...
Date
Posted
...
Release
Package
...
Release
Note
...
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.34.docx
...
VP3300 Bluetooth NEO v1.01.048
1. Support SmartTap 2.1
2. reader return status code 0xA3 when get Activate transaction and user insert CT card.
3. Update FW version and naming:
FW version : NEO v1.01 -> VP3300 Bluetooth NEO v1.01
FW full version : BTPAY MINI NEO v1.01.xxx -> VP3300 Bluetooth NEO v1.01.xxx
HW_VERSION : HW,VPBTPay Mini\r\nK21F Rev -> HW,VP3300 Bluetooth\r\nK21F Rev
4. Update USB product string:
product string : BTPay mini -> VP3300 Bluetooth
5. Fixed JIRA issues:
BTM-22: pull card befor 60-10 finished,btpay mini will alway response 0x0c
BTM-23: set burst mode off,auto poll on,tap a card with data,then tap a card without data,use(03-40),reader will return wrong data
BTM-24: device_setBurstMode(2):(04-00 fff7-02),when set burst mode auto exit,reader works as burst mode always on
BTM-25: (60-14),card seated state may not be proper
BTM-27: connect android sdk with usb,reader will not response (60-11 60-12) when startTransaction timeout
BTM-28: Reader returned status code as 0x08 (Timeout) when set Friendly Name of BLE (30-12)
VP3300 USB-BL-V3.00.011
1. Update BL version:
BL version : BTPAY_MINI-BL-V3.00.xxx -> VP3300 Bluetooth-BL-V3.00.xxx
2. Update USB product string:
product string : ID TECH BTPay mini -> VP3300 Bluetooth
...
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx
...
NEO v1.01.047
1. Change BTPay Mini project name to VP3300
...
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx
...
NEO v1.01.046
1. Fixed JIRA issues:
SBMAS-64: when burst mode on,emv degrade to magstripe failed
SBMAS-67: ctls_setConfigurationGroup(04,03):add 20 group and 0409 will return 0x62
BTM-21: Set Burst mode on-> Contact Start Transaction (60-10)_Failback supported-> Fail on ICC reading-> Swipe MSR card-> Reader returned MSR data as payload frame
...
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx
...
NEO v1.01.045
1. Fixed JIRA issues:
SBMAS-59: device_sendDataCommand();sdk crash when send a long data
BTM-20: Power off -> Connect PC & BTPay mini via USB -> Get FW version of BLE (30-13) -> Reader return timeout
Note: There is no version 044.
...
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.33.docx
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx
...
NEO v1.01.042
1. Fixed JIRA issues:
BTM-19: After sent cmd 02-01 or 02-40 -> waited for cmd timeout, reader returned response frame w/ status code "08" (Timeout) twice.
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx
...
NEO v1.01.041
1. Fixed JIRA issues:
BTM-18: Data length of "Enhanced Encrypted MSR Data" is incorrect when get transaction result (03-40)
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx
...
NEO v1.01.040
1. Fixed JIRA issues:
BTM-4: Activate transaction(02-40)--> Tap ViVOtech test card ---> Some bytes of Track 1 data are missed
BTM-5: Auto poll ---> Get transaction result (03-00) ---> Tap ViVOtech test card ---> Track 2 data have garbage
BTM-6: Reader returned status code '00' after sent cmd 04-00 to set tag DFEF25 w/ invalid data.
BTM-7: Encryption ON but w/o key, after sent cmd 02-40 -> swiped ISO4909 card, reader returned tag DFEF4D w/ incorrect data.
BTM-8: Encryption ON, after sent cmd 60-10 -> waited until cmd timeout, reader returned KSN that was increased.
BTM-9: Encryption ON, after sent cmd 02-40 -> tapped INTERAC card, reader returned nothing.
BTM-10: Encryption ON (flag = 02), after tapped ViVOtech card -> sent cmd 03-40, reader returned tags FFEE13/ FFEE14 w/ strange data.
BTM-11: Mobile phone had connected w/ reader via Bluetooth, after powered off/ on reader -> PC sent cmd, reader reboot automatically.
BTM-12: After sent cmd 02-01 -> tapped iPhone w/ Panera Bread card (but reader may be failed to read it), reader returned nothing and LED 0 was become off.
BTM-13: Enable Encryption = 0x03 -> Tap qVSDC -> Get transaction result 03-40 -> Reader returns incorrect value of tag DFEF4C & DFEF4D
BTM-14: Enable Encryption = 0x03 -> Swipe MSR test card -> Get transaction result 03-40 -> Tag DFEF4C & DFEF4D are not returned
BTM-15: Reader retruns incorrect track data format when activate transaction (02-01) and tap SamsungPay MST.
BTM-16: After sent cmd 02-40 -> tapped card, sometimes reader did not read cards (Discover/ MChip) successfully.
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.31.docx
...
NEO v1.01.039
1. Fixed JIRA issues: BTM-01, BTM-02 and BTM-03.
2. Add timeout feature for 30-10, 30-11 and 30-12. if user send those 3 commands to BLE via USB but BLE connected to any bluetooth device, reader send timeout(0x08) in 5 seconds.
3. Fixed TS-4926.
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.28.docx
...
NEO v1.01.038
1. Add commands:
Get BLE Address (30-10)
Get Friendly Name of BLE (30-11)
Set Friendly Name of BLE (30-12)
Note: this version do not meet the comments for tag DFEF4D, NEO IDG Rev 106.
...
NEO IDG Supplement for UniPay III and UniPay 1.5 v1.21.docx
...
NEO v1.01.037
1. Release.