command C7-F3
3. Update Print Message Usage and format for laboratory Test Version
4. Add command 29-18 to set FW version for tag DF34
5. Add a Tag (DF34) for Get Version, the TLV will be exist in EMV L2 Transaction Result.
6. Support Tag DFEF1F, if it is exist in Terminal Data, device support auto-authentication feature.
7. Modify Tag DF4B field 1, DF4C, DF4D to meet Augusta S TTK format and behavior
(Unipay1.5 TTK NEO v1.02.024_LOG is for laboratory Test Version)
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx
...
UniPay1.5 TTK NEO v1.02.023
1. Fix JIRA issue
UTK-14 : Reader returned incorrect Display Message Language & Display Message Control after sent cmd 60-10 w/ tag DFEE27 = 0.
UTK-16 : Auto Poll + Burst mode ON --> Swipe Discover card ---> Response miss Tag DFEF4C and DFEF4D
UTK-17 : After sent cmd 60-10 -> swiped card w/ abnormal method, reader did not terminate the transaction.
2. Modify USB PID 3140 for UniPay1.5 TTK
3. Fix C7-3B command fail
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx
...
UniPay1.5 TTK NEO v1.02.022
1. Fix JIRA issue
UTK-2 : After sent cmd 60-10 -> inserted card and then fallback to MSR, MSR retry count was incorrect.
UTK-12 : Encryption ON, after sent cmd 60-10 -> swiped VISA MSD -> sent cmd 60-13, RX did not have tag DF4A (KSN).
UTK-13 : Terminal data was disappeared after sent cmd 60-06 w/ incorrect parameter.
2. Modify encryption type hard code setting back to TDES
3. Modify 60-10 can set Tag DFEF52
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.20.docx
...
UniPay1.5 TTK NEO v1.02.021
1. Fix JIRA issue
UTK-1 : Reader can be set tag DFEF52 w/ data that out of range.
UTK-3 : After completed transaction once, sent cmd 60-10 -> fallback to MSR and then swiped card, reader returned strange data.
UTK-4 : Auto poll + Burst mode ON --> Swipe MSR card ---> Reader return incorrect value of "IC" byte
UTK-5 : Reader returns duplicate tag 9F39, FFEE01 and DFEE26 when get transaction result (03-00) or (03-40)
UTK-6 : Response of Get Transaction Result for IDTECH (03-40) miss tag DFEF4C and DFEF4D
UTK-7 : After canceled cmd 60-10 -> sent cmd 04-F0, reader can not work anymore.
UTK-8 : Reader should not return track 1 data when swipe JIS II MSR card
UTK-9 : After sent cmd 60-10 (FallBack = 00) -> inserted card that can not be powered on, reader returned tag DF4F w/ incorrect data '00'.
UTK-10 : Attribution byte indicate encryption type is TDES, however the tarck data is encrypted by AES
UTK-11 : After fallback to MSR -> canceled cmd 60-10, reader tri-color LED was still flashing 'Amber'.
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.20.docx
...
UniPay1.5 TTK NEO v1.02.019
1. Modify MSR format
2. Modify PrePAN default setting to 0x06
3. Add Tag 0xDF4A when MSR data encrypted
4. Add TTK debug mode for certification
5. Add command C7-F3 for certification
6. Fix fallback retry times fail
7. Fix command 04-0A, 04-F0 will cause TTKselftest fail
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.19.docx
...
TTK NEO v1.02.016
1. Initial release
1. Fix JIRA issue
UTK-39 : After updated F/W from ver. 030 (reader had admin/ data keys) to 033 -> sent cmd 81-02, admin key was become 02 (End of Life) status.
UTK-40 : After sent cmd 60-10 w/ specific tags DFEF52 & DFEE1A -> inserted card, reader can not read card.