Update!: ID TECH has release an updated SDK. The iOS SDK posted on this page in the SDKs section will work with iOS 13x. There is a long delay (20 seconds) connecting to the reader each time the application is launched. The application provider will need to "re-build" their application with the new SDK and make a new version of their app (for iOS 13) available. We are still working with Apple to get a more complete resolution for this issue. confirmed that iOS 13.2 resolves the issue.
Info
title
Lightning Connector Notice
ID TECH has had to update the lightning connector component on iMag Pro II due to the previous connector going end-of-life. During the validation of the new connector, ID TECH found that certain legacy iOS revisions were not able to work with the pass-through charging feature of the device. Below is a chart indicating which revision of the iMag Pro II are affected, and which iOS versions are supported for each:
iMag Pro II Part Number & Revision
iOS version that supports pass-through charging
IDMR-AL30133 Rev J (and below)
iOS 9.3.5 and above
IDMR-AL30133 Rev K (and above)
iOS 12.4.5 (and above)
Info
title
Quick Facts
Description: Mobile Reader for Apple mobile devices with a Lightening Lightning connector
Encrypting reader: fully supports TDES and AES data encryption using DUKPT key management method
Magnetic Stripe only reader. Bidirectional with 3 tracks readability (no contactless, no iccICC)
Interface(s): Lightening Lightning connector for Apple mobile devices
Pass-through charging: through the micro USB port on the side (allows you to pawer power the iPad or iPhone while the reader is connected)