Table of Contents
Firmware
...
| title | Neo 3 |
|---|
Neo 3 Firmware release table
...
### Planning:
Hot fix for support Mifare DESFire for customer.
### Release Notes:
- Support Mifare DESFire and Mifare Ultralight C in passthrough mode.
- Only VP3350_FW_v1.00.0037.0000.T_flat.srec can support Visa CL.
- FM update flat and protect build.
### Known issues:
- Can't load cert key.
- PCI State machine is not enabled.
- Not support update dtb via FM update tool.
- Can't communicate with phone via male connecter
- Lightning connector not suport.
- Didn't enalbe syslog.
...
...
### Planning:
- [VP3350 - 1.00.036.0000 - 20220121](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.036.0000+-+20220121)
### Release Notes:
- FM update bootloader and application.
- 9010 Save Serial number in OTP.
- FWE-1407 [Neo3] K Mifare Ultralight C Passthough.
- FWE-673 [Neo3] K Tamper Management.
- FWE-1386 [Neo3] K PCI State Machine.
- FWE-1395 [Neo3]K VP3350 Power manager state diagram support.
### Known issues:
- Can't load key and certificate.
- PCI State machine is not enabled.
- Not support update dtb via FM update tool.
- Can't communicate with phone via male connecter
- Lightning connector not suport.
- Not support syslog.
...
### Release Notes:
- Support protected build.
- Bootloader 1.01 version
- Enable and config power manager default timer for each config.
- FWE-1395 [Neo3]K VP3350 Power manager state diagram support
- FWE-1386 [Neo3]K PCI State Machine
- FWE-1403 [Neo3]K Add Power Management to TM4
- FWE-1134 Tag 9F02 response error in PDOL.
- FWE-713 [Neo3]K Key Management
- FWE-1353 [Neo3]K Task Transaction Example
- FWE-1009 [Neo3]K TDES DUKPT Card Data Cipher
- FWE-1366 [Neo3]K Add BT communication with IDG commands on VP3350
- FWE-875 [Neo3]K Firmware Update via Bootloader.
- FWE-673 [Neo3]K Tamper Management
- FWE-1394 [Neo3]K When K81 PM enabled, the EMVSIM communication is abnormal
### Known issues:
- Syslog auto start is disabled.
- Passthrough charging must connect female then connect male.
- Can't communicate with phone via male connecter.
- Can't update device tree config via FM update tool.
...
### Planning:
- [VP3350 - 1.00.030.0000 - 20211224](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.030.0000+-+20211224)
### Release Notes:
- Core MSR ICC Transaction
- Detect Tamper switch in 9013 command.
- Modify the K81 socket architecture in Startup Reader System to save memory usage.
- Add coin battery initial driver in device tree config.
- Passthrough charging.
- BT communication.
### Known issues:
- Power manager is disabled.
- Syslog auto start is disabled.
- Passthrough charging must connect feamale then connect male.
- Can't communicate with phone via male connecter.
...
### Release Notes:
- FWE-1142 - [Neo3] K TAL Contact Integration
- FWE-1140 - [Neo3] K TAL Application Framework
- FWE-1339 - [Neo3] K Device Tree Commads
- FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration
- FWE-1349 - [Neo3] K Modify Tamper driver for VP3350
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350
- FWE-813 - [Neo3] K Contact L1
- FWE-713 - [Neo3] K Key Management
### Known issues:
- Use 99-03 command to switch the communicate interface like BT and HID.
- Must use 90-25 download the product device tree configuration to enable the driver.
### Document:
- [TS Command List](https://atlassian.idtechproducts.com/confluence/display/NEO3/TS+Command+List)
...
### Release Notes:
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-896 - [Neo3] K Setup Power Management in IDLE loop
- FWE-1227 - [Neo3] K Watchdog System
- FWE-1083 - [Neo3] K Default Device Tree Configuration
### Known issues:
- 2C-01 2C-02 Read contactless card failed.
- C7-3A Get tamper information is wrong.
...
### Release Notes:
- Release fm file for DVT 2 production.
- Release bootloader and default device tree in srec.
