| Table of Contents |
|---|
Objective Application
- Felica L1 Test
- Mifare L1 Test
Description & Usage
This SDK is used to test Felica Card Reader Test by Poll For Token IDG Commands.
- V1.00.002-C02 or above
Step | Description |
|---|---|
| 01 | Select Interface : USB-HID |
| 02 | Select 02-Cust Script Select script File "Mifare_V02_VivoPay Read.txt" |
| 03 | Select 60 seconds as test duration. You may select R1 = 1 round R10 = 10 rounds |
| 04 | Set Tx/Rx Single Command Timeout Value. Suggest add it up to 2000 ms (= 2 seconds). |
| 05 | Press "START" button to link, run, and unlink UUT. where O = PASS and Successful 1 round (Issuing All Commands Good in the script file). . = Failed, one or more commands Failed. |
Document
| Item | Description | ||||||
|---|---|---|---|---|---|---|---|
| This is new IDG Command format Provide a new preselect card type in Tx data (A,B,C, and combination of them) |
Download Link
| Version | Update Info | Approved |
|---|---|---|
V1.00.031 | ||
031.B.zip | ||
V 1.00.003 | ||
1.+ USB-KB Interface Support. 2.+ RS232 Interface Support. 3.Remove redundancy commands (PT-On / Off / Antenna OFF) while connecting to UUT over USB-HID / KB interfaces. | ||
V 1.00.002 | ||
1.Customized Docklight Logs Loading Allowed. Ex: Key word = "[TX] - " /// 1. Enable Pass-Through mode [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 01 00 01 01 1D 19 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 00 1C 9B /// 2. Poll for token [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 02 00 02 0A 14 E3 51 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 05 03 D3 AC 5A E3 2D 39 /// 3. Mifare auth (2C-06) [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 06 00 08 01 01 FF FF FF FF FF FF 4B C8 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 00 1C 9B /// 4. Mifare Read Blocks (2C-07) [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 07 00 02 33 10 3F 8F [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 30 87 19 00 00 78 E6 FF FF 87 19 00 00 00 FF 00 FF B7 1A 00 00 48 E5 FF FF B7 1A 00 00 00 FF 00 FF 88 19 00 00 77 E6 FF FF 88 19 00 00 00 FF 00 FF 4C D2 ---------- 2. Time Limited Setting, Customized Script. Docklight Log Like.
---------- 3. Script Example. key word = "[TX] - " Format : "[TX] - 56 69 56 4F 74 65 63 68 32 00 2C 02 00 02 00 14 06 6B" Key word = "[TX] - " V2 Header = "5669564F746563683200" Cmd Set = "2C02" Tx Dat = "0014" Trim the tail 2 bytes (CRC) = "066B" | ||
/POLLFORTOKENTYPE=MIFARE --> indicatee Mifare Test Method.
old = 100 new = 50
FW Build:VP3300 USB NEO v1.01.054, VP3300 USB-C Type | ||
V 1.00.001 | ||
Update 2C-02 command to meet new firmware. | FW: VP3300 USB (Legacy: Goose Run, VP4880) | |
| V 1.00.001-C02, 2017 Nov 07 1.Replace "X" with "." | ||
V 1.00.001-C01, 2017 Nov 03 1.Initial Version | ||
Deprecated - Description & Usage, V 1.00.001-C05 or aged.
This SDK is used to test Felica Card Reader Test by Poll For Token IDG Commands.
| Function | Comment | Run Steps |
|---|---|---|
| A | Set Test Rounds of Poll For Token | 1 |
| B | Connection & Start test | 2 |
| C | Stop Test Rounds & Close Connection | 3 |
| D | Logging Windows | N/A |