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1205 - [Neo3] K CFG ID for VP3350
### Known issues:
- F8-00 Set antenna parameter crashed.
...
### Known issues:
- C73A Tamper get DRS failed due to didn't enable tamper.
- 6014 Contact get reader status incorrect parameter response.
- 2C18 ICC power off command get incorrect parameter response.
- 7781 should support reset BLE name and password.
...
Tools
...
| title | Bootloader |
|---|
...
| title | Docklight Script |
|---|
...
| title | Tool |
|---|
...
| title | SDK Demo |
|---|
Windows
...
Android
...
iOS
...
| title | Event Log |
|---|
...
Documents
...
| title | Document |
|---|
...
Table of Contents
Firmware
...
| title | Neo 3 |
|---|
Neo 3 Firmware release table
...
### Release Notes:
- Support protected build.
- Bootloader 1.01 version
- Enable and config power manager default timer for each config.
- FWE-1395 [Neo3]K VP3350 Power manager state diagram support
- FWE-1386 [Neo3]K PCI State Machine
- FWE-1403 [Neo3]K Add Power Management to TM4
- FWE-1134 Tag 9F02 response error in PDOL.
- FWE-713 [Neo3]K Key Management
- FWE-1353 [Neo3]K Task Transaction Example
- FWE-1009 [Neo3]K TDES DUKPT Card Data Cipher
- FWE-1366 [Neo3]K Add BT communication with IDG commands on VP3350
- FWE-875 [Neo3]K Firmware Update via Bootloader.
- FWE-673 [Neo3]K Tamper Management
- FWE-1394 [Neo3]K When K81 PM enabled, the EMVSIM communication is abnormal
### Known issues:
- Syslog auto start is disabled.
- Passthrough charging must connect female then connect male.
- Can't communicate with phone via male connecter.
- Can't update device tree config via FM update tool.
...
### Planning:
- [VP3350 - 1.00.030.0000 - 20211224](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.030.0000+-+20211224)
### Release Notes:
- Core MSR ICC Transaction
- Detect Tamper switch in 9013 command.
- Modify the K81 socket architecture in Startup Reader System to save memory usage.
- Add coin battery initial driver in device tree config.
- Passthrough charging.
- BT communication.
### Known issues:
- Power manager is disabled.
- Syslog auto start is disabled.
- Passthrough charging must connect feamale then connect male.
- Can't communicate with phone via male connecter.
...
### Release Notes:
- FWE-1142 - [Neo3] K TAL Contact Integration
- FWE-1140 - [Neo3] K TAL Application Framework
- FWE-1339 - [Neo3] K Device Tree Commads
- FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration
- FWE-1349 - [Neo3] K Modify Tamper driver for VP3350
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350
- FWE-813 - [Neo3] K Contact L1
- FWE-713 - [Neo3] K Key Management
### Known issues:
- Use 99-03 command to switch the communicate interface like BT and HID.
- Must use 90-25 download the product device tree configuration to enable the driver.
### Document:
- [TS Command List](https://atlassian.idtechproducts.com/confluence/display/NEO3/TS+Command+List)
...
### Release Notes:
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-896 - [Neo3] K Setup Power Management in IDLE loop
- FWE-1227 - [Neo3] K Watchdog System
- FWE-1083 - [Neo3] K Default Device Tree Configuration
### Known issues:
- 2C-01 2C-02 Read contactless card failed.
- C7-3A Get tamper information is wrong.
...
### Release Notes:
- Release fm file for DVT 2 production.
- Release bootloader and default device tree in srec.
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1205 - [Neo3] K CFG ID for VP3350
### Known issues:
- F8-00 Set antenna parameter crashed.
...
### Known issues:
- C73A Tamper get DRS failed due to didn't enable tamper.
- 6014 Contact get reader status incorrect parameter response.
- 2C18 ICC power off command get incorrect parameter response.
- 7781 should support reset BLE name and password.
...
Tools
...
| title | Bootloader |
|---|
...
| title | Docklight Script |
|---|
...
| title | Tool |
|---|
...
| title | SDK Demo |
|---|
Windows
...
Android
...
iOS
...
| title | Event Log |
|---|
...
Documents
...
| title | Document |
|---|
